SoundPEATS SPE-0016 Portable Wireless Speaker User Manual

SoundPEATS SPE-0016 Portable Wireless Speaker User Manual

Product Diagram

Pairing

1. Long press the MFB for 1.5s to turn on, the Indicator starts to ffash blue for 1 s, then Bluetooth speaker enters pairing mode, the indicator flashes in blue and green alternately.
2.  Activate Bluetooth on the device, and choose “SOUNDPEATS Halo” on Bluetooth list to pair.

Reset

1. Please plug the Type-C charging cable Into the speaker. and make sure they  are In charging status.
2. Under the power-on status, long press the Bluetooth button for lOs until the indicator flashes in green twice, reset complete.

Enter/Exit stereo Mode

1. Enter stereo Mode

Under the power-on state, long press the Bluetooth button for 3s, the speoker nters stereo mode. The lndlcotor flashes blue quickly, and then It enters pairing mode and lasts for 3 minutes.

1. Enter stereo Mode

Under the power-on state, long press the Bluetooth button for 3s, the speoker enters stereo mode. The lndlcotor flashes blue quickly, and then It enters pairing mode and lasts for 3 minutes.

Note:

Under the power-on state, the speaker pairs to the phone at first is the main unit. In stereo mode, only the main speaker can hold the call,

2. Exit stereo Mode

Long press the Bluetooth button for 3s again to exit the stereo mode, It only works on the speaker being operated, then the speaker will return to polrlng mode after exiting stereo mode.

Note:

After exiting stereo mode, only the main speaker con connect with the phone.

Button Control

Charge

1. Use a Type-C adapter to charge the speaker ( current less than 1 A) flashes slowly in red while charging and goes off when fully charged.
2. Please charge the speaker at least once per 3 months when not in use for a longtime.

Q&A

Ql: How to enter stereo mode?

The stereo mode requires 2 speakers to be used simultaneously. We recommend you to buy 2 speakers to have better music experience

Q2: How long can the speaker play with a single charge?

The speakers can work continuously for 8 hours with a single charge. If you don’t use the speaker for a long time. please turn It off or deactivate your phone Bluetooth. the speaker will power off
automatically after 3 minutes.

Q3: Why two speakers can not enter stereo paring?

Pis confirm that two speakers have connected with mobile successfully. If yes. pis clear the paring record of speakers from the mobile and make sure two speakers paired with each other, the LED of main speaker
flashes blue and green, the second speaker’s L£D stays green. After that, activate Bluetooth on the mobile, and choose “SOUNDPEATS Halo” on Bluetooth list to pair.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>