SoundPEATS Halo Bluetooth Speaker User Guide
- June 5, 2024
- SoundPEATS
Table of Contents
SoundPEATS Halo Bluetooth Speaker
Product Diagram
Pairing
- Long press the MFB for 1.5s to turn on, and the indicator starts to flash blue for 1s, then the Bluetooth speaker enters pairing mode, and the indicator flashes in blue and green alternately.
- Activate Bluetooth on the device, and choose “SOUNDPEATS Halo” on the Bluetooth list to pair.
Reset
- Please plug the Type-C charging cable into the speaker, and make sure they are in charging status.
- Under the power-on status, long-press the Bluetooth button for 10s until the indicator flashes in green twice, reset completely.
Enter/Exit stereo Mode
Enter stereo Mode
Under the power-on state, long-press the Bluetooth button for 3s, and the
speaker enters stereo mode. The indicator flashes blue quickly, and then it
enters pairing mode and lasts for 3 minutes.
Note:
Under the power-on state, the speaker pairs to the phone at first is the main
unit. In stereo mode, only the main speaker can hold the call.
Exit stereo Mode
Long press the Bluetooth button for 3s again to exit the stereo mode, it only
works on the speaker being operated, then the speaker will return to pairing
mode after exiting stereo mode.
Note:
After exiting stereo mode, only the main speaker can connect with the phone.
Button Control
| Power On | Long press the MFB for 1.5s |
|---|---|
| Power O | Long press the MFB for 3S |
| Play/Pause | Press the MFB once |
| Volume Down | Press the “-” once |
| Volume Up | Press the “+” once |
| Previous Track | Long press “+”for 1.5s |
| Next Track | Long press “-”for 1.5s |
| Answer/Hang Up Phone Call | Press the MFB once |
Switch Between Two Active
Calls
| Long press the MFB for 2s
Disconnect Bluetooth and Enter
Pairing Mode Manually
| Press the “Bluetooth button” in the power-on
status
Activate/Close Voice Assistant| Press the “Voice assistant button” once
Activate/Close Ambient Light| Long press “Voice assistant button”for 3s while
the speaker is on
Charge
- Use a Type-C adapter to charge the speaker (current less than 1A) . The LED flashes slowly in red while charging and go off when fully charged.
- Please charge the speaker at least once per 3 months when not in use for a long time.
Q&A
-
Q1: How to enter stereo mode?
The stereo mode requires 2 speakers to be used simultaneously. We recommend you to buy 2 speakers to have a better music experience. -
Q2: How long can the speaker play with a single charge?
The speakers can work continuously for 8 hours with a single charge. If you don’t use the speaker for a long time, please turn it off or deactivate your phone’s Bluetooth, the speaker will power off automatically after 3 minutes. -
Q3: Why two speakers can not enter stereo pairing?
Pls, confirm that two speakers have connected with mobile successfully. If yes, pls clear the paring record of speakers from the mobile and make sure two speakers are paired with each other, the LED of the main speaker flashes blue and green, and the second speaker’s LED stays green. After that, activate Bluetooth on the mobile, and choose “SOUNDPEATS Halo” on the Bluetooth list to pair.
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited Room 1308-1309, Building B, Huaihai Square, Chuangye Road, Longhua District, Shenzhen, China. 518109 support@soundpeatsaudio.com www.soundpeatsaudio.com