cellularline C4220FS Full HD LED TV Built-in DVD Player Instructions
- June 14, 2024
- cellularline
Table of Contents
cellularline C4220FS Full HD LED TV Built-in DVD Player
Product Information
Specifications
- Model: C4220FS
- Region Code: 2 (Europe)
Product Usage Instructions
Factory Reset
To resolve many issues, you can perform a full factory reset of the TV. Follow
these steps:
- Press the source button.
- Enter the sequence: 2, 5, 8, 0 (quickly).
- Select “Settings” and press OK.
- Scroll down to “Shipping” and press OK.
- The TV will turn off and back on. Afterward, please retune your TV.
Troubleshooting TV Signal
If your TV is not receiving a signal, follow these steps:
- Press SOURCE.
- Make sure “Satellite” is highlighted on the list.
- Press MENU – AUTO TUNE.
- Ensure that “Astra 2E, 2F and 2G” is displayed at the top.
- Click on “Search” at the bottom to scan for channels.
- If you are still experiencing issues, contact our UK sales team on 0333 433 0312 for further assistance.
Troubleshooting Satellite TV Channels
If you cannot find any channels on satellite TV, follow these steps:
- Check that the Satellite dish/LNB setup and all cables are correctly connected.
- Ensure that the dish is not obstructed by trees, tall buildings, or other objects.
- Make sure your location is within the footprint of the desired satellite transponder.
Optimizing TV Signal
To get the best TV signal, follow these recommendations:
- Cello Electronics recommends using an outdoor aerial suitable for receiving digital television transmissions.
- Avoid using indoor or portable aerials as they may result in a loss of full digital service due to impaired signal quality.
- If you are unsure, it is advisable to consult a professional aerial installer.
Enabling Subtitles
To enable subtitles, press the subtitle button located under the BLUE button
on your remote control.
Troubleshooting DVD Player
If the DVD player is not reading discs, follow these steps:
- When inserting DVDs, ensure that the label side is facing the back of the TV.
- European DVDs should have Region code 2. Discs with other region codes will not work.
- If multiple discs fail to load or work correctly, please call our UK sales team on 0333 433 0312 for further assistance.
FAQs
-
Q: Why is my TV getting no signal?
A: To search for channels, press SOURCE and make sure “Satellite” is highlighted. Then, go to MENU – AUTO TUNE and ensure “Astra 2E, 2F and 2G” is displayed at the top. Click on “Search” to scan for channels. If you are still having issues, please contact our UK sales team on 0333 433 0312. -
Q: Why can I not find any channels on satellite TV?
A: Please check that the Satellite dish/LNB setup and all cables are connected correctly. Ensure that the dish is not pointing at any obstructions such as trees or tall buildings. Additionally, make sure your location is within the footprint of the desired satellite transponder. -
Q: How do I get the best TV signal?
A: Cello Electronics recommends using an outdoor aerial suitable for receiving digital television transmissions. Avoid using indoor or portable aerials as they may result in a loss of full digital service due to impaired signal quality. If you are unsure, it is advisable to consult a professional aerial installer. -
Q: How do I turn on subtitles?
A: To enable subtitles, press the subtitle button located under the BLUE button on your remote control. -
Q: Why is the DVD player not reading discs?
A: When inserting DVDs, make sure the label side is facing the back of the TV. European DVDs should have Region code 2. Discs with other region codes will not work. If none of the discs load or work correctly, please call our UK sales team on 0333 433 0312 for further assistance.
C4220FS
For any problems not mentioned in this guide or for further support please
contact our UK sales team on 0333 433 0312 or email
[email protected]
Factory Reset
To resolve many issues you can do a full factory reset of the TV. To do this press the source button and numbers 2,5,8,0 in a fast sequence. This will bring up factory settings, choose settings and press OK. Go down to shipping and press ok again. The TV will turn off and back on, from here please retune your TV.
Why is my TV getting no signal?
To search for channels please - Press SOURCE, make sure that Satellite is highlighted on the list. Press MENU - AUTO TUNE - Make sure it says Astra 2E, 2F and 2G at the top. Click on search at the bottom and TV will scan for channels. If you are still having issues please contact our UK sales team on 0333 433 0312.
Why can I not find any channels on satellite TV?
Check that the Satellite dish/LNB setup and all cables are connected correctly. Make sure the dish is not pointing at any obstructions i.e. trees, tall buildings etc. Ensure your location is within the footprint of the desired satellite transponder.
How do I get the best TV signal?
To view channels correctly, a signal must be received by the set from one of the following sources: • An outdoor aerial (May need to check the digital service in your region.) • A cable television network. Cello Electronics recommend the use of an outdoor Aerial suitable for receiving digital television transmissions. The use of an indoor or portable aerial is most likely to result in loss of full digital service as the quality of the digital signal may be impaired. It is advisable to consult a professional aerial installer if in doubt.
How do I turn on subtitles?
To enable subtitles, please press the subtitle button which is under the BLUE button on your remote control.
Why is the DVD player not reading discs?
When inserting DVD’s make sure the label side is facing to the back of the TV. The DVD Region code for Europe is Region code 2. Discs with other region codes will not work. Try more than one disc, if none of them load or work correctly please call our UK sales team on 0333 433 0312.