luceco LEXS22B40-01 Solar Guardian 1.5W Wall Light with Pir Sensor Instruction Manual
- June 5, 2024
- LUCECO
Table of Contents
LEXS22B40-01 Solar Guardian 1.5W Wall Light with Pir Sensor
Instruction Manual
Installation & Operating Instructions
SOLAR GUARDIAN
1.5W WALL LIGHT WITH PIR SENSOR
NOTE To comply with regulations, installation must be carried out by a
suitably qualified competent person and in accordance with the current IEE
Wiring Regulations (BS7671) and Building Regulations. A copy of the
instructions must be left for the user/maintenance engineer for future
reference.
For non-UK, please refer/consult local requirements
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/ ISOLATED BEFORE COMMENCING
INSTALLATION
ACCESSORIES:
FEATURES & BENEFITS
- Front and rear-facing LED technology provides both functional and ambient illumination
- 2 working modes, defined as overleaf
- Long-lasting battery life 6 hours charge provides illumination up to 3 nights
- Perfect for outdoor entrance areas, balconies, paths, and decorative garden lighting
- IP65 rated with durable impact-resistant housing
- PIR detection range 2-6 meters 10 seconds light illumination
- No wiring, easy & simple installation
SUGGESTED METHOD OF INSTALLATION
-
Select a flat surface that receives direct sunlight
-
Drill 2 holes of 6mm at the requested place, keep 120 mm distance between the 2 holes, 2-4m height from ground
-
Fix 2 rawl plugs into the hole (included)
-
Fix a screw to the lower expansion plug with a little spare space, insert it into the screw groove, and fix
-
Straighten the whole lamp and fasten the upper screw tightly
-
Switch On – fitting will turn on and LEDs will illuminate for a short period before turning off to the normal operation
-
Solar Guardian Housing
-
0.7W Monocrystalline Silicon Solar Cell
-
On/Off Push Button
-
PIR Sensor
-
Front LED Light
-
Rawl Plug (included)
-
Screw (included)
-
Rear LED Light
-
Screw Groove
NOTE
- The lamp will light up when the environmental brightness is less than 30lux
- The product is equipped with an internal lithium battery, please do not replace it by yourself, and don’t put it with household waste or in a fire
- Full battery capacity and lighting time depends on sunlight duration and weather
- If after a period of time the illumination from the LED lights looks dimmed, place Solar Guardian back in direct sunlight for 6 hours and the battery will fully charge returning illumination back to full power
PRODUCT SPECIFICATIONS
Solar Panel: 0.7W, Monocrystalline Silicon
Lithium Battery: 3.7V/1200mAh
LED Qty: 14pcs SMD2835
Rated Power: 1.5W
Illumination Beam Angle: 90°
PIR Sensor Detection Area: 120°/2-6m
Induction Delay Time: 1 second
Working Time: When the battery is fully charged, the lamp can work 3 nights
continuously
Size: 145 x 96 x 79 mm
WORKING MODES
Select by pressing the power button until the desired mode:
MODE A
Automatically turns ON to full brightness mode (220lm) when motion is detected
within 6-meter range and then returns to weak brightness (dimmed front and
backlight on) after 10 seconds of no motion.
MODE B
Automatically turns ON to full brightness mode (220lm) when motion is detected
within 6-meter range and then returns to standby night glow mode (backlight
only on) after 10 seconds of no motion.
United Kingdom Warranty
For other territories and for further information, please see
www.luceco.com for details
Products are protected by a guarantee for a period of 1-year warranty, from
the date of purchase against defects in material and workmanship (unless
otherwise stated). Should a product fail to perform as described within the
warranty period it will be repaired or replaced with the same or equivalent
product by Luceco, free of charge provided that you: (1) return the product to
us with shipping charge prepaid, (2) provide us with proof of the original
date of purchase and (3) quote our return authorization number.
Repaired or replaced products will be returned to you with shipping charges
prepaid. Replacement products may be refurbished or contain refurbished
materials. If in our sole discretion, we are unable to repair or replace a
defective product, we will refund the purchase price of the product.
This warranty will not apply if in our judgment, the product fails due to
damage in shipment, handling, storage, accident, abuse or misuse, or if it has
been used in a manner not conforming to our product instructions, has been
modified in any way, or has any serial number removed or defaced. Repair or
attempted repair will void this warranty. Our maximum liability under the
terms of this warranty is limited to the purchase price of the product covered
by the warranty.
The warranty is given under English Law. If any part of this warranty is
deemed unenforceable (including any provision in which we exclude our
liability to you) the enforceability of any other parts of the warranty will
not be affected. These terms do not reduce your statutory rights.
For Non-UK please contact the Local Luceco Office for details. THESE TERMS AND
CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Eventually, you may want to replace this fitting;
Environmental Protection W.E.E.E (Wheelie Bin Symbol for EU ONLY)
This symbol is known as the “crossed-out” Wheelie Bin Symbol”. When this
symbol is marked on a product or battery, It means that it should not be
disposed of with your general household waste. Some chemicals contained within
electrical/electronic products or batteries can be harmful to health and the
environment. Only dispose of electrical/electronic/ battery items in separate
collection schemes, which cater for the recovery and recycling of materials
contained within. Your co-operation is vital to ensure the success of these
schemes and for the protection of the environment.
Tech Help Line
UK – 0330 0249 279
Non UK – +44 (0)1952 238 100
Supplied by LUCECO
Stafford Park 1
TF3 3BD ENGLAND
Visit our website at www.luceco.com