HP h10032 All-in-One Printer User Manual
- June 3, 2024
- HP
Table of Contents
h10032 All-in-One Printer
User Manual Setup Guide
HP Office Jet
8010e series
h10032 All-in-One Printer
Remove all tape and packaging material.
Plug in to automatically power on. Select language and country/region.
Open the front door and then lift the cartridge access door by the scanner lid. Remove the plastic guard. Remove cartridge packaging tape, and orange guards.
Insert each cartridge securely into the indicated slot. Close both doors. Note: Make sure to use the cartridges provided with the printer for setup.
Open the paper tray, remove the cardboard, and slide out the guides. Load a Letter or A4 paper and adjust the guides. Close the tray. Pull open the output tray extender.
Use the control panel to print and scan the alignment page.
Use the control panel to print and scan the alignment page.
Follow instructions in HP Smart to connect the printer to a network and
activate HP+ features.
If connecting the printer to Wi-Fi, your computer or mobile device must be
near the printer during the setup. See Reference Guide for Wi-Fi
troubleshooting and tips.
Get help with setup
Find setup information and videos online.
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other
countries.
App Store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
Printed in Thailand Imprimé en Thaïlande Impreso en Tailandia
© Copyright 2021 HP Development Company, L.P.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>