beko Refrigerator User Manual

: June 7, 2024
: Beko

Refrigerator
User manual

beko Refrigerator

CCFM1582W – CRFG1582W – CFG1582S
CFG1582B – CFG1582W – CJFF1582W
CJFF1582PS – CCFM3582W – CFG3582B
CFG3582W – CFG3582S – CJFF3582W
CRFG3582W – CFG1501B

Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual, and store in a safe location close to the appliance for easy future
reference.
This user manual may also be applicable to several other models. Differences between models will be listed.
If you have any questions or concerns, please call our contact center or find help and information online at www.beko.co.uk
Symbols and their descriptions
This instruction manual contains the following symbols:
****Important information or useful usage tips.
Warning against dangerous conditions for life and property.
Warning against electric voltage.

Your refrigerator

Congratulations on your choice a Beko quality Appliance which has been designed to give you service for many years.

beko Refrigerator - Your refrigerator

1. Temperature setting control
2. Cabinet shelves
3. Defrost water collection channel
4. Salad crisper
5. Freezer fan
6. Frozen food storage drawers| 7. Adjustable feet
8. Dairy compartment
9. Egg tray
10. Door shelves
11. Fridge compartment
12. Freezer compartment
---|---

****Figures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

Warnings

Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed.
If transported horizontally leave to stand upright for at least 4 hours before switching on to allow compressor oil to settle
If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the treatment of young children.
This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.
Do not dispose of the appliance on a fire. At Beko, the care and protection of our environment is an ongoing commitment. This appliance which is among the atest range introduced is particularly environmentally friendly. Your appliance contains non-CFC / HFC natural substances in the cooling system (Called R600a) and n the insulation (Called cyclopentane) which are is potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit/pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.
We suggest you contact your local authority for disposal information and facilities available.
To obtain the best possible performance and trouble-free operation from your appliance it is very important to carefully read these instructions
On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.
Ensure that the plug remains readily accessible. Do not use multiple adapters or extension cables.
Failure to observe these instructions may invalidate your right to free service during the guarantee period.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer
We suggest you keep these instructions in a safe place for easy reference.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children should be supervised to ensure that they do not play with the appliance.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency is shown on the rating plate inside the appliance corresponds to your electricity supply.
The rating label is on the left-hand side of the fridge inner liner.
We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

WARNING:
When positioning the appliance ensure the supply cord is not trapped or damaged. Should the mains lead of the appliance become damaged or should it need replacing at any time, it must be replaced by a special purpose-made mains lead which can only be obtained from a Beko authorized service agent?

Warning! This appliance must be earthed

If the fitted molded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
The molded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted.
Colour of the replacement the fuse cover must be the same color as that visible on the pin the face of the plug. Fuse covers are available from any good electrical store.

Important! Fitting A
Different Plug

As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug proceed as follows: (See diagram).
Connect the green-yellow or green (Earth) wire to the terminal in the plug marked ‘E’ or with the symbol or colored green and yellow or green.
Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or colored black.
Connect the brown (Life) wire to the terminal in the plug marked ‘L’ or colored red.
With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

beko Refrigerator - CORD GRIP

Energy saving tips

Ensure your appliance is installed in a well-ventilated area.
Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at a minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry perishable food.
Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.
Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.
Energy consumption of this appliance is measured while the freezer compartment is loaded without the use of top-shelf lid and the drawers except for the bottom drawer.
It is advised that the freezer compartment is loaded without the use of drawers except for the bottom drawer in order to achieve maximum loading capacity.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE
Directive (2012/19/ EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high-quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other
wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Installation

Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed.

**Points to be paid attention to when the relocation of the

refrigerator**

Your refrigerator should be unplugged.Before transportation of your refrigerator, it should be emptied and cleaned.
Before it is re-packaged, shelves, accessories, crisper, etc. inside your refrigerator should be fixed with adhesive tape and secured against impacts. The package should be bound with thick tape or sound ropes and the transportation rules on the package should be strictly observed.
Original packaging and foam materials should be kept for future transportations or moving.

Check the following before you start to use your refrigerator:

Attach 2 plastic wedges as illustrated below. Plastic wedges are intended to keep the distance hich will ensure the air circulation between your refrigerator and the wall. (The picture is drawn up as a representation and it is not identical with your product.)
Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.
The condenser of your appliance is located on the back as shown below. In order to achieve better energy efficiency with lower energy consumption, please pull the condenser towards yourself as illustrated in the picture below.
*may not be available in all models
Connect the plug of the refrigerator to the wall socket. When the fridge door is opened, the fridge internal lamp will turn on.
When the compressor starts to operate, a sound will be heard. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running and this is quite normal.
The front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

Electrical connection

Connect your product to a grounded socket that is being protected by a fuse with the appropriate capacity.
Important:
The connection must be in compliance with national regulations.

The power plug must be easily accessible after installation.
The electrical safety of your refrigerator shall be guaranteed only if the earth system in your house complies with standards.
The voltage stated on the label located at the left inner side of your product should be equal to your network voltage.
Extension cables and multi-plugs must not be used for the connection.
A damaged power cable must be replaced by a qualified electrician.
Product must not be operated before it is repaired! There is the risk of electric shock!

Disposing of the packaging

The packing materials may be dangerous for children. Keep the packing materials out of the reach of children or dispose of them by classifying them in accordance with the waste instructions stated by your local authorities. Do not throw away with regular house waste, throw away on packaging pick up spots designated by the local authorities.
The packing of your refrigerator is produced from recyclable materials.

Disposing of your old refrigerator

Dispose of your old refrigerator without giving any harm to the environment.

You may consult your authorized dealer or waste collection center of your municipality about the disposal of your refrigerator.
Before disposing of your refrigerator, cut out the electric plug and, if there are any locks on the door, make them inoperable in order to protect children against any danger.

Placing and Installation

If the entrance door of the room where the refrigerator will be installed is not wide enough for the refrigerator to pass through, then carefully remove the doors of your refrigerator and pass it sideways through the door.

Install your refrigerator to a place that allows ease of use.
Keep your refrigerator away from heat sources, humid places, and direct sunlight.
There must be appropriate air ventilation around your refrigerator in order to achieve an efficient operation. If the refrigerator is to be placed in a recess in the wall, there must be at least 5 cm distance from the ceiling and at least 5 cm from the wall. Do not place your product on the materials such as a rug or carpet.
Place your refrigerator on an even floor surface to prevent jolts.
Important: Care must be taken while cleaning/carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands.
Important: This appliance is not designed for stacking with any other appliance. When positioning your appliance, take care not to damage your flooring, pipes, wall coverings, etc.
Important: Make sure that the mains cable is not caught under the appliance during and after carrying/moving the appliance, to avoid the mains cable becoming cut or damaged
Beko declines to accept any liability should the instructions not be followed.

Changing the illumination lamp

To change the Bulb/LED used for illumination of your refrigerator, call your authorized service.
The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place foodstuffs in the refrigerator/ freezer in a safe and comfortable way. The lamps used in this appliance have to withstand extreme physical conditions such as temperatures
below -20 °C.
(only chest and upright freezer)

Adjusting the legs

If your refrigerator is unbalanced;
You can balance your refrigerator by turning its front legs as illustrated in the figure. The corner where the leg exists is lowered when you turn in the direction of the black arrow and raised when you turn in the opposite direction. Taking help from someone to slightly lift the refrigerator will facilitate this process.

beko Refrigerator -refrigerator will

Preparation

Your refrigerator should be installed least 30 cm away from heat sources such as hobs, ovens, centralheater, and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight.
This appliance is equipped with ‘Freezer Guard’ which ensures that at the advised setting [4 – four on the control] the frozen food in the freezer will not defrost even if the ambient temperature falls as low as -15 °C. So you may then install your appliance in a garage or an unheated room without having
to worry about frozen food in the freezer being spoilt. However, at low ambient temperatures mentioned above,fridge contents are likely to freeze,so check and consume food in the fridge accordingly. When the ambient temperature returns to normal, you may change the setting to suit your needs.
Please make sure that the interior of your refrigerator is cleaned thoroughly.
If two refrigerators are to be installed side by side, there should be at least 2 cm distance between them.
When you operate your refrigerator for the first time, please observe the following instructions during the initial six hours.
The door should not be opened frequently.
It must be operated empty without any food in it.
Do not unplug your refrigerator. If a power failure occurs out of your control, please see the warnings in the “Recommended solutions for the problems” section.
Original packaging and foam materials should be kept for future transportations or moving.
The baskets/drawers that are provided with the chill compartment must always be in use for low energy consumption and for better storage conditions.
Food contact with the temperature sensor in the freezer compartment may increase the energy consumption of the appliance. Thus any contact with the sensor(s) must be avoided.
In some models, the instrument the panel automatically turns off 5 minutes after the door has closed.
It will be reactivated when the door has opened or pressed on any key.
Due to temperature change as a result of opening/closing the product door during operation, condensation on the door/body shelves and the glass containers isnormal.
Since hot and humid air will not directly penetrate into your product when the doors are not opened, your product will optimize itself in conditions sufficient to protect your food. Functions and components such as compressor, fan, heater, defrost, lighting, display and so on will operate according to the needs
to consume minimum energy under these circumstances.

Reversing the doors

Proceed in numerical order beko Refrigerator - Reversing the
doors

Using your appliance

The operating temperature is regulated by temperature control.

beko Refrigerator - y the temperature control

1=Lowest cooling setting (Warmest setting).
5=Highest cooling setting (Coldest setting).

The average temperature inside the fridge should be around +5°C.
Please choose the setting according to the desired temperature.
Please note that there will be different temperatures in the cooling area.
The coldest region is immediately above the vegetable compartment.
The interior temperature also depends on ambient temperature, the frequency with which the door is opened, and the number of foods kept inside.
Frequently opening the door causes the interior temperature to rise.
For this reason, it is recommended to close the door again as soon as possible after use.
The interior temperature of your refrigerator changes for the following reasons;

Seasonal temperatures,
Frequent opening of the door and leaving the door open for long periods,
Food put into the refrigerator without cooling down to room temperature,
The location of the refrigerator in the room (e.g. exposing to sunlight).
You may adjust the varying interior temperature due to such reasons by using the thermostat.

Cooling Food storage

The fridge compartment is for the short-term storage of fresh food and drinks.
Store milk products in the intended compartment in the cooler/freezer.
Bottles can be stored in the bottle holder or in the bottle shelf of the door.
Raw meat is best kept in a polyethylene bag in the compartment at the very bottom of the cooler/ freezer.
Allow hot foods and beverages to cool to room temperature prior to placing them in the cooler/freezer.

Attention
Store concentrated alcohol only standing upright and tightly closed.
Attention
Do not store explosive substances or containers with flammable propellant gases (canned cream, spray cans etc.) in the freezer. There is a danger of
explosion.

Storing Frozen Food

Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer’s instructions for a frozen food storage compartment.
To ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained, the following should be remembered:

Put packets in the freezer as quickly as possible after purchase.
Ensure that contents are labeled and dated.
Do not exceed “Use By”, “Best Before” dates on the packaging.
If there is a power failure do not open the door. Frozen food should not be affected if the failure lasts for less than 20 hrs. If the failure is longer, then the food should be checked and either eaten immediately or cooked and then re-frozen.

Freezing Fresh Food

Please observe the following instructions to obtain the best results.
Do not freeze too large a quantity at any one time. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible.
Do not exceed the freezing capacity of your appliance in 24 h which is 4 kg (8.8 lb)Placing warm food into the freezer compartment causes the refrigeration compressor to operate continuously until the food is frozen solid. This can temporarily lead to excessive cooling of the refrigeration compartment.When freezing fresh food turn the thermostat knob towards MAX. Small quantities of food up to 1/2 kg. (1 lb) can be frozen without having to rotate the temperature control knob.
You may place fresh food to be frozen in any part of the freezer.
Take special care not to mix already frozen food and fresh food.

Placing the food

Egg tray	Egg
Fr iiddgge compartment shelves	Food in pans, covered plates and closed

containers
Fr middle compartment door shelves| Small and packaged food or drinks (such as milk, fruit juice, and beer)
Crisper| Vegetables and fruits

Defrosting of the appliance

The appliance defrosts automatically.
Check regularly to see if the drain pipe is clogged or not and clear it with the stick in the hole when necessary.

Maintenance and cleaning

ever use gasoline, benzene, or similar substances for cleaning purposes.
We recommend that you unplug the appliance before cleaning.
Never use any sharp abrasive instrument, soap, household cleaner, detergent, and wax polish for cleaning.
Use lukewarm water to clean the cabinet of your refrigerator and wipe it dry.
Use a damp cloth wrung out in a solution of one teaspoon of bicarbonate of soda to one pint of water to clean the interior and wipe it dry.
Make sure that no water enters the lamp housing and other electrical items.
If your refrigerator is not going to be used for a long period of time, unplug the power cable, remove all food, clean it and leave the door ajar.
**** Check door seals regularly to ensure they are clean and free from food particles.
To remove door racks, remove all the contents and then simply push the door rack upwards from the base.
Never use cleaning agents or water that contains chlorine to clean the outer surfaces and chromium-coated parts of the product. Chlorine causes
corrosion on such metal surfaces.
Do not use sharp, abrasive tools, soap, household cleaning agents, detergents, kerosene, fuel oil, varnish etc. to prevent removal and deformation of the prints on the plastic part. Use lukewarm water and a soft cloth for cleaning and then wipe it dry.

Protection of plastic surfaces

****Do not put the liquid oils or oil-cooked meals in your refrigerator in unsealed containers as they damage the plastic surfaces of your refrigerator. In case of spilling or smearing oil on the plastic surfaces, clean and rinse the relevant part of the surface at once with warm water.

Troubleshooting

Check this list before contacting the service. Doing so will save you time and money. This list includes frequencomplaints that are not related faulty workmanship or materials.
Certain features mentioned herein may not apply to your product.
The refrigerator is not working.

The power plug is not fully settled.

Plug it in to settle completely into the socket.
The fuse connected to the socket powering the product or the main fuse is blown. >>> Check the fuses.
Condensation on the sidewall of the cooler compartment (MULTI-ZONE, COOL, CONTROL, and FLEXI ZONE).
The door is opened too frequently >>> Take care not to open the product’s door too frequently.
The environment is too humid. >>>Do not install the product in humid environments.
Foods containing liquids are kept in unsealed holders. >>> Keep the foods containing liquids in sealed holders.
The product’s door is left open. >>>Do not keep the product’s door open for long periods.
The thermostat is set to too low a temperature. >>> Set the thermostat to the appropriate temperature.
The compressor is not working.
In case of sudden power failure or pulling the power plug off and putting back on, the gas pressure in the product’s cooling system is not balanced, which triggers the compressor thermic safeguard.
The product will restart after approximately 6 minutes. If the product does not restart after this period, contact the service.
Defrosting is active. >>> This is normal for a fully automatic defrosting product. The defrosting is carried out periodically.
The product is not plugged in. >>>Make sure the power cord is plugged in.
The temperature setting is incorrect.>>> Select the appropriate temperature setting.
The power is out. >>> The product will continue to operate normally once the power is restored.

The refrigerator’s operating noise is increasing while in use.

The product’s operating performance may vary depending on the ambient temperature variations. This is normal and not a malfunction.
The refrigerator runs too often or too long.
The new product may be larger than the previous one. Larger products will run for longer periods.
The room temperature may be high. >>> The product will normally run for long periods in higher room temperature.
The product may have been recently plugged in or a new food item is placed inside. >>> The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside. This is normal.
Large quantities of hot food may have been recently placed into the product. >>> Do not place hot food into the product.
The doors were opened frequently or kept open for long periods. >>> The warm air moving inside will cause the product to run longer. Do not open the doors too frequently.
The freezer or cooler door may be ajar. >>> Check that the doors are fully closed.
The product may be set to a temperature too low. >>> Set the temperature to a higher degree and wait for the product to reach the adjusted temperature.
The cooler or freezer door washer may be dirty, worn out, broken, or not properly settled. >>> Clean or replace the washer. Damaged / torn door washer will cause the product to run for longer periods to preserve the current temperature.
The freezer temperature is very low, but the cooler temperature is adequate.
The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
The cooler temperature is very low, but the freezer temperature is adequate.
The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
The food items kept in cooler compartment drawers are frozen.
The cooler compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.
The temperature in the cooler or the freezer is too high.
The cooler compartment temperature is set to a very high degree. >>> Temperature setting of the cooler compartment has an effect on the temperature in the freezer compartment. Wait until the temperature of relevant parts reaches a sufficient level by changing the temperature of cooler or freezer compartments.
The doors were opened frequently or kept open for long periods.

Do not open the doors too frequently.
The door may be ajar. >>> Fully close the door.
The product may have been recently plugged in or a new food item is placed inside. >>> This is normal.
The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside.
Large quantities of hot food may have been recently placed into the product. >>> Do not place hot food into the product.
Shaking or noise.
The ground is not level or durable.

If the product is shaking when moved slowly, adjust the stands to balance the product. Also, make sure the ground is sufficiently durable to bear the product.
Any items placed on the product may cause noise.

Remove any items placed on the product.
The product is making noise of liquid flowing, spraying, etc.
The product’s operating principles involve liquid and gas flows.

This is normal and not a malfunction.
There is a sound of wind blowing coming from the product.
The product uses a fan for the cooling process. This is normal and not a malfunction.
There is condensation on the product’s internal walls.
Hot or humid weather will increase icing and condensation. This is normal and not a malfunction.
The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently; if open, close the door.
The door may be ajar.

Fully close the door.
There is condensation on the product’s exterior or between the doors.
The ambient weather may be humid, this is quite normal in humid weather. >>> The condensation will dissipate when the humidity is reduced.
The interior smells bad.
The product is not cleaned regularly.

Clean the interior regularly using a sponge, warm water, and carbonated water.
Certain holders and packaging materials may cause odor. >>> Use holders and packaging materials without being free of odor.
The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Microorganisms may spread out of unsealed food items and cause malodor. Remove any expired or spoilt foods from the product.
The door is not closing.
Food packages may be blocking the door. >>> Relocate any items blocking the doors.
The product is not standing in full upright position on the ground. >>> Adjust the stands to balance the product.
The ground is not level or durable.

Make sure the ground is level and sufficiently durable to bear the product.
The vegetable bin is jammed.
The food items may be in contact with the upper section of the drawer. >>> Reorganize the food items in the drawer.
If The Surface Of The Product Is Hot.
High temperatures may be observed between the two doors, on the side panels, and at the rear grill while the product is operating. This is normal and does not require service maintenance!Be careful when touching these areas.
WARNING:
If the problem persists after following the instructions in this section, contact your vendor or an Authorised Service.
Do not try to repair the product.

BEKO UK AND IRELAND STANDARD MANUFACTURER GUARANTEE TERMS AND CONDITIONS
Your new Beko product is guaranteed against faulty materials, defective components or manufacturing defects.
The standard guarantee starts from the date of original purchase of the product and lasts for a period of twelve (12) months unless Beko plc (the Manufacturer”) agrees to extend the guarantee for the product in writing.
If you have purchased an American-style Fridge freezer, the standard guarantee starts from the date of original purchase of the product and lasts for a period of twenty-four (24) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
If you have any questions about the guarantee on your product (including how long it is valid), please contact your retailer or our contact center on 0333 207 971 (UK and Northern Ireland) or 01 862 3411 (Republic of Ireland) This guarantee does not in any way diminish or affect your statutory rights in connection with the product. This guarantee is in addition to your statutory rights as a consumer. If you have any questions about these rights, please contact the retailer from which you purchased the product. In certain circumstances, it is possible that your statutory rights may offer additional or higher levels of protection than those offered under the terms of this guarantee.
What is covered by this guarantee?

Repairs to the product required as a result of faulty materials, defective components or manufacturing defects.
Functional replacement parts to repair a product.
The costs of a Beko Approved Engineer to carry out the repair.

What is not covered?

Transit and delivery damage.
Cabinet or appearance parts, including but not limited to control knobs, flaps, and handles.
Accessories and/or consumable items including but are not limited to ice trays, scrapers, cutlery baskets, filters, and light bulbs.
Repairs necessary as a direct or indirect result of:
– Accidental damage, misuse or abuse of a product.
– An attempted repair of a product by anyone other than a Beko Approved Engineer (the “Engineer”).
– Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.
Repairs to a product operated at any time on commercial or non-residential household premises (unless we have previously agreed to the installation environment).
This guarantee is limited to the cost of repairing the product. To the extent permitted by law, the Manufacturer does not accept and will not be held liable
for any financial loss incurred in connection with the failure of any product to operate in accordance with the expected standards. Such financial loss includes
but is not limited to loss arising from:
Time taken off work.
Damaged food, clothing or other items.
Meals taken at restaurants or from takeaways.
General compensation for the inconvenience.

Important Notes

Your product is designed and built for domestic household use only.
The guarantee will automatically be void if the product is installed or is used in commercial or non-residential domestic household premises unless we have previously agreed to the installation environment.
The product must be correctly installed, located, and operated in accordance with the instructions contained in the User Instructions Booklet provided with your product.
Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric
Cookers (as incorrect installation may result in you having to pay for the cost of repairing the product).
Gas Cookers must be professionally installed by a Gas Safe (or Gas Networks Ireland for the Republic of Ireland) registered gas installer.
This guarantee is given in respect of products purchased and used within the United Kingdom and the Republic of Ireland.
This guarantee is effective from the initial date of purchase of a new product from an authorized retailer and will be void if the product is resold.
This guarantee does not apply to graded sales (where the product is purchased as a “second”).
Possession of a copy of these terms and conditions does not necessarily mean that a product has the benefit of this guarantee. If you have any questions, please call our Call Centre on the number set out above.
The Manufacturer reserves the right to terminate the guarantee if its staff or representatives are subjected to physical or verbal abuse in the course of carrying out their duties.
Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only.
Does Beko offer replacements?
This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a
repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
The Manufacturer will cover the costs and arrange for the delivery of the new product and for the return of the old product. Any costs related to disconnecting the faulty product and installing the replacement product will not be borne by the Manufacturer unless previously agreed to in writing. The original guarantee will continue to apply to the replacement product; the new product will not come with a new guarantee.

When will the repair take place?
Our Engineers work Monday to Friday 9.00 am to 5.00 pm. Appointments outside these hours may be possible at the sole discretion of the Manufacturer but cannot be guaranteed. Whilst our Engineers will endeavor to minimize inconvenience and to meet requests for specific timed appointments, this cannot be guaranteed. We will not be liable for delays or if it is unable to carry out a repair because a convenient appointment cannot be arranged.

Will there be any charge for the repairs?
It is your responsibility to provide evidence to the Engineer that your product is covered by this guarantee with a proof of purchase. The Manufacturer reserves the right to charge for the reasonable cost of any service call if:

You cannot provide evidence that your product is covered by this guarantee.
Where a service call has been made and the engineer finds that there is no fault with your product.
That your product has not been installed or operated in accordance with the User Instructions Booklet.
That the fault was caused by something other than faulty materials, defective components or manufacturing defects.
For missed appointments.
Payment of these costs is due immediately upon the Engineer providing you with an invoice. The Manufacturer reserves the right to terminate the guarantee
if you fail to pay the costs for the service call in a timely manner.

If you are a resident of the United Kingdom, this guarantee will be governed by English law and subject to the English Courts, save where you live in another
part of the United Kingdom, in which case the law and courts of that location will apply.
If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have jurisdiction.
This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU.
Beko plc is registered in England and Wales with company registration number 02415578
BEKO UK AND IRELAND BUILT-IN APPLIANCES GUARANTEE TERMS AND CONDITIONS

If you have purchased a built-in or integrated appliance and registered it within 90 days of purchase by completing the online registration form, then the standard 12-month guarantee will be extended to 24 months, under the same terms and conditions as detailed in our Standard Guarantee Terms and Conditions.
BEKO UK AND IRELAND PRO SMART INVERTER MOTOR GUARANTEE TERMS AND CONDITIONS
This 10-year guarantee relates to Beko products that feature the ProSmart Inverter Motor.
The ProSmart Motor guarantee terms and conditions are in addition to our Standard guarantee terms and conditions detailed in the previous section.
In order to activate the 10-year guarantee, you MUST register the appliance within 90 days of the original purchase date. You can register by first visiting Beko.co.uk/register and by following the online instructions.
Beko Freestanding appliances come with 12-month parts and labor guarantee as standard, Beko Built-in appliances come with a 12-month part and labor guarantee as standard. This is extended to 24 months, free of charge, upon registration of the appliance. When you register your appliance for the additional guarantee, you will automatically activate the ProSmart Motor 10 year guarantee. You do not need to register twice. (beko.co.uk/guarantee- terms).
To make a claim against your Beko ProSmart Inverter Motor Guarantee (the “Guarantee”), all customer and product details must be registered with Beko plc using the procedure outlined below.

This extra 9 years (for free standing appliances) or 8 years (for built-in or integrated appliances) guarantee is only effective after the expiration of the standard manufacturer’s guarantee.
It is only valid for the ProSmart Inverter motors of selected washing machines, washer-dryers, tumble dryers, and dishwashers. It does not cover any labor charge or any other components of the product. In addition, it is only valid for one replacement of the ProSmart motor during the extra 9-year (for free standing appliances) or 8 year (for built-in appliances) guarantee period.
To activate your guarantee, you MUST register your appliance within 90 days of the original purchase date, by visiting beko.co.uk/register.
Customers will receive a unique reference code as proof of guarantee validation by email or post, which must be quoted at the time of a claim being made.
Any repair/replacement of the ProSmart Inverter motor must only be carried out by an authorized Beko Service Agent (the “Service Agent”).
Labour for the repair/replacement of the ProSmart Inverter motor is not included in this guarantee and is chargeable directly by the Service Agent.
Any additional components fitted to the product at any time will not be covered by this guarantee and will be chargeable directly by the Service Agent.
The guarantee is not transferable and cannot be exchanged for cash.
There are no alternative or additional offers to this Guarantee.
The guarantee is exclusive of the manufacturer’s standard guarantee
The Terms and Conditions shown above are in addition to the standard terms and conditions of your product guarantee. Please read and refer to such Terms and Conditions when making any claim.
We may use the information you provide for marketing purposes and to analyze your purchasing preferences. We may keep your information for a reasonable period for these purposes in accordance with the applicable Data Protection Laws and General Data Protection Regulations (GDPR). You can opt
in to this service during the registration process. Further details are available at http://www.beko.co.uk/cookie-and-privacy.
These Terms and Conditions are governed by the laws of England and Wales; manufacturer: Beko plc, Beko House, 1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578.

HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE
Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation available should the product require attention under guarantee.
Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services. When you call us you may be required to input your serial number into your telephone keypad. For help please visit beko.co.uk/support/model-finder

The product model number is printed on the Operating Instruction Booklet / User guide
The product model and serial number are printed on the Rating Label affixed to the appliance.
The Retailer (Purchased from) and Date of purchase will be printed on your a purchase receipt or other proof of purchase paperwork
Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for requesting service under guarantee.

Model number	Serial number	Purchased from	Date of purchase

For service under guarantee or for product advice please call our Contact center
Before requesting service please check the troubleshooting guide in the Operating Instructions booklet, as a charge may be levied where no fault is found, and even though your product may still be under guarantee.
After arranging service the area around the product must be easily accessible to the Engineer, without the need for cabinets or furniture to be removed or moved.
It is your responsibility to ensure our Engineers have a clean and safe environment to carry out any repairs.
Please have your Model number and Serial number available when you call us, as you may be required to input your serial number into your telephone keypad during your call.

UK Mainland & Northern Ireland:
0333 207 9710
Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02, and are charged at the basic rate. Calls from landlines and mobiles are included in free call packages but please check with your telephone service provider for exact call charges.

Republic of Ireland:
01 862 3411
Service once the manufacturer’s guarantee has expired
If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreement document, otherwise, please
call us using the appropriate number above, where service can be obtained at a charge.
Should you experience any difficulty in obtaining service please call us on 0333 207 9710 or 01 862 3411
Contact us through our website
Send us a secure message through our online contact us form. Please visit our website, click Contact Us, and choose a product support topic from the list of
options. Complete the required details and click send a message.

Product registrations
For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit Beko.ie/register.