tp-link M7200 4G LTE Mobile Wi-Fi Installation Guide

tp-link M7200 4G LTE Mobile Wi-Fi Installation Guide

Install the SIM Card and Battery

• a. Replace the cover. Remove the back cover.
  

• b. Install your SIM card.
  

• c. Install the provided batter.
  

• d. Replace the cover.
  

Connect to the Internet

• a. Press and hold the Power button to power on the Mobile Wi-Fi.

• b. Connect your wireless device to the Mobile Wi-Fi using the default SSID and Wireless Password.
  

  • You can also find the default SSID and Wireless Password on the product label under the battery.

Enjoy the internet!

Managing Your Mobile Wi-Fi

Manage your Mobile Wi-Fi using any of the methods below. You can customize Wi- Fi settings, block Wi-Fi devices and more.

tp MiFi App

1. Get the tp MiFi app from App Store or Google Play, or by scanning the QR code.
   
   
   

2. Connect your wireless device to the Mobile Wi-Fi.

3. Create a password to log in.

Web Management Page

1. Connect your wireless device to the Mobile Wi-Fi. If it is a computer, make sure it is set to obtain an IP address automatically.
2. Launch a web browser and visit http://tplinkmifi.net or http://192.168.0.1. Create a password to log in.

For technical support, user manuals and more information, please visit https://www.tp-link.com/support, or simply scan the QR code.

Charging Your Mobile Wi-Fi

Method 1

Via a Wall Outlet (Recommended)

Method 2

Via a Computer

• The Battery LED will be solid green when the Mobile Wi-Fi is fully charged.
• The power adapter is not provided by TP-Link.

FAQ (Frequently Asked Questions)

Q1. What should I do if I cannot access the internet (the Internet LED

doesn’t light up)? A. Log into the web management

A. Log into the web management page (http://tplinkmifi.net), and check the following: · Check PIN status If the current SIM card status is PIN Locked, your SIM card is PIN protected and you need to unlock it using the PIN code provided by your mobile carrier. · Verify the mobile carrier parameters Go to Advanced > Dial-up > Dial-up Settings, then verify that the parameters (i.e. APN, username and password) provided by your mobile carrier are correct. If they are incorrect, enter the correct information or create a new profile, then save the settings. · Check the Data Roaming settings If your SIM card is operated in a roaming service area, go to Advanced > Dial-up > Dial-up Settings, enable Data Roaming and save the settings. · Check Mobile Data Go to Advanced > Dial-up > Dial-up Settings to verify that Mobile Data is On. If not, enable it and save the settings. · Check Data Limit Go to Advanced > Data Usage Settings to check whether your data usage has exceeded the Total/Monthly allowance.

Q2. How do I restore the Mobile Wi-Fi to its factory default settings?

A. With the Mobile Wi-Fi powered on, remove the cover, then use a pin to press and hold the Reset button until all LEDs turn on momentarily. Note: Restoring the device to its factory defaults will clear all your settings

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed

CAUTION!

• Avoid replacement of a battery with an incorrect type that can defeat a safeguard.
• Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

CAUTION!

• Risk of explosion if the battery is replaced by an incorrect type.

References

• Trying to configure the MiFi? | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link
• CE Regulatory Compliance | TP-Link
• CE | TP-Link Magyarország

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>