MINISO KG13 Karaoke Microphone with Built-In Wireless Speaker User Manual
- June 5, 2024
- MINISO
Table of Contents
MINISO KG13 Karaoke Microphone with Built-in Wireless Speaker
Overview
- MIC VOL: Microphone volume button
- REMIX VOL: Mixed sound volume button
- M/POWER: Turn on/turn off/mode change button
- V+: Next track/volume+
- lI: Pause/play/answer calllend call
- IN-: Previous track/volume
- LED: Light/mute button
- Sound changer
- TF card slot
- Micro USB power port
- USB Port for External USB Flash Drive
- External device audio port.
Parameters
| BT Version | 4.2 | Output Power | 3W |
|---|---|---|---|
| BT Name | MINISO-KG13 | Frequency Range | 100hz-10khz |
| Charging Port | Micro USB | Sensitivity | **** |
-50±3dB
Battery Capacity
| ****
BOOmAh
| ****
Charging Time
| ****
About 2-3h
Instructionsction
| Function | Instruction |
|---|---|
| TumOn | Long press button 3 |
| TumOff | long press button 3 |
Painng
| Tum the device on and open Bluetooth, connect the pairing name of MINI$0-KG13
Play/Pause
| When playing,short pressbutton5:
Whenpauslng. short pressbutton 5
PreviousTrad</
Volume•
| When playing,short pressbutton6 for previous trad<:
When playing, long press button 6 to lower the”°”‘ me
next track
Nol!ome +
| When playing,short press button 4 for next track;
When playing,longpressbutton4 toraise the volume
LED Light
| ****
== ttu:’utC:LEDhght;
–| PressbuttonB to change sound
Cautions
- Reasonable control of the volume and time of usage is required to avoid hearing damage
- For your safety, do not use it in potentially hazardous conditions.
- Keep it out of reach of children to avoid danger caused by improper use.
- Do not throw it to avoid damage caused by dropping.
- Do not use or store it under -10°C or above 35°C to avoid shortening the lifespan of the microphone and battery.
- Do not modify, disassemble or repair the product.
- Irreplaceable battery. It should be disposed of according to local laws & regulations or be recycled by a professional institute. Do not throw away or toss it into the fire.
- When not in use for a long time, charge it every 3 months to extend its service life.
Troubleshooting
-
The microphone fails to be paired with the phone. Solution: Check if the microphone is in pairing mode, and whether the phone has BT function on. Check the list on your phone, remove microphone from the list, follow the instructions of user manual to pair the microphone with your phone again.
-
Cannot tum on the microphone. Solution: Check the battery to see if it is low.
-
Can the battery of the microphone be replaced? Answer: No. The lithium polymer battery in the microphone is irreplaceable.
-
The microphone got disconnected with the phone within 10 meters.
Solution: BT is wireless so that it is very sensitive to objects between the microphone and the connected device. Check if there are any metal or other objects that may affect the connection within the effective distance. -
Cannot hear audio playing when the microphone is connected to the computer or phone. Check whether the computer’s audio output is already connected to wireless device and whether the Bluetooth in the computer supports A2DP protocol. Make sure the volume is up on your phone or computer.
Can I operate the Apps of my phone through the microphone after connecting the microphone to the phone?
- Answer:Some apps may not support being operated through the microphone due to their settings.
Accessories
- Products 1
- Charging Cablex1
- User Manualx1
FCC Warning
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult
the dealer or an experienced radio/TV technician for help. FCC Radiation
Exposure Statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.