VonHaus 2500191 1300W Lawn Moss Rake Instruction Manual
- June 5, 2024
- vonhaus
Table of Contents
2500191 1300W Lawn Moss Rake
Instruction Manual
| Please read all instructions carefully before use and retain for future
reference.
---|---
| Protect your hands.
| Protect your ears.
| Protect your eyes.
| Wear a dust mask
| Protective clothing must be worn
| Wear suitable footwear
| CAUTION Sharp edges.
| CAUTION Do not immerse in water.
Please read all instructions carefully before use and retain for future reference.
INTENDED USE
Only operate the power tool/machine for its intended purpose and within the parameters specified in this manual. This power tool/machine is for domestic use only. This power tool/machine is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless supervised or given appropriate instruction concerning the product’s use by a person responsible for their safety.
GENERAL PRECAUTION
Do not allow to be used as a toy. Children should be supervised to ensure they
do not play with the power tool/machine. If the power tool/machine is not
functioning properly, has been dropped, damaged, left outdoors, or immersed in
liquid, do not use it, contact DOMU Brands Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing or
damaged. Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position
before connecting to the power source and/ or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch, or
energizing power tools that are switched on, invites accidents. Do not operate
power tools in explosive atmospheres such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks that may ignite dust or
fumes.
Always wear eye protection. Any power tool can throw foreign objects into your
eyes and cause permanent eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Everyday glasses have only
impact-resistant lenses.
Do not expose power tools to rain or wet conditions. Water entering the power
tools will increase the risk of electric shock.
Stay alert, watch what you are doing, and use common sense when operating a
power tool/machine. Do not use a power tool/machine while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating a power tool/machine may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust masks, non-skid safety shoes, hard hats, or hearing
protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to a power source and/or battery pack, picking up or
carrying the tool. Carrying a power tool/machine with your finger on the
switch or energizing a power tool/machine that has the switch on invites
accidents. Remove any adjusting key or spanner before turning the power
tool/machine on. A spanner or a key left attached to a rotating part of the
power tool/machine may result in personal injury. Do not overreach. Keep
proper footing and balance at all times. This enables better control of the
power tool/ machine in unexpected situations. Dress appropriately. Do not wear
loose clothing or jewelry. Keep your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used. The use
of dust collection can reduce dust-related hazards.
WORK AREA SAFETY
Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools/machines in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools/machines create sparks that may ignite dust or fumes. Keep children and bystanders away while operating a power tool/machine. Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE
Do not force the power tool/machine. Use the correct power tool/machine for
your application. The correct power tool/machine will do the job better and
safer at the rate for which it was designed.
Do not use the power tool/machine if the switch does not turn it on and off.
Any power tool/machine that cannot be controlled with the switch is dangerous
and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool/machine before making any adjustments, changing accessories, or
storing power tool/machine tools. Such preventive safety measures reduce the
risk of starting the power tool/machine accidentally.
Store idle power tool/machine out of the reach of children and do not allow
persons unfamiliar with the power tool/ machine or these instructions to
operate the power tool/ machine.
Power tools/machines are dangerous in the hands of untrained users.
Maintain power tools/machines. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power
tool/machines operation. If damaged, have the power tool/machines repaired
before use. Many accidents are caused by poorly maintained power
tools/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control. Use the power tool/machine accessories and
tool bits in accordance with these instructions, and take into account the
working conditions and the work to be performed.
Use of the power tool/machine for operations different from those intended
could result in a hazardous situation.
CLEANING & MAINTENANCE
Never soak or immerse electrical components or a component that has a plug
attached.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Ensure the motor has fully stopped before cleaning, clearing a blockage,
checking, or carrying out any maintenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired by a qualified repair
person before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Regularly check external nuts and fixings to ensure vibration caused by normal
use has not begun to loosen them. Store idle power tools out of reach of
children and do not allow persons unfamiliar with the power tool or these
instructions to operate the Breaker. Locate the power tool out of reach of
children, in a dry, locked unit.
Make sure that the cord is located so that it will not be stepped on, tripped
over, or otherwise subjected to damage or stress. Remove the plug from the
main socket/battery (where applicable) before carrying out any adjustment or
maintenance. Always store the power tool/machine in a dry place.
If the power cord is damaged, it must be replaced by a qualified service
technician. Keep the ventilation slots and motor housing as free of dirt and
dust as possible (where applicable).
Clean the power tool/machine by rubbing it with a clean cloth and blowing it
clean using low-pressure compressed air is recommended.
Ensure you have all the pieces listed. If you are missing any components,
contact our customer services department at
support@domu.co.uk. DO NOT proceed with assembly
if any components are missing.
Before starting the tool, make sure the tines are not touching any object and
are free to move.
Grip the Push Bar firmly with both hands. Never operate with one hand. Do not
overreach keep proper footing and balance at all times. Do not use the tool
on a slope that is too steep for safe operation. When on slopes, slow down and
ensure you have good footing.
Do not operate the tool whilst tired or under the influence of alcohol, drugs
or medication. Keep children, pets and bystanders away while operating the
tool. Distractions can cause accidents or injury.
Walk, never run with the tool.
Do not use the tool for extended periods of time. Use in short periods with
rest in between. The tool produces excessive vibration which can result in
loss of sense of touch, numbness, tingling, and reduced ability to grip. Long-
term exposure can lead to a chronic condition. If necessary, limit the length
of time exposed to vibration and use anti-vibration gloves.
CAUTION The tool may bounce upward and/or jump forward if the tines
strike extremely hard-packed soil, frozen grounds or buried obstacles such as
large stones, roots or stumps. If the tool strikes a foreign body, turn it off
immediately and check for the cause. Repair before restarting.
WARNING Do not operate the tool near underground electrical cables,
telephone lines, pipes or hoses. When charging accessories, always ensure the
machine is unplugged.
TECHNICAL SPECIFICATION
- Rated Voltage 230-240V
- Rated Power 1300W
- Rated Frequency 50Hz
DECLARATION OF CONFORMITY
DOMU Brands Ltd
5th Floor The Tower
Deva City Office Park
Manchester
M3 7BF
DOMU Brands Ltd
Unit 30, Finlan Road
Stakehill Industrial Estate
Middleton, Manchester
M24 2RW
Declare under our sole responsibility the product:
SKU
2500191
Description
Complies with the essential requirements of the following directives:
2006/42/EC
2014/30/EU
2011/65/EU/mit
2015/863/EU
And the Standards
EN 60335-1:2012+A11+A13, EN 62233:2008, EN 50636-2-92:2014, AfPS GS
2014:01
EN 55014-1:2017, EN 55014-2:2015, EN IEC 61000-3-2:2019, EN 61000-3-3:2013
Authorized Signatory on behalf of DOMU Brands Ltd.
COMPONENTS
- On/Off Trigger Box.
- On/Off Trigger
- Handle Bar.
- Cable Grip
- Central Support Bars x 2.
- Locking Nuts/Bolt x 4
- Lower Support Bars x 2.
- Height Adjustment Handle.
- Safety Flap.
- Grass Basket.
- Roller (pre-installed)
- Motor Unit.
- Cable Grips
COMPONENTS
ASSEMBLY
OPERATION
Depth Lever Position | Roller Depth |
---|---|
1 | -15mm |
2 | -11mm |
3 | -7mm |
4 | 1mm |
WORKING POSITION
Move horizontally on sloped areas. .
Move horizontally on sloped areas.
MAINTENANCE
DISPOSAL INFORMATION
Please recycle where facilities exist. Check with your local authority for
recycling advice.
CUSTOMER SERVICE
If you are having difficulty using this product and require support, please
contact support@domu.co.uk
WARRANTY
To register your product and find out if you qualify for a free extended
warranty please go to
www.vonhaus.com/warranty. Please retain a
proof of purchase receipt or statement as proof of the purchase date. The
warranty only applies if the product is used solely in the manner indicated in
the warnings page of this manual, and all other instructions have been
followed accurately. Any abuse of the product or the manner in which it is
used will invalidate the warranty. Returned goods will not be accepted unless
re-packaged in its original packaging and accompanied by a relevant and
completed returns form. This does not affect your statutory rights. No rights
are given under this warranty to a person acquiring the appliance second-hand
or for commercial or communal use.
COPYRIGHT
All material in this instruction manual is copyrighted by DOMU Brands. Any
unauthorized use may violate worldwide copyright, trademark, and other laws.
THANK YOU
Thank you for purchasing your product/appliance. Should you require further
assistance with your purchase, you can contact us at
support@domu.co.uk
VonHaus is a registered trademark of DOMU Brands Ltd.
Made in China for DOMU
Brands. M24 2RW.
Documents / Resources
|
VonHaus 2500191 1300W Lawn Moss
Rake
[pdf] Instruction Manual
2500191, 1300W Lawn Moss Rake, 2500191 1300W Lawn Moss Rake
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>