RONIS Tronic Pro Professional Alone Electronic Lock Instructions

Tronic Pro Instructions

SAFETY

Keep the manual accessible

These instructions form an integral part of the furniture lock.

• Keep these instructions with the furniture lock.
• Ensure that the instructions are available for the assembly fitter/operator.
• Please include these instructions if you sell the furniture lock or pass it on.

Important safety information

The furniture lock is built in accordance with recognised safety regulations. When working with and on the furniture lock, however, residual risks that can cause danger to life and limb remain. The following safety notices must therefore be observed and followed.

Avoid risk of explosion
The furniture lock is not suitable for use in areas where there is a risk of explosion. Assembling and operating the furniture lock in an area where there is a risk of explosion can lead to serious injury or death.

• Only assemble and operate the locks in areas where there is no explosive atmosphere.

Choking risk
Children can become injured after swallowing small parts.

• Make sure that small parts e.g. locking media or screws are kept out of the reach of children.

Avoid property damage and malfunction
Property damage can occur as a result of incorrect storage for an extended period of time.

• Store the furniture lock and its components in the original packaging in a dry and dust-free place.

Property damage can occur as a result of the furniture lock being assembled and operated incorrectly.

• Read these instructions carefully before assembling the furniture lock and putting it into operation.
• Follow the instructions step by step.
• Never touch the furniture lock’s electronic components.
• Protect the parts of the furniture lock against moisture.
• Handle the furniture lock carefully to prevent scratches.
• Secure the screws using the specified torque.

Risk of property damage as a result of incorrect cleaning and maintenance.

• Do not lubricate any parts of the furniture lock.
• Clean the housings and closing devices with a soft, damp cloth; do not use any cleaning agents.

Appropriate user training

• People working on and with the furniture lock must have basic manual skills so that they can safely make screw connections and drill holes if necessary.
• Installers of the furniture lock must understand how it works and how the individual components interact.

INSTRUCTIONS

Multiuser mode

TO CLOSE:

TO OPEN:

Open and close with 4-digit code. The code is erased every time the lock is opened, making it available for a new use.

Single User mode

TO OPEN:

TO CLOSE: The latch closes automatically after 2 seconds.
Note: the lock is provided with a metal latch holder that enables the user to close the door by pushing it. (Door slam function)

Change the User code

PRESS FOR 3 SECONDS

1. Press Enter for 3 seconds.
2. Input Current code and press enter.
3. Input New code and press enter.

Open using Master code: Inspection mode/Delete User code

-30S INSPECTION MODE
+30S USER ERASED

INSPECTION MODE
Input the 5 digit Master code and press enter. Close the lock by pressing enter within 30s. The User code is not deleted.

DELETE USER MODE
Input Master code and press enter. After 30s the lock stays open. The User code has been deleted and a new User code will be required to close the lock again.

INSTRUCTIONS

Change the Master code

1. Press Enter for 3 seconds.
2. Input Current master code and press Enter.
3. Inpute New master code and press Enter.

Open using electronic Master Key

INSPECTION MODE
1. Connect the Master key (BLUE)
2. Lock opens
3. Remove electronic key
4. Press enter within 30 seconds
5. User code is not deleted| DELETE USER CODE
1. Connect the Master key (BLUE)
2. Lock opens
3. Remove electronic key
4. After 30 seconds the User code will be deleted
5. A new User code will be required to close the lock again.
---|---

Programmable settings (management software and cable required)

AUTOMATIC OPENING TIME:
The lock will open automatically at the programmed time:

• hh : mm
• Mon, Tue, Wed, Thu, Fri, Sat, Sun
• Working days Two options:
  1. Leave door open
  2. Close door again

ACOUSTIC SIGNAL VOLUME:

• High/Low/Off

LED INDICATION OF CLOSED POSITION:

• On/Off blinking red LED when locker is closed

CODES:

• User / Master

LAST EVENTS BATTERY LEVEL NUMBER OF OPERATIONS

Settings key

1. Load settings from the computer to the settings key (BLACK).
2. Connect settings key to the lock.
3. The settings will be automatically transferred to the lock.

Battery replacement

1. Unscrew the T20 Torx security
IMPORTANT:
2. The battery replacement must be completed in less than 5 minutes. The battery pack must remain connected during battery removal or the programmed time will be lost.

Measurements

WARRANTY AND WARNINGS

Warranty and liability

Our General Terms and Conditions apply. We do not accept liability for personal injury or property damage resulting from one or more of the following:

• Improper use of the furniture lock
• Failure to observe the notices in these instructions
• Incorrect assembly I
• ncorrect product repairs
• Disasters caused by external influences and force majeure.

Copyright

This documentation may not be reproduced either in whole or in part, stored or transmitted, disclosed or translated in any form or by any means without the prior written consent of DOM Security.
This documentation is updated at regular intervals. The publisher is always grateful to receive information about any errors or suggestions regarding this documentation.
© DOM Security, 20, rue de l’Arc de Triomphe, 75017 Paris, France

Documentation Officer
DOM Security Product Management Department 20, rue de l’Arc de Triomphe 75017 Paris, France

Information available online
You can download these instructions and other information about the Tronic family on the product details page at the following web address: www.dom- security.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>