PHILIPS Hue Smart Button Bridge Instructions

PHILIPS Hue Smart Button Bridge

Connect your Inner Smart Button to Philips Hue

Step 1:
Connect the Smart Button to the Philips Hue Bridge

• Open the Philps Hue app and start searching for lights.
• Remove the plastic tab to put the Remote Control in pairing mode. The LED on the front will start blinking once per second.
• The LED will rapidly blink twice to confirm it’s successfully connected.
  NOTE:
  the Smart Button will not appear in the Philips Hue app.No blinking LED? Press and hold the reset button behind the battery lid for 3 seconds.

Step 2:
Connect the Smart Button to the individual lights

• Turn the light off for at least5 seconds using the wall switch and turn it on again.
• The light is in pairing mode for 1 minute from now.
• Press the Smart Button 3 times in quick succession and hold the third press for 3 seconds.
• The LED on the Smart Button will blink once per second.
• Bring the Smart Button close to the light (< 10cm).
• The light will blink to confirm it’s successfully connected.

Repeat Step 2 for all lights that you want to connect to the Smart Button.Successful!You can now control the connected light(s) from the app and with the Smart Button.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>