COSTCO Bigboi Blowr Buddi Touchless Car and Motorcycle Dryer Instruction Manual
- June 5, 2024
- Costco
Table of Contents
COSTCO Bigboi Blowr Buddi Touchless Car and Motorcycle Dryer
STRUCTURE REPRESENTATION
NO.
| Name|
Amount
---|---|---
1
| Air outlet|
1
2
| Components fo the heat-insulating cover|
1
3
| Retractable hose|
1
4
| Front cover componnt|
1
5
| Electric heating component|
1
6
| Heat and radiation shield|
1
7
| Motor stand|
1
8
| Electric fun|
1
9
| Anli-vibrafon pad for motors|
1
10
| Case component|
1
11
| Inner noise eliminaUo cover|
1
12
| Filter|
1
13
| Trail cover|
1
14
| Outcr noise dimination cover|
1
15
| Screw nut. for trai1 cover|
1
16
| Power s¼ilch signal|
1
17
| Power switch|
1
18
| Vdodty adjustmnt knob|
1
19
| Heating switch|
1
20
| Heating signal|
1
PRODUCT FEATURES
See the label of the machine.
FUNCTIONS & FEATURES
Soft Start
Thanks to the protection from ,current buffers, when the dryer starts1 the
dryers will not discharge any impulse current, exerting no adverse influence
upon the neighboring working electrical equipment.
Law Noise and Powerful Airflow
The specially-designed noise reduction system will deliver 10%-greater
airflow than any other single~motor dryers, with over 1.2HP (l000watts) this
model can dry your car, motorcycles, boat or ski faster in a less noise
environment which will benefit the operator.
Full Function
This model is especially designed w·th high speed setting, which can work at
full speed, as well as minimum airflow and high-heat settings, allowing
precision drying and accurate wind speed when needed ..
BBT (Bigboi Tempeiature Technology)
2 Stage adjus able warm filtered air fixed at 25c higher than the surrounding
environment. All this available at a touch of your fingertips.
Adjustable wind control
The toggole switch above the handle is the wind control switch. This wiill
allow the user to adjust the wind speed from 70kmh to 220kmh.
Accessories
Visit your supporting countries distributor websirte to see how you can
make your blower even more awesome with accessories.
INSTR.UCTIONS FOR USE:
Thank you for purchasing the Bigboi Buddi. Before you start enjoying the features and benefits of touchless drying please take a minute to read the below and familiariz,es yourself with the dryer.
INTHE BOX
- Bigboi Blower Buddi
- 1 replacement filter
- 3 hose nozzles
Open the dryer box, take out the dryer, and check its appearance, if there is no damage; go on with following steps:
- Place or fix the dryer, connecting the desired nozzle with an screwing motion, fastening the nozzle to the unit.
- Plug in the dryer (please make sure the power supply voltage in your country matches the machine);
- Switch on the dryer and adjust it to your desired wind speed. Then the dryer can begin the drying process.
IMPORTANT NOTICE
-
This machine use AC power source, power must have good grounding before used.
-
To maintain a smooth flow of air, please keep a safe distance from the surface. This will allow the warm filtered air to travel smoothly over a larger surface making the drying more efficient and preventing
Taking in water which may damage the machine. -
Clean the filter regularly to ensure a smooth air flow.
-
Do not let minors close or play with the machine!
MAINTENANCE INSTRUCTION
- The shell of the machine can be cleaned with a soft cloth and neutral detergent sof ution (to avoid spoif ing the paint work) then use a dry cloth to clean it;
- Use water or strong fan to clean the filters regularly. Note that filters cannot be fixed on the machine until it is totally dry, in case the water may damage the machine. The machine has a standby filter packaged with it.
- When the machine runs out of carbon brush, please contact a professional to check and update the required parts.
For further information on any Bigboi products, please contactinfo@bigboi.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>