Rawlplug DF269A0B Sanitary Fixing Kit Basin Fixing Installation Guide
- June 24, 2024
- RAWLPLUG
Table of Contents
Rawlplug DF269A0B Sanitary Fixing Kit Basin Fixing
Specifications
- Basin : 1 piece
- Bolt : 4 pieces
- Nut: 4 pieces
- Metal Washer: 4 pieces
- Expansion Screw Plastic : 4 pieces
Product Usage Instructions
Components Assembly
- Place the Basin on a flat surface.
- Attach the Bolts and Nuts to the Basin using the Metal Washers.
- Secure the Basin by using the Expansion Screw Plastics.
Installation
- Before fixing the Basin in place, ensure that it is sitting level.
- Add bolts to the plasterboard for additional support.
Mounting
- Add battens to the wall before installation to provide stability.
- Secure the Basin (side) using the Expansion Screw Plastics, Bolts, Metal Washers, and Nuts.
FAQ
- Q: How do I ensure the Basin is level before installation?
- A: Use a spirit level to check if the Basin is sitting evenly on a flat surface.
- Q: Can I use additional bolts for mounting on a different surface?
- A: Yes, you can add bolts to a plasterboard for secure mounting.
Components
INSTALLATION INSTRUCTION
- Note: Product can be mounted on both concrete or timber-framed walls
- Important! Before installing, ensure there is sufficient timber framing in the wall to securely fasten your basin to.
- Before fixing the basin in place, ensure that the basin is sitting level.
- Screw a metal nut onto each fixing bolt to secure the basin.
Caution: do not over-tighten as this may damage the basin/top.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>