Primevolve PF100 Foldable Fan Instruction Manual

: June 14, 2024
: Primevolve

Table of Contents

Primevolve PF100 Foldable Fan
Safety Instructions
Battery Safety
Care and Maintenance
Description of Parts
Instructions for Use
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Primevolve PF100 Foldable Fan

Primevolve-PF100-Foldable-Fan-PRO

Safety Instructions

When using electrical products, basic safety precautions should always be followed. Check that the voltage indicated on the rating plate corresponds with that of the power supply before connecting the product. Children younger than 3 years old should be kept away from the product unless continuously supervised.
Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if it has been placed in its intended operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not perform cleaning or user maintenance unless they are older than 8 years and supervised.
This is not a toy- children should be supervised to ensure they do not play with the product.
This product contains no user serviceable parts. If the power supply cord, plug or any part of the product is malfunctioning or if it has been dropped or damaged, only a qualified electrician should carry out repairs.
Improper repairs may place the user at risk of harm. Keep hands, fingers, hair and any loose clothing away from the rotating parts of
the product.
Do not use this product for extended periods of time.
Do not use the product for anything other than its intended use.
Do not cover the product.
Do not put objects into any of the openings. Always use the product on a flat, stable surface. This product is intended for domestic use only. WARNING: If a strong odour is emitted from the product, turn the unit off and unplug it from the mains power supply.

Battery Safety

In the event of a battery or cell leaking, do not allow the liquid to come in contact with the skin or eyes.
If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Secondary cells and batteries need to be charged before use.
After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Do not dispose of batteries in a fire.
Do not dismantle, open or shred secondary cells or batteries.
Do not store above 60 °C.
Do not subject batteries to mechanical shock. Do not dispose of exhausted batteries in household waste.
Once the batteries have been exhausted dispose of the product at a local recycling station. Contact the local government offices for further details.
This product is fitted with a 3.7 V Lithium rechargeable battery (non-removable).

Care and Maintenance

Always wait until the fan has stopped completely and unplug it from the power supply before performing any cleaning or user maintenance. The front grill of the fan can be removed to gain access to the fan blade for cleaning purposes. Unscrew the aromatherapy cover and carefully remove the washer from the front grill screw. Slide off the front grill to gain access to the blades. To reassemble, follow these ste s in reverse.
WARNING: Do not attempt to clean the fan blade whilst the fan is in use, as this could cause injury.

Description of Parts

3 in 1 Cordless Fan main unit
Base
Front grill
Rear grill
Fan blade
Power button( )
Speed button( )
Cooling speed indicator lights (1 , 2, 3)
Natural wind mode indicator light( )
LED light button( )
LED ring light
Telescopic extension pole
Extension pole lock
Fan angle adjuster
Aromatherapy cover
Washer
USB Type C charging cable
Charging port
Low wind speed
Medium wind speed
High wind speed
Fan ON/OFF
Natural wind, the wind randomly up and down
Enhanced light brightness
Dim the light or turn it off
T urn off fan and light

Instructions for Use

Before connecting to the power supply, place the fan onto a flat, stable surface, allowing for sufficient distance between the fan and any objects that could get damaged or caught in the fan blade.

Assembling the 3 in 1 Cordless Fan

The fan arrives fully assembled and folded. Exercise caution whilst reassembling the fan after cleaning.

STEP 1: Use the fan angle adjuster to lift the telescopic extension pole to a 90 °angle.Carefully unfold the fan from the base in an anticlockwise direction and tilt to the desired angle.
STEP 2: To adjust the height of the fan, gently pull on the telescopic extension pole until the desired height is reached. To reduce the height, gently push down on the extension pole.
STEP 3: To secure the telescopic extension pole in place, twist the extension pole lock 1n a clockwise direction until the extension pole cannot be moved.
STEP 4: To use the aromatherapy feature, unscrew the aromatherapy cover and place on a flat, stable surface. Drop 1 or 2 drops of a suitable aromatherapy ltqu1d onto the material inside the aromatherapy cover. Replace the aromatherapy cover on the fan by screwing in a clockwise direction until secure.
STEP 5: To prepare the fan for storage, turn the fan off and ensure it is not plugged into the charger. Collapse the telescopic extension pole and unlock the extension pole lock and collapse the fan head. Make sure everything latches into place.

Wall Mounting the 3 in 1 Cordless Fan
The fan should be mounted on a heat-resistant wall with the base at least 150 cm off the floor and a gap of at least 200 mm on all sides. This will allow for good air circulation. The fan is not suitable for placing in an alcove.

STEP 1: Check that the wall on which the fan will be mounted is strong and stable enough to support its weight.
STEP 2: Using a pencil, mark two pilot hole locations 100 mm apart. For the third pilot hole. measure halfway between the two holes and downwards by 110 mm. Make sure the locations are marked accurately before drilling.
STEP 3: Using a suitable drill bit, drill pilot holes at the marked locations. Consult a qualified professional if required.
STEP 4: Insert a wall plug ( not included) into each pilot hole so that the wall plug sits flush with the wall surface. Position an appropriately sized screw (not included) into each wall plug and fix into place using a screwdriver. Make sure a suitable amount of the screw head protrudes from the wall plug for the fan to hang from.
STEP 5: Place the fan onto the wall mounted screws, checking that each screw has properly engaged with the fan and can support its weight.
STEP 6: The fan can be extended and tilted following the instructions in the section entitled ‘Using the 3 in 1 Cordless Fan’.

CAUTION: Check that no electrical, plumbing or gas supplies are situated beneath the surface of the wall before drilling. Testers are available from all good DIY stores.
WARNING: Only extend the telescopic extension pole to max. 30 cm when the fan is mounted to a wall. Extending any further will affect its stability.

Charging the 3 in 1 Cordless Fan
The fan is fitted with a 3. 7 V Lithium mAh battery (non-removable). It is recommended that the battery is fully ch arged before first use; this will take approx. S hours. Connect the Type C port end of the USB charging cable into the charging port on the fan and the USB end to a compatible USB port. Whilst charging, the indicator lights will flash. Once the battery has fully charged, the indicator lights will fully illuminate. Carefully disconnect both ends of the USB charging cable and store it safety for future use.

NOTE: It is advised that the fan is not used whilst charging, as this could reduce the life of the battery.

Using the 3 in 1 Cordless Fan

STEP 1: Check that the USB charging cable is unplugged from the fan.
STEP 2: To turn on the fan, press . The first cooling speed indicator light will illuminate to signal the fan is operating at speed setting 1.
STEP 3: To increase the fan speed press once for speed setting 2 or twice for speed setting 3.
STEP 4: To activate natural wind mode press to cycle through the settings until the natural wind mode indicator light ( ) starts to flash. Slightly loosen the aromatherapy cover; the front guard will begin to rotate to create a natural wind effect.
STEP 5: Turn off the fan by pressing until the blade stops rotating and no LED indicator lights are flashing.

NOTE: To check the remaining battery life of the fan during use, press and hold for approx. 4 seconds. The indicator lights will illuminate for approx. 3 seconds to show the battery charge level; 1 illuminated indicator light signals that the fan is 25 % charged, 2 signal it is 50 % charged, 3 signal it is 75 % charged and 4 signal it is fully charged. The desk fan can be tilted vertically up to 180 ° to adjust the direction of the airflow.
WARNING: Do not cover the fan head.

Using the LED Ring Light

STEP 1: To turn on the LED light, press To turn off the LED ring light, press the again.
STEP 2: To adjust the brightness of the LED light whilst it is switched on, press and hold until the desired brightness level is reached.

Specifications