inhand IR302 Industrial Iot LTE 4G VPN Router User Manual
- June 5, 2024
- Inhand
Table of Contents
IR302 Industrial IoT LTE 4G VPN Router
User Manual
How to use the router with a SIM card?
-
Insert the SIM card into slot 1 and attach 4G antennas to the Main and AUX connectors; then power cycle the device. To replace or insert SIM Card, the device must be powered off to avoid data loss or equipment damage.
-
Connect the LAN2 port with your PC.
-
Fill in the IP of the router on the browser (you could find the IP on the label of the router).
IP: 192.168.2.1 User name/password: adm/123456 -
Go to ‘network >>Cellular’, select ‘profile 1′ under the `network provider(ISP)’, and fill in the SIM card information in the Profiles table down below: APN, User Name, Password, (User Name and Password are not mandatory), hit ‘ok’ and ‘Apply’.
Notice: Please make sure the APN is correct. If you are not sure, please confirm with ISP or search it on Google.
Below are the most commonly used APN names
Common Access Point Names (APN) by Carrier
Network| APN| Username| Password
AT&T| broadband| |
| psmtneorm| (Business Plan, call AT&T)|
| i2qold| (Business Plan, call AT&T)|
| isp.cinqular| isp@cinqularqprs.com| cinqularl
| ispda.cinqular| ispda@cinqularqprs.com|
cinqularl
| wap.cinqular| wap@cinqularqprs.com| cinqularl
| | |
T-Mobile (3G)| epc.t-mobile.com| |
T-Mobile (4G)| fast.t-mobile.com| |
T-Mobile (Static IP)| b2b.t-mobile.com| |
| | |
Verizon| vs internet| |
| inetqsm.vzw3q.com| 10diqttavzw3q.com| vz’.v
| vzmverison| |
| NE01.VZWSTATIC| (for region North East)|
| WE01.VZWSTATIC| (for region Northwest)|
| S001.VZWSTATIC| (for region South)|
| MW01.VZWSTATIC| (for region Midwest)|
| NW01.VZWSTATIC| (for region North West)|
Some SIM cards require some specific APNs, please confirm with your Carrier
Rogers| Iteinternet.apn| |
---|---|---|---
Itemobile.apn| |
gne.apn| |
internet.apn| |
internet.com| |
vpn.com| |
| wapuserl| wap
staticip.apn| |
Itestaticip.an| |
Bell internet.com
| | wapuserl| wap
inet.bell.ca| |
pda.bell.ca isp.telus.com| |
Talus
y.telus.com| |
xpn.telus.net| |
staticipwest.telus.com| |
staticipeast.telus.com| | _
internet.com| wapuserl| wap
Some SIM cards require some specific APNs, please confirm with your
Carrier
Check the network status, ‘Status >> Network connection’
IR300#How to do a hard reset
Step 1. Locate the RESET button on the InRouter302;
Step 2. Plugin the power supply; press and hold the RESET button within
10 seconds;
Step 3. When STATUS LED is on, release the RESET button;
Step 4. Within a few seconds, the STATUS LED should go off; then press
and hold the RESET button again;
Step 5. When the STATUS LED is flashing, release the RESET button, and
that means the Router is now back to its factory default settings;
Need any support?
Please feel free to contact us:
support@inhandgo.com