Luceco LFSP10x130 Castra Floodlight Instruction Manual
- June 12, 2024
- LUCECO
Table of Contents
Luceco LFSP10x130 Castra Floodlight Instruction Manual
TECHNICAL SPEC:
Non-Replacable Light Source
The light source contained in this luminaire is not replacable, at the end of
life the luminaire shall be destroyed
x: Stand for the colour of the product. It could be B/W.
This product range is designed for domestic outdoor use. Not suitable for interior use. If outdoor connection is required, use a suitably IP rated junction box and terminals. Glands used must be suitable for HO5RN-F cable as supplied with the luminaire. The Floodlight is pre-wired with 1.0M of H05RN-F 3*1.0mm² cable, The external flexible cord or cable of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
NOTE – To comply with regulations, installation must be carried out by suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS761) and Building Regulations. A copy of the instructions must be left for the user/ maintenance engineer for the future reference.
For non-UK, please refer/consult local requirments
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/ ISOLATED BEFORE CIMMERCING INSTALLATION
NOTE – During the first 48 hours of operation, the PIR may cause the LED floodlight to operate as it self adjusts to the ambient light level of the installation.
PIR
The PIR Sensor can be aimed to cover the desired detection area, and has a
maximum range of up to 10 Meters over a 1200 degree area. Detection range is
controlled by the angle of the PIR, For Maximum Range, point PIR directly
horizontal. to reduce range, tilt the PIR towards the ground.
PIR Settings allow the following adjustments:
- Time ON from 10 seconds (+/- 5 seconds) to 8 minutes (4/- 2 minutes), turn the control clockwise to increase duration the floodlight will illuminate for when movement is detected
- Ambient Light 2 Lux to 2000Lux, ambient light controls when the PIR will detect movement. Turn Anti-Clockwise to increase level of ambient light for when the PIR will detect movement. 2000Lux is typical daylight, 2 lux is near complete darkness. For Typical Dusk light levels, we suggest around 50% setting.
Dusk Till Dawn Mode:
The PIR features an internal photocell, that can detect light levels to come
on and stay on all night until set lux level is reached. Ideal for all night
illumination.
The turn on/off light level is set by the lux dial.
To initiate Dusk till Dawn Mode. turn the power supply OFF/ON/OFF/ON within 2
seconds
To turn Dusk till Dawn Mode OFF, turn the power off for a minimum of 5
seconds, this will reset back to full automatic PIR detection of the
installation.
United Kingdom Warranty
For other territories and for further information, please see www.luceco.uk for details
Products are protected by warranty for a period of 3 years from date of purchase against defects in material and workmanship (unless otherwise stated). Should a product fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of charge provided that you: (1) return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return authorization number.
Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in our sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product.
This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or defaced. Repair or attempted repair will void this warranty. Our maximum liability under the terms of this warranty is limited to the purchase price of the product covered by the warranty.
The warranty is given under English Law. If any part of this warranty is
deemed unenforceable (including any provision in which we exclude our
liability to you) the enforceability of any other parts of the warranty will
not be affected. These terms do not reduce your statutory rights.
For Non-UK please contact Local Luceco Office for details. THESE TERMS AND
CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Eventually, you may want to replace this fitting;
Environmental Protection W.E.E.E (Wheelie Bin Symbol for EU ONLY)
This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery. It means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment.
Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.
Tech Help Line
UK – 0330 0249 279
Non UK – +44 (0)1952 238 100
Supplied by LUCECO
Stafford Park 1, Telford, Shropshire,
England, TF3 3BD
Visit our website at www.luceco.com
Support Technique
UK – 0330 0249 279
Non UK – +33 (0)1 61 10 10 35
Notice fournie par
Luceco SAS France & Belux 3
Rue de Courtalin, Magny Le Hongre 77700
FRANCE & BELUX
Visitez note site Web www.luceco.fr
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>