RS PRO 8977034 Magnetic Scale Inhibitor Instruction Manual
- June 3, 2024
- RS PRO
Table of Contents
RS PRO 8977034 Magnetic Scale Inhibitor
Installation Instructions
-
Turn off water supply.
-
Drain relevant pipework or systern where the CalMag unit is to be installed.
-
Allow time for system to cool down if fitted in line.
-
Cut pipe to suit length of uni1. The unit should be installed a min imum of 1 metre from an appliance or on the incoming mains after the stop cock.
-
Push the unit into place. ensuring that the fitt ings are pushed ful ly into position. Tighten the compression fi tt ings to make a seal. Do not overti hten.
-
Re-open the system slowly. Check for leaks.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>