VonHaus 2514086 1850W 61CM Black Stove Heater Instruction Manual
- June 5, 2024
- vonhaus
Table of Contents
VonHaus 2514086 1850W 61CM Black Stove Heater
Safety Instructions
WARNING
INTENDED USE.
This 1850W 61cm Black Stove Heater designed for light domestic use only. It is
not intended for heavy duty, commercial or industrial use, and is not suitable
for use outdoors.
WARNING! Do not use this appliance to dry clothes. This appliance cannot
be used by children or persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have not been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision. WARNING! This product is not suitable to be used on long pile
carpets. Use this appliance only as described in this manual. Any other use is
not recommended by the manufacturer and may cause fire, electric shock or
injury.
PRIOR TO USE.
Remove the packaging and make sure that the appliance is intact. If in doubt,
do not use the appliance and contact DOMU Brands Customer Services. Do not
leave packaging materials such as bags and staples within reach of children.
Dispose of packaging carefully and with consideration for the environment. It
is recommended that you retain the appliance box for seasonal storage. For
your convenience, record the date you received the appliance on the ‘Warranty’
page of these instructions and attach your proof of purchase. Retain this
information in the event that a warranty service is required.
SAFETY INFORMATION.
When using any electrically-powered appliance, basic safety precautions should
always be followed to reduce the risk of fire, electrical shock, or injury to
persons or property.
CABLES AND PLUGS.
Check to ensure your electricity supply matches that shown on the rating label
of the appliance. The appliance must only be used as rated. Do not operate any
appliance with a damaged cord or plug, or after the appliance malfunctions or
has been dropped or damaged in any manner. Take to a qualified electrical
person for service and repair. Do not connect the appliance to the mains
voltage until completely assembled and adjusted. Unroll the cord before
operating. Operating with a coiled cord may cause overheating and risk of
fire. The use of an extension cord with this appliance is not recommended. Do
not allow the cord to come into contact with the appliance surface during
operation. Do not run the cord under carpeting, mats or rugs etc. Arrange the
cord away from traffic areas so that it will not be tripped over. Do not
twist, kink or wrap the cord around the appliance as this may cause the
insulation to weaken and split. Always unplug the appliance when not in use.
Do not leave it unattended. Always switch off the appliance before unplugging
it from the power socket. Always hold the plug when removing it from the wall,
do not pull the cord. CAUTION: In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off.
RISK OF PERSONAL INJURY.
Use this appliance only as described in this manual. Do not use this appliance
with any type of external timer. Always operate upright, on a flat surface
only. This appliance heats up when in use. To avoid burns, do not touch the
front of the appliance or any of the grilles or vents. WARNING! DO NOT COVER.
Do not cover in any manner as the appliance may overheat and become a fire
risk. Keep all objects at least 1 metre from the front, side and rear of the
appliance. Do not operate the appliance with wet hands. Do not immerse in
liquid or use the appliance near water as this could create an electrical
shock hazard. If the appliance accidentally comes into contact with water,
switch off the power supply and do not touch the appliance. Never attempt to
remove the cover of the appliance. Repairs requiring opening the appliance or
access to internal parts must be carried out by a qualified electrician or
repair service professional. There are no user-serviceable parts of this
appliance (excluding the plug fuse). Before moving the appliance, switch it
off by unplugging it from the wall and allowing it to cool.
POSITION YOUR HEATER.
This appliance is designed to be placed on a hard, level surface. When
positioning, please keep the following points in mind: Do not locate in areas
of high foot traffic. To avoid accidents, always ensure that the power cord
and appliance are in full view. Do not fit the appliance in confined spaces
such as cupboards or wardrobes. Do not operate the appliance in areas where
gasoline, paint or other flammable liquids are used or stored. Do not operate
the appliance in bathrooms, laundry areas or similar moist indoor locations.
Do not use in the immediate surroundings of a bath, shower or swimming pool.
The appliance must not be located immediately below or in front of a socket
outlet. The socket must always be accessible in order to disconnect the
appliance from the electrical supply for maintenance. Store the Heater
carefully in a dust-free area during the off season. It is ideal to store the
Heater in the box in which it was supplied. Neatly wind the cord of the Heater
to prevent damage.
SPECIFICATION
- Door
- Fire Display
- Control Panel3
INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATER
| Model | 2514086 |
|---|---|
| Item | Symbol |
Heat Output
| | Type of heat input for Electrical Storage Heaters only (select one)
Nominal Heat Output| ****
P nom
| ****
1.85
| ****
kW
| | Manual heat charge control with integrated thermostat.| ****
N/A
Minimum Heat Output (indicative)| ****
P min
| ****
0.925
| ****
kW
| | Manual heat charge control with room and/or outdoor temperature feedback.|
N/A
Maximum Continious Heat Output| ****
P max
| ****
1.85
| ****
kW
| | Electronic heat charge control with room and/or outdoor temperature feedback| ****
N/A
Auxiliary electricity consumption| | | Fan assisted heat output| N/A
At nominal heat output| ****
EL max
| 0,012 (fan Motor)| ****
kW
| | Type of heat output/room temperature control (select one)
At minimum heat output| ****
EL min
| 0,012 (fan Motor)| ****
kW
| | Single stage heat output and no room temperature control| ****
no
In standy mode
| ****
EL SB
| ****
0,0
| ****
kW
| | Two or more manual stages, no room temperature control| ****
no
| | | With mechanical thermostat room temperature control| ****
yes
| With electronic room temperature control| ****
no
| | Electronic room temperature control plus day timer| ****
no
| Electronic room temperature control plus week timer| ****
no
| Other control options (multiple selections possible)
| room temperature control with prescence detection| ****
no
| room temperature control with open window detection| ****
no
| with distance control option| no
| | with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact Details| DOMU Brands Ltd, 4th & 5t| h Flo| or, The
Tower, Deva City Office Park, Salford, M3 7BF
FOOT ASSEMBLY
- Take the Heater and turn it upside down, ensure to lift the Heater carefully, do not tip.
- Take the 4 legs and align them over the holes in the base of the Heater.
- Screw-in each screw and ensure the feet are secured, turn the Heater upright onto its legs.
CONTROLS
OPERATION
Insert the plug into main socket.
TO ACTIVATE THE HEATING FUNCTION: Turn the Thermostat Dial to maximum by
turning clockwise and switch on the Fan Switch.For Low Heat – Activate 1 Heat
Switch
For High Heat – Activate the second Heat Switch (1850W combined). Turn down
the Thermostat Control Knob to the desired temperature by turning
anticlockwise. To activate the flame effect, turn on the Flame Effect Switch.
Control the intensity of the flame effect by turning the Dimmer Dial clockwise
to intensify and anticlockwise to reduce the effect. Close the door once you
have finished adjusting the settings.
BULB REPLACEMENT
Unplug from the mains supply and allow to completely cool. Open the door and locate the two screws, unscrew both and keep safe. Pull the Log Bed from both ends to lift up the Log Bed decoration. The two bulbs are located underneath. Remove the defective bulb by pulling it out of the holder. Replace with a new bulb.
CAUTION: Take care not to touch the bulb with bare hands and ensure that the bulb is pushed in correctly. To reassemble, follow the above instructions in reverse order. The bulbs fitted to this Heater are 220-240V ~ 50Hz 25W G9 halogen bulbs. Due to the indeterminate life span and ease of replacement, the light bulbs are specifically excluded from the guarantee.
CLEANING & CARE
CAUTION:
- Switch off the Heater and disconnect the plug from the power socket.
- Wait for the Heater to cool completely before cleaning.
- To remove dust on external surfaces, wipe the Heater with a damp (not wet) lint-free cloth rinsed in hot soapy water only.
- Do not use any harsh detergent or abrasive cleaners.
- Do not spray with any liquids or submerge in liquid or water.
- Do not attempt to clean the inside of the Heater. Do not attempt to open the Heater casing at any time. There are no user-serviceable parts.
TROUBLESHOOTING
PROBLEM
NO LIGHT FROM THE FLAME EFFECT
| SOLUTION
Possibly a bulb failure. Remove the faulty bulb as detailed in the ‘Bulb Replacement’ section.
---|---
LIGHT BUT NO HEAT
| ****
Check that the Heat Switches are set to on position.
THE HEATER WILL NOT POWER ON
| ****
Ensure the Heater is switched on and connected to mains power.
Activate the Power Selector Switches and Heat Switches Check the fuse by replacement.
THE HEATER IS NOT HEATING UP
| Check that the Heater is plugged in and switched on at the mains outlet.
Make sure that the Heater has not gone into overheat protection mode.
The Vents may require need cleaning.
THE HEATER BECOMES DAMAGED
| ****
Discontinue use and contact DOMU Brands Customer Services.
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE
If you are having difficulty using this product and require support, please contact [email protected]
WARRANTY
To register your product and find out if you qualify for a free extended warranty please go to www.Vonhaus.com/warranty.
Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the Warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.