Minn Kota Adaptor Cable-Complete Features/User Manual
- June 5, 2024
- MINN KOTA
Table of Contents
Minn Kota Adaptor
Cable
Specifications
- DIMENSIONS : 3 x 5 x 11 inches
- WEIGHT : 1.4 ounces
- COLOR : Black
- MATERIAL : Synthetic
- MODEL : US2 Adapter Cable / MKR-US2-8 – HB 7-Pin
- BRAND: Minn Kota
Introduction
Minn Kota is one of the oldest and most well-known manufacturers of boat equipment since 1934. They manufacture excellent quality trolling motors, shallow water anchors, and other boat-related innovations. Minn Kota helps you with your journey on the water.
The Minn Kota Universal Sonar 2 has the ability to deliver advanced water temperature sensing. It also provides Dual Beam Plus technology which allows you to have the best view of the waters below. Minn Kota provides an adapter to connect the Humminbird fishfinder with a Universal Sonar 2 transducer. The Humminbird fish finder is one of the well-known fish finders in the market. It uses a beam like a sonar to detect fishes inside the water and carry out other measurements like water depth, etc. The adapter is used to make the connection of the Hummin fish finder and the Universal Sonar 2 present of the trolling motor. The adapter is shielded and features IP68-rated waterproof connectors. They are metal-tipped in order to prevent sonar interference. The length of the cable is about 16 inches. It is compatible with 200kHz/83kHz and provides traditional 2D Sonar.
MKR-US2-8 UNIVERSAL SONAR 2 ADAPTER CABLE
How to connect the adapter?
To Connect:
- Align pins and key
- Thread cable collar together
- Tighten until snug
FOR THE MOST CURRENT FISHFINDER COMPATIBILITY INFORMATION, PLEASE VISIT OUR WEBSITE: WWW.MINNKOTAMOTORS.COM/US2
FREQUENTLY ASKED QUESTION
-
Will this work to connect MINN KOTA TERROVA to my LOWRANCE ELITE 7HDI?
If the Lowrance Elite features the same pins then it will work to connect it to MINN Kota Terrova. -
I have an Ultrex motor will this work on my hook9?
No, it will not work to connect the hook 9 to Ultrex motor, as the pins are different -
What is the length of the cable?
The length of the cable is 16 inches -
How many pins is this connector?
The connector has a total of 6 pins. -
Does it work with LOWERANCE ELITE 5TI?
Yes, it works with elite 5. -
Will this connector work with the Lowrance Hook 4X?
Yes, it is expected work with Lowrance Hook 4x. -
Do I still need to hook up a power cable to the fish finder separately? or do these US2 cables also supply power?
The US2 cables don’t supply power and require a separate source for the supply of power. -
Will this connect from my Ultrex to my Lowrance HDS 1?
Yes, it can connect the Ultrex to the Lowrance HDS 1. -
Will this work with a Lowrance Elite-7 Chirp?
Yes, this will work with the Lowrance Elite 7 Chirp. -
Will this work with LOWRANCE HDS 7?
Yes, the Minn Kota adapter cable can work with any HDS unit. -
Will this work on a Helix 8?
Yes, it is expected to work on a Helix 8. -
Is the US2 connector end 5 pin?
No, the US2 connecter end is 6 pin.