FAQs Will this Bluetooth transmitter work if the Switch is docked? User Manual

FAQs Will this Bluetooth transmitter work if the Switch is docked?

Frequently asked questions and answers

• Q1: Will this Bluetooth transmitter work if the Switch is docked?
  A1: No, it doesn’t fit the switch which is in the dock.

• Q2: Does this Bluetooth transmitter support mic function?
  A2: No, it only supports audio, but doesn’t support phone calls.

• Q3: Can this Bluetooth transmitter be used with a case?
  A3: Yes, this Bluetooth 5.0 Transmitter adapter can work with a case that is no thicker than 2mm(0.08inch).

• Q4: What is the Bluetooth version of this transmitter?
  A4: Yes, it is Bluetooth 5.0.

• Q5: What kind of codec does the transmitter support?
  A5: It supports APTX/APTXLL/SBC.

• Q6: How long will it lag during the usage?
  A6: 40ms if your device is with APTXLL codec; and 100-200ms if your device is with APTXandSBC codec.

• Q7: What is the distance this transmitter supports?
  A7: It provides a stable connection up to 33ft (10M) away from your device.

• Q8: What is the sampling rate for the 3.5 male end of this transmitter?
  A8: It supports 24bit, 44.1K/48K

• Q9: What is the SNR(Signal-to-noise ratio) for this Bluetooth Transmitter?
  A9: It is more than 90dB.

• Q10: How long will it take to fully charge this Bluetooth Transmitter?
  A10: About 2 hours.

• Q11: How long can I use it after this transmitter is fully charged?
  A11: About 8 hours.

• Q12: Does this Bluetooth Transmitter include any power cord?
  A12: No, it doesn’t. You can use any standard 5V cable for charging it.

• Q13: Can I use the transmitter while it is charged?
  A13: Yes, you can do that

• Q14: How many IDs does this Bluetooth Transmitter support?
  A14:It will remember the last two IDs.

• Q15: How to clear the IDs?
  A15:In the “off” condition, long-press and hold the multi-function button for 10 seconds to restore the factory settings.

• Q16: Can I pair this Bluetooth Transmitter with two devices at the same time?
  A16: Yes, it can be paired with two Bluetooth devices and output the sound simultaneously. For example, device A and device B. (1) First pair it with device A, and turn off the device A. (2) Double press MFB to enter pairing status, and turn on device B, and then pair it with device B. (3) Turn on device A so that the unit will reconnect device A. (4) Connect to an audio source to confirm both device A and B work properly.

• Q17: How to do a factory setting for this Bluetooth Transmitter?
  A17: In the “off” status, press and hold the power button for 10 seconds, then the white light will be on for 2.5 seconds. It means that the unit will be restored to the factory setting and enter the pairing status.

• Q18:How to solve the problem of low sound when connecting to AirPods?
  A18: If there is no sound or the sound is very low when using with AirPods, please reset your Airpods first, and then re-pair it for a try.

• Q19: What should I do when I have problems with pairing or cannot connect?
  A19: If UGREEN Bluetooth 5.0 Transmitter can not pair or connect successfully, please do a factory reset for a try.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>