Lorelli ADVENTURE 76-150CM Car Seat Adventure Instruction Manual

Lorelli ADVENTURE 76-150CM Car Seat Adventure

Scan the QR code to get more product infom1ation and manual instruction in more languages. Download QR Scanner App onto your device.

The instructions for use must be kept for the entire life of the universal child restraint system!

1. This is a Universal enhanced child restraint system (height range: 76-105 cm / maximum occupant weight: 18 kg). It is approved under UN Regulation No. 129 for use mainly in “Universal seating positions” as specified by vehicle manufacturers in the vehicle user manual. In case of doubt, consult the manufacturer of the enhanced child restraint system or the dealer.
   This is an enhanced child restraint system i-Size booster seat (100-150 cm). It is approved under UN Regulation No. 129 for use mainly in “i-Size seating positions” as specified by the vehicle manufacturers in the vehicle user manual. In case of doubt, consult the manufacturer of the enhanced child restraint system or the dealer.

2. In terms of installation, the system can be expected to comply if the manufacturer has stated in the vehicle’s owner’s manual that ii is suitable for installation of an i-Size child restraint system of this age group.

3. This child restraint system is classified as “i-Size” under conditions more stringent than those applied to previous models not accompanied by this note.

4. This car seat is approved for use with the following types of installation methods: FORWARD-FACING INSTALLATION: ECE R129/03 Universal seat belt ECRS, forward facing from 76-105 cm and occupant weight S 18 kg,withadultsafetybelt;
   FORWARD-FACING INSTALLATION: ECE R129/03 ECRS i-Size forward-facing child booster seatfrom 100-150 cm, with adult safety belt.

Important safety instructions

ATTENTION

1. The hard items and plastic parts of the enhanced child restraint system must be placed and installed so that, when the motor vehicle is in normal operation, they cannot be trapped by a sliding seat or vehicle door.
2. All belts that secure the restraint system to the vehicle must be taut, all belts that restrain the child must be adjusted to the child’s body. The belts should not be twisted.
3. It is extremely important to ensure that the lap belt is used low down so that the pelvis is secure.
4. It is recommended that the device be replaced when it has been subjected to violent mechanical stress in an accident.
5. It is dangerous to make alterations or additions to the device without the approval of the type approval authority. Failure to follow exactly the installation instructions provided by the manufacturer of the child restraint system can be hazardous.
6. When the chair is not equipped with a fabric cover, it should be kept away from sunlight, as it may otherwise be too hot for the child’s skin.
7. Do not leave children unattended in an enhanced child restraint system.
8. Properly secure any luggage or other items that may cause injury in the event of a collision!
9. Do not use the enhanced child restraint system without its cover!
10. Do not replace the cover of the enhanced child restraint system with anything other than that recommended by the manufacturer, as the cover integral to the performance of the child restraint system.
11. Regularly check the belts for wear, paying special attention to the attachment points, the guards and the adjusting devices!
12. Do not leave the buckle partially closed, it should be locked when all parts are engaged. You must be able to remove the child from the seat immediately in the event of an emergency. Your child should be taught never to play with the buckle.
13. Store the child seat in a safe place out of the reach of children when not in use. Avoid placing heavy objects on the seat. Do not allow your car seat to come into contact with corrosive substances like battery acid.
14. For the “i-Size enhanced child restraint system” the user must read the vehicle manufacturer’s instruction manual!
15. Do not keep your child on this safety seat for a long period of time. During long journeys, take more breaks and remove the child from the safety seat.
16. Not to be used before the child’s age has reached 15 months and before they have reached a height of 76 cm.
17. The images on the front page and inside the manual are for illustrative purposes and may differ from the actual product.
18. Do not use the enhanced child restraint system if the buckle position of the adult seat belt with respect to the seat’s main anchor points is unsatisfactory, please contact the manufacturer if in doubt.
19. Do not use anchor points other than those described in the instructions and marked on the enhanced child restraint system, please contact the manufacturer if doubt.
20. Before the first use of the product, remove all marketing materials, as well as the devices used to attach them to the product.

WASHING INSTRUCTIONS

1. The car seat can be cleaned with lukewarm water and soap. Do not use aggressive cleaning agents such as abrasives or solvents.
2. The cover must be hand washed at a maximum temperature of 30°C. Do not put it in the dryer. Allow the cover to air-dry.
3. Plastic parts can be cleaned with a damp cloth. Do not use abrasives.
4. Never use lubricant or solvent on any part of the seat.

TYPES OF APPROVED BELTS TO HAVE IN THE CAR
Your child seat can be installed ONLY in the direction of movement of the car with the help of 3-point belts!!!
A – Car safety belt – Diagonal Belt
B – Car safety belt – Lap Belt

Possibility to install ONLY on seats with 3-point seat belts
CAN NOT BE USED FOR SEATS with 2-point belt!

Characteristics

Picture A

1. Headrest
2. Buckle
3. Buckle pad
4. Adjustment button (Cap of adjustment button)
5. Harness adjustment strap
6. Back
7. Shoulder straps
8. Shoulder pads
9. Seat cushion
10. Headrest adjustment handle
11. Metal hook

Strap length adjustment

1. Loosening the straps: press the button to adjust the straps (Picture 1) and at the same time pull both shoulder straps (Picture 2). Note: Do not pull on the shoulder pads
2. Tightening the straps: place the child in the seat, fasten both straps in the centre buckle (Picture 3, 4) and pull the strap in the middle of the seat (Picture 5). Make sure the belt is not twisted (Picture 6). To release the shoulder straps, press on the red central buckle button (Picture 7).

Headrest and shoulder strap height adjustment.
The headrest can be adjusted in different positions. The height of the shoulder straps is adjusted by moving them to a different position. Release them from the metal hook in the back (Picture 8). Pull the adjustment handle (Picture 9), move the headrest to the desired position up or down according to the height of your child. Release the handle and you should hear a click, which is a signal that the headrest is locked. Please ensure that the headrest and the straps are positioned correctly around the child’s head (Picture 10).

Installation from 76-105 cm with three-point belt Forward-facing

1. Place the seat firmly on the car seat facing forward “in the direction of travel” (Picture 11 ).
2. Remove the inner padding of the seat and headrest.
3. Fasten the seat with the car safety belt by passing the shoulder belt through the guide of the headrest, and pass the lap belt between the armrest and the seat. Fasten the belt latch into the vehicle buckle until you hear a click (Picture 12). Place the child in the car seat, then fasten the shoulder straps into the seat’s centre buckle.

( Storing the harness system)

1. Press the red button to release the shoulder straps from the buckle (Picture 7)
2. Unfasten the backrest cover, then place the shoulder straps on the inside (Picture 15).
3. Pass the buckle under the seat cover (Picture 16) by inserting it into the hole in the base (Picture 17).

Installation from 100-150 cm with 3-point belt Forward-facing

1. Place the child seat on the car seat in the direction of travel.
2. Remove the seat cushions.
3. Place the child in the seat.
4. Pass the car shoulder belt through the headrest guide, and pass the lap belt under the armrest of the seat and over the child’s lap (Picture 19).
5. Fasten the vehicle seat belt into the vehicle buckle until you hear a “click”. Make sure the harness is not twisted or loose.

Removing the cover

1. Removal: pull up the headrest. Detach the top of the cover. Detach and pull out the main cover of the seat. (Picture 20)
2. Replacing the cover: to replace the cover, please repeat the steps above in reverse order.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>