Gerlach GL 4219 5L 1800W Planetary Food Processor User Manual
- June 5, 2024
- Gerlach
Table of Contents
GL 4219
User Manual
SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial purpose.
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The appliacable voltage is 220-240V, ~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are c arried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it of f from the network, unplug the power.
- Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to b e replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let cord hang over edge of counter.
- For additional protection, it is advisable to install a residual current device (RCD) with a rated residual current in the electrical circuit.
- Do not immerse the motor unit in water. Do not wash in dishwashers.
- Before cleaning and removing accessories set speed control to OFF position and unplug the power cable.
- Before operating the device check if all parts and accessories are properly mounted.
- During mixing of hot products exercise extreme caution to avoid burning.
- The device has been designed to prepare small amounts of food products. The device is not intended for industrial food processing.
DESCRIPTION OF THE DEVICE
(figures 1 and 2 and 3)
1. Top of food processor
2. Tilt button
3. Bowl 5,0 liters| 4. Base
5. Bowl cover
6. Speed selector
---|---
A Dough hook
B Mixing beater
C Egg whisk
D – spatula
BEFORE USING MULTIFUNCTION FOOD PROCESSOR
Before assembling the food processor, be sure the power cord unplugged from the power outlet and the speed selector is on the “0” position.
-
Press the tilt button (2), the top of the mixer (1) will automatically release and lock into the tilt position.
-
Select the desired attachment, which is depending on the mixture to be performed:
A – dough hook for kneading the paste,
B – mixing beater for mixing and beating eggs and butter,
C – egg whisk for beating and frothing the egg white/cream / liquid food. -
Insert the desired attachment directly, until it lock into correct position see figures 4 and 5.
Note: Ensure the attachment is fully inserted into the socket, otherwise your mixing result may be affected. -
Place the bowl (3) on the base (4), then turn the bowl (3) in clockwise until it locks.
-
To lower the top of food processor (1), press the tilt button (2) and push by one hand the top of food processor (1) down. A click sound will be heard when the head has reached the correct position. Make sure the bow cover (5) is fixed in place (see figure 1).
FOOD PROCESSOR USING
-
Ensure that the speed selector is at the OFF position, then insert the plug in the power source.
-
Turn the speed selector (6) to your desired speed setting from “0” that means OFF position till “6” means the fastest speed.
Attachment A: suitable for speeds 1-3. Time of operation: at speed 1,2: 30 seconds, at speed 3: 2-4 minutes.
Attachment B: suitable for speeds 1-4. Time of operation: at 1-2 speeds: 1 minute and at speeds 3-4: 3-4 minutes.
Attachment C: suitable for speeds 5-6. Tune of operation: 5-7 minutes. To whip the egg whites, use a minimum of 3 eggs, and maximum of 15 egg whites. Warning: Do not put knife, metal spoons, fork, spatula and so on into the bowl when it is operating. -
The max operation time in one cycle shall not exceed 7 minutes. 40 minutes minimum rest time must be maintained between 2 consecutive cycles.
-
When mixing is completed, turn the speed selector to “0” position, unplug the cord from power outlet.
-
Hold down the tilt button (2), the top of the mixer (1) will automatically lift and lock into the tilt position.
-
If necessary, you can scrape the excess food from an attachment by plastic spatula (D).
-
Pull out the mixing attachment with a little force by turning to the left side and then down. The speed selector must be at “0” position and the power outlet must be unplugged before pulling out the mixing attachment. The food processor will automatically switch off after the locked-rotor motor stop working for 15 seconds. T
CLEANING AND MAINTENANCE
- Unplug the device from the power and let it cools down before cleaning.
- Remove the accessories before cleaning them in water with washing-up liquid. Do not wash in dishwashers.
- Wipe the external parts with kitchen towel or soft cloth.
- Do not use abrasive materials to clean the device.
- Don’t immerse the base in water or other liquids.
TECHNICAL DATA
Power supply: 220-240V ~50/60Hz
Power: 1000W
Max Power: 1800W
Stainless steel bowl 5 liters Max operation time in one cycle: 7 minutes.
Minimum rest time between cycles: 40 minutes.
Device is made in class II of insulation. Device is compliant with EU
directives:
• Low voltage directive (LVD)
• Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.