KOLEGEND B086SPJ7P9 3 In 1 Remote Control Excavator with Grab Drill Metal Shovel User Manual
- June 5, 2024
- KOLEGEND
Table of Contents
KOLEGEND B086SPJ7P9 3 In 1 Remote Control Excavator with Grab Drill Metal
Shovel
Thank you for purchasing the kolegend Construction Toys. Customer satisfaction is our aim. This manual contains the instructions you will need to operate and warranty your model so that you can enjoy it for years to come. However, please be advised that this model is a hobby-grade Construction Toys that will require maintenance and replacing parts. Rest assured that kolegend is a team of professionals who aim to provide the highest level of factory support possible.
Use Instructions
- Please charge the batteries via the provided USB charging cord when received the toy.
- Unscrew and take of the panel on the bottom of the toy, put rechargeable battery in and ft the panel back. Put two 1 .5V AA batteries ( not included) into the remote.
- Tum on switch of the toy (at the bottom of the rear) and remote. They will pair automatically.
Frequency Pairing:
- This product uses 2.4GHz frequency remote control, before the play, should be on the remote control and the vehicle frequency matching;
- Excavator and remote control after installing the battery power is turned on
- At this point the remote control will automatically find the frequency, light is blinking.
- When the remote control light stops flashing.
- Frequency matching is completed, the remote control function can be used normally.
Battery Instructions
- Charging time : 2-3 hours. (Note:You need to activate the battery before first use, please charge it for 8 hours)
- When charging, LED light will flash slowly, and will turn off after full charge.
- Please use only the provided charging cord to charge the battery.
The status of the USB indicator light when charging:
- The LED light is always on when connected;
- The LED light flashes slowly when charging;
- The LED light is off when fully charged;
Charging time: 3-4 hours
When the battery is fully charged, please unplug the USB charging cable in time.
INDICATOR LIGHT STATUS AT THE TIME OF CHARGING:
- Uncharged state: red light always lit
- Charged state: Red light always lit + Green light flashes
- Full charging state: Red and green light always lit
- Charging period: 4-5 hours
When battery is charged, please pull off the USB charger lead in time.
Precautions
-
Choking Warning
This product includes small parts, not for children under 3 years old. -
Supervision Required
Children aged 8 or below should be under the supervision of parents or guardian. -
Product Safety and Maintenance
-
Please check the product and accessories came in the package. If there are any defects or missing parts, please contact Customer Support soon at email
kolegend-US@outlook.com -
The rechargeable battery packs need to be charged before first use. Please make sure input is no more than 5V.
-
A full charge usually takes about 2 hours. Exception: It need to be charged for 8 hours before first-time use.
-
Please make sure the switch of the product/ controller is set to OFF before installing batteries.
-
Pay attention to the polarity marks in the battery compartments of the controller when install batteries.
-
If the rechargeable battery power is exhausted, please take it out and connect to provided USB cord to recharge.
-
Do not charge the rechargeable batteries by chargers other than the provided USB cord.
-
Do not use larger/more powerful batteries in this product, which will damage the circuit board.
-
Troubleshooting
| Problem | Solution |
|---|---|
| How to know remote and toy connected? | 1. The LED light on the remote flashes |
red, which means it’s trying to connect with toy.
2. Few seconds later, LED turns off, which means they are connected.
The led light on the remote keeps flashing and toy does not respond.| 1. The remote did not connect with the toy, which is usually caused by low battery.
2. Turn off switches of both toy and remote.
3. Recharge the batteries and turn on both toy and remote.
The Remote does not respond. The battery is fully charged and AA batteries for the remote are new.
| ****
1. The remote is in sleep mode and cannot pair with the toy.
2. Turn off both toy and remote and then turn them on again to remake a pairing. (Maybe the remote control is damaged, please contact customer service for help)
The arm does not go up and down, while ohter functions are normal.| The gears
get stuck/wear out. Please contact our customer service to solve it.
The toy wheels or tracks do not work| Maybe the wheels or tracks get
stuck/wear out. Please contact our customer service to solve it. They will
provide you with professional help.
Customer Service
After receiving the product, if you are not satisfied or have a problem with
the order or product, please don’t worry or decide to return toys easily.
Please contact our customer service for help. Send us the order number, fault
picture or video. After receiving your question, we will provide you with
professional help.
Email: kolegend-US@outlook.com
Warranty
To make sure you don’t invalidate the terms of the warranty, please read and
this booklet.
If a defect in materials, workmanship and assembly is found BEFORE the product
has been used, we will exchage the entire product, if the product is returned
complete and in perfect condition in its original packaging.*
Warranty is only valid if the items were purchased directly from kolegend
stores on Amazon. Purchases from Amazon Services LLC., Amazon warehouse or out
of Amazon will not be covered by the warranty.
Covered by Warranty
- 6 months warranty for the Motor (excludes damages caused by the user, including but not limited to incorrect maintenance).
- 6 months warranty for the remote controller (excludes damages caused by the user, including but not limited to incorrect operation or maintenance).
- 3 months warranty for the gear connect and fix the arm and bucket. (exdudes damages caused by the user, including but not limited to operation or maintenance).
- 3 months warranty for the tire or track of toys. (exdudes damages caused by the user, including but not limited to operation or maintenance).
- 1 month warranty for the rechargeable batteries and charging cord (excludes damages caused by the user, including but not limited to incorrect charging or maintenance).
Not Covered by Warranty
- All other parts not mentioned above.
- Component failure or premature wear as a result of crash damage.
- Gear wear as a result of manually operating the arm.
- Water damage or problems resulting from water intake.
*In many cases, it is faster and more cost-effective for the user to fit replacement parts to the product, so we maintain the right to request this of the user.
If you need replacement parts covered by the warranty or any questions about
this product, please contact Customer Support at Email kolegend-
US@outlook.com
Thank you again for choosing kolegend. We work hard every day to assure you
receive the highest level of customer satisfaction possible. We truly want you
to enjoy your new mode!
Kolegend Model
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>