Gerlach GL 7729 Ceramic Heater 1500 W User Guide

: June 5, 2024
: Gerlach

Table of Contents

USAGE
OVER-TIP PROTECTION
OVERHEATING PROTECTION
CLEANING AND MAINTENANCE
TECHNIAL DATA
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Model indentifier: GL 7729
user manual

Item	Symbol	Value	Unit		Item	Unit
Neat output		Type of heat input, for electric storage local space heaters

only (select one)
Nominal heat output| Pno| 1,8| kW| | manual heat charge control, with integrated thermostat / reczny •egulator doprowadzama ciepta z wbudowanym termostatem| (no)
Minimum heat output| Pno| 0,9| kW| | manual heat charge control with room and /oroutdoor temperature feedback / many regulator doprowadzania oepia z pomiarem temperatury w ponveszczeniu lub na zewn4trz| (no)
Maximum continuous heat output| Pmax,c| 1,8| kW| | electronic heat charge control with room and for outdoor temperature feedback| (no)
Auxiliary electricity consumption| | | | | fan assisted heat output| (no)
At nominal heat output| el max| N/A| kW| | Type of heat output/room temperature control (select one) (no)

At minimum heat output|

el max

| N/A| kW| | single stage heat output and no room temperature control| (no)
In standby mode / W trybie czuwania| el max| 0,00032| kW| | two or more manual stages, no room temperature control| (no)
| | with mechanic thermostat room temperature control| (no)
| | with electronic room temperature control|
| | electronic room temperature control plus day timer| no
| | electronic room temperature control plus week timer| (no)
| | Other control options (multiple selections possible) (no)
| | room temperature control, with presence detection| (no)
| | room temperature control, with open window detection| (no)
| | with distance control option, z regulacja na odlegloic| (no)
| | with adaptive start control| (no)
| | with working time limitation| (yes)
| | with black bulb sensor| (no)
Contact / Dane teleadresowe| Adler Sp. z o.o. ul. Ordona 2A, 01-237 Warszawa, Polska

This product is suitable only for occasional use or for use in well-insulated rooms.

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.”

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using children. Do not let the children play with the product. Do not let children or people who do not know the device use it without
supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or
knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid
hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over the edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
Never use this device close to water, e.g.: under the shower, in the bathtub, or above a sink filled with water.
If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
Do not put your fingers or any objects through the ventilation grille
Do not place any objects on the convector. The vents must not be covered by a towel, curtain, etc. may cause a malfunction or fire.
Keep the distance between the convector and other items such as furniture, and curtains.
Convector is equipped with a device to prevent overheating. Automatically turns off the convector in the event of excessive temperature convector (due to clogged vents, fan malfunction ). In this case, disconnect the unit from the power supply, waiting a few minutes, and remove the cause of overheating,
Do not touch the hot parts of the convector. Do not touch the appliance with wet hands.
In the case of a wet convector or falling of any object through the ventilation grille of the convector, turn it off immediately and disconnect from the network. Before re-using with convector call for service.
Do not place the convector directly below the electrical outlet.
Always turn off the convector button before disconnecting it from the mains.
Do not use this heater in the immediate vicinity of a bathtub, shower, or swimming pool
Do not use this heater if it has been dropped
Do not use if there are visible signs of damage to the heater
Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer

WARNING: Do not use this heater in small rooms where there are people who are unable to leave them by themselves unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at least 1 m away from the heater air outlet.

** “Caution Hot Surface” – The temperature of accessible surfaces may be higher when the equipment is in operation, which means that the housing elements become hot during operation during operation, BE CAREFUL !!!
WARNING:** In order to avoid overheating – do not cover the heater. The device is not to be covered with clothing, blankets, and other textile products which could cause ignition.

BEFORE FIRST USE

This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided. The device cannot be used in rooms smaller than the space of floor 4m2.

DEVICE DESCRPTION (Figure 1)

LED screen
Control panel
Air outlet
Base
Tip-over switch
Air inlet at the backside
Power switch

LED Screen (Fig. 2)

1A. Anti-frost function icon
1C. Low heating power icon
1E. Timer Icon
1G. ECO mode Icon| 1B. Fan mode icon
1D. High heating power icon
1F. Power Indicator
1H. Temperature / Time digital icon
---|---

Control Panel (Fig. 3)

2A. ON/Stand-By Button
2C.Timer Button
2E. Oscillation Button| 2B. Mode button (fan / low power / high power)
2D. ECO Button
2F. Temperature / Time Button| 2G. Temperature / Time Button
---|---|---

USAGE

Stand the device on a flat, stable surface with a 1-meter distance from any objects. Do not stand it on carpets. Switch off the power switch (7) to position “0” – off. Plugin the device into a 220-240V ~50/60Hz socket.
To start the device, press the power switch (7) located at the back of the device to position “I” – on.
The power indicator (1F.) will be flashing.
Press the ON/Stand-by button (2A), and your heater will work on the Anti-frost function, at the same time, the anti-frost function icon (1A) will light up. The temperature icon (1H) shows the present temperature in the room. This anti-frost mode keeps the room temperature at 7°C. It means when the room temperature is higher than 7°C, it works at fan mode, when the room temperature is lower than 7°C, it works at high power of heating.
Press the mode button (2B) to select:
– fan mode by pressing once. Then the fan mode icon (1B) will be light up.
– lower heating power 750W by pressing again. Then the low power icon (1C) will be light up.
– high heating power 1500W by pressing again. Then the high power icon (1D) will be light up.
Press the timer button (2C), the timer icon(1E) will light up, and the twinkling sound appeared. Then press the button (2G) to increase the time or (2F) to decrease time. You can select the working timer from 0 to 24 hours. The timer digital icon (1H) will show the number you selected to count downtime to switch off the device automatically. After 5 seconds, the timer digital icon (1H) will show the room temperature again.
Press the ECO button (2D), the ECO mode icon (1G) will light up. Under this function, your heater will be working in low heating power or high heating power. The ECO function will compare the target temperature with the current room temperature, and it will automatically select the most appropriate heating level to guarantee an optimum comfort level while reducing energy consumption. While the ECO function is switched on, your heater may switch automatically to low or high heating levels even several times.
Press the oscillation button (2E), your heater will oscillate horizontally from the left side to the right side, press the button again to stop oscillation.
Press the temperature decreasing button (2F) or press the temperature increasing button (2G) to set the temperature from 10°C to 35°C. When you set the temperature, the temperature digital icon (1H) will show the temperature you selected. And after 5 seconds, the digital icon (1H) will show the room temperature again.
To turn off your heater, press the ON/Stand-By Button(2A). If your heater is working on heating mode, press the ON/Stand-By Button(2A), your heater will work on fan mode for 30 seconds and the digital icon will countdown from 30 to 0 in order to cool down components. Unplug the device when it is not in use.

OVER-TIP PROTECTION

The device is protected with a safety switch – named tip-over switch (5) – that turns off the device automatically when the heater falls over or is at an excessive angle from the horizontal. This helps prevent accidents, and the heater will back to the standby mode. Press the buttons (2A) on control panel to reset the device.

OVERHEATING PROTECTION

In the event of accidental overheating (for example obstruction of air intake and outlet grilles, motor turning slowly or not at all), a safety device shuts down the heater automatically. To reset, disconnect the plug from the power for a few minutes, remove the cause of overheating then plug the device in again.
If you still notice the same defect as above mentioned, remove the plug from the socket and consult your authorized dealer to your after-sales service department.
During use, do not touch or cover the air outlet. This may cause the unit to overheat, and the safety device to operate.

CLEANING AND MAINTENANCE

The device must be switched OFF via the power switch (7) and unplugged before proceeding with any cleaning work. Let the device to cool down for some minutes before starting the cleaning.
Clean the housing with a lightly damp cloth, a vacuum cleaner, or a dusting brush.
Never use flammable or abrasive cleaning agents such as benzene or spirit to clean the appliance.
Never immerse the appliance in the water!
Clean the air inlet and outlet regularly with a vacuum cleaner.
If the appliance is not used for an extended period it must be protected against excessive dust and dirt. Store the heater in a dry place away from sunlight and dirt.

TECHNIAL DATA

**Power 1500W
Power supply 220-240V ~50/60Hz
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may effect the environment. Do not dispose of this appliance in the common waste bin.**