INVENTUM STK01W Washing Machine and Dryer Stack Kit Instruction Manual
- June 6, 2024
- INVENTUM
Table of Contents
INVENTUM STK01W Washing Machine and Dryer Stack Kit
INSTALLATION INSTRUCTION
-
Make sure that the power supply is disconnected before installation!
-
Torque should not exceed 5 N.m
-
Clean the top cover of washer
-
Please note, remove the backing of the stickers
Note: Align the bracket B and the washing machine before sticking the bracket B with the stickers on the bottom of the bracket -
If the dryer base is not metal, adjust the adjusting feet of the dryer to the lowest position directly
If the dryer base is metal:
- Unscrew the front two adjustment feet of the dryer downwards
- Insert two fixing parts D
- Tighten the two adjustment feet upwards
Place the dryer at the back of the top of the washer and then push the dryer forward until the hole matches the hole
- If the dryer base is not metal, tighten the front and rear four screws G.
- If the dryer base is metal, only tighten the front two screws A.
Product Information
Specifications
- Manufacturer: Inventum
- Model: STK01W
- Compatible with: Washing machines and dryers
- Torque Limit: 5 Nm
- Material : Metal
Frequently Asked Questions (FAQ)
Q: Can this stack kit be used with any brand of washing machine and dryer?
A: The stacking kit is designed to be compatible with most standard washing
machines and dryers. However, it is recommended to check compatibility with
your specific models before installation.
Q: How often should I check the tightness of the screws?
A: It is advisable to check the tightness of the screws periodically,
especially after initial installation and then as part of regular maintenance,
to ensure the stability and safety of the stacked appliances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>