chicco Close yoYou 3 in 1 Bedside Bassinet Owner’s Manual

chicco Close yoYou 3 in 1 Bedside Bassinet

WARNING
Failure to follow these warnings and the instructions could result in serious injury or death. For your child’s safety, read the labels and owner’s manual before using the product.

• PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFETY OF YOUR CHILD.
• ALWAYS PROVIDE THE SUPERVISION NECESSARY FOR THE CONTINUED SAFETY OF YOUR CHILD.
• SUFFOCATION HAZARD – Infants have suffocated:
• In gaps between extra padding and side of the bassinet, and
• On soft bedding.
• Use ONLY the pad provided by Chicco. Never add a pillow, comforter, or another mattress for padding.
• If a sheet is used with the pad, use only a fitted sheet specifically designed to fit snug with at least 2” (5cm) under all sides of the pad.
• Strings and cords can cause strangulation! DO NOT place items with a string around child’s neck such as hood strings, pacifier cords,etc.
• DO NOT suspend strings over the product or attach strings to toys.
• DO NOT place the product near a window where cords from blinds or drapes can strangle a child.
• FALL HAZARD – To help prevent falls, do not use the bassinet when the infant begins to push up on hands and knees or has reached 20lbs (9kg), whichever comes first.
• ALWAYS engage the brake before placing child in the product.
• DO NOT use this product to transport child from room to room.
• DO NOT carry bassinet with child in it.
• Be sure both sides are locked in position whenever child is in product.
• Before use, remove and dispose of all plastic bags and packaging materials and keep them out of reach of children.
• Do not use accessories, spare parts, or any component not supplied or approved by Chicco as they may make the product unsafe.
• Keep product away from stoves, heaters, fireplaces and other hazards which can cause injury to your child.
• To reduce the risk of SIDS (Sudden Infant Death Syndrome), pediatricians recommend healthy infants be placed on their back to sleep unless otherwise advised by your physician.
• DO NOT place more than one child in bassinet.
• Never use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check periodically during use. Contact Chicco for replacement parts and instruction if needed. ver substitute parts.

Parts List

1. A. – Base
2. B. – Front Legs (long)
3. C. – Rear Legs (short)
4. D. – Base Cover
5. E. – Bassinet Support
6. F. – Bassinet
7. G. – Mattress

WARNING
Before use, remove and dispose of any plastic bags and keep them out of reach of children to avoid the danger of suffocation. Failure to follow these warnings and instructions could result in serious injury or death.
This product requires adult assembly. Make sure all latches are locked and secure before use.

How to Assemble the Bedside Bassinet

Attach a Front Leg (long) (B)to base as shown, then attach other Front Leg. Pull on both Front Legs to make sure they are secure.

Note: Each leg will only fit to the correct attachment post.

1B. Attach a Rear Leg (short) (C ) to base as shown, then attach other Rear Leg. Pull on both Rear Legs to make sure they are secure.

Line up the tab on the base to the cutout on the Base Cover. Slide the Base Cover onto the Base. Make sure that the Chicco logo is on the same side as the Front Legs (Long), as shown. Push down on the Base Cover until it clicks into place.

Locate the three openings on bottom of the Bassinet and the 3 metal pins on top of the Base. Make sure that the openings a, b, c and pins 1, 2, 3 are going in the correct direction, as shown.

IMPORTANT: Make sure brake handle is up (brake on) before attempting to connect to the base.

Locate the three openings on bottom of the Bassinet and the 3 metal pins on top of the Base. Make sure that the openings a, b, c and pins 1, 2, 3 are going in the correct direction, as shown.

IMPORTANT: Make sure brake handle is up (brake on) before attempting to connect to the base.

Place the Bassinet onto the Base. Make sure to line up the Bassinet to the Bassinet Support and the three metal pins on the Base.

Lock the Bassinet onto the Base. Turn the four (4) locks on the bottom of the Bassinet in the direction of the arrow until they click into place and cover the end of the Bassinet Support. Check that Bassinet is secured to the Base.

WARNING
FALL HAZARD – To help prevent falls, stop using the bassinet when infant begins to push up on hands and knees or weighs over 20lbs. (9kg), whichever comes first.

Insert the mattress into the Bassinet, as shown. Make sure the fabric flaps are tucked flat under the Mattress before use. Check that the mattress is flat after inserting.

Using the Bedside Bassinet

To raise the Bassinet, pull up on the Bassinet, as shown. After reach-ing desired height, push down on the Bassinet to make sure it is secure. To lower the Bassinet, locate both levers on the back of the Bassinet. Squeeze on the levers and lower the Bassinet down to desired height. Release both levers to lock the Bassinet into position. Push on the Bassinet to make sure it is secure.

To move the Bassinet, unlock the brake. Rotate the handle down, as shown until the UNLOCKED image is fully visible. When the brake is unlocked push or pull the Bassinet to the desired location. Rotate the handle up to engage the brake.

Bedside Bassinet Mode

Bassinet Mode

WARNING
DO NOT use this product to transport child from room to room.

To use in the Bassinet Mode. Move the Bassinet to your preferred location and engage the brake. Adjust the Bassinet to the desired height.

Changing Table Warnings

WARNING

• STAY within arm’s reach of your child.
• ALWAYS lock the brake before using the changing table. See Step 10

Unlock both top rail latches. Squeeze both latch buttons and push down to lower the top rail, as shown in 13B.

Flip over the Mattress and re-insert it into the bottom of the Bassinet.

Flip up all 4 flaps to create an area to change your child. Then adjust to your desired height (refer to Step 9). Make sure the locking handle is rotated up, to engage the brake. To move the Changing Table, refer to Step 10.

Softgoods Removal

To remove the fabric, make sure the side rails are raised. On one end, pull out the fabric tab tucked into the Bassinet base. Repeat for the other side. 16B.Undo all 4 zippers, 2 on each side, as shown.

Softgoods Removal

Guide the fabric up and around the latch button area. Repeat for the other end and remove the fabric from the Bassinet frame.

Mattress cover can be washed, by removing the pad from the mat-tress cover. Undo the zipper and pull out the Mattress Pad. Reverse this step to insert the Mattress Pad into the mattress cover.

Cleaning and Maintenance

This product requires regular maintenance. The cleaning and maintenance of the Bassinet must only be carried out by an adult.

CLEANING
Fabric parts of the product may be machine washed separately in cold water and mild soap on delicate cycle. No bleach. Drip dry. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the bassinet has come into contact with water.

MAINTENANCE
Periodically check the bassinet for loose screws, worn parts, torn material or stitching. Replace or repair the parts as needed. Use only Chicco replacement parts. Keep the bassinet in a dry place. If bassinet becomes wet open bassinet and allow to dry completely. Prolonged exposure to direct sunlight may cause the fabric to fade and plastic parts to warp.

For More Information
If you have any questions or comments about this product, or are missing any of the parts please do not return this product to the store. Contact us in one of the following ways: info.usa@artsana.com
www.chiccousa.com 1826 William Penn Way Lancaster, PA 17601

References

• Chicco Baby Products | Car Seats, Strollers, Highchairs & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>