GoDaddy 090321 Poynt Card Reader Instruction Manual
- June 5, 2024
- GoDaddy
Table of Contents
GoDaddy 090321 Poynt Card Reader
Product Specifications
Cautions & Important Notes
- Ensure the device is fully charged before use.
- Please ensure the magstripe or EMV chip of the card is facing the right direction when swiping or inserting card. The NFC card should be tapped within a 4 cm range on top of the reader mark.
- Don’t drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint or insert foreign object into the device. Doing any of which will damage the device and void the warranty.
- Don’t immerse the device into water and place near washbasins or wet locations. Don’t spill food or liquid on the devices. Don’t attempt to dry the device with external heat sources, such as a microwave or hair dryer. Don’t use any corrosive solvent or water to clean the device.
- It’s recommended you only use a dry cloth to clean the surface.
- Don’t use any sharp tools on the internal components, connectors or contacts. Doing so may lead to device malfunction and void the warranty.
Battery
This device contains a built-in lithium-ion battery. Improper use of which may
result in overheating, fire, and injury. The battery in this device is not user
replaceable and should only be replaced by an authorized service provider.
For optimal lithium-ion battery performance, follow advised guidelines:
- Operating Environment Temperature
- Storage Environment Temperature
- Charge Poynt Card Reader with approved Docking Station or approved Power Adapter set to 100% full charge at least every 3 months.
Please note:
- Not following above guidelines may result in the battery capacity draining quicker, increase duration to achieve full charge, impede ability to achieve full charge, and deplete battery to zero capacity.
- Not following above guidelines may result in the product not functioning, rendering it unusable or unrecoverable.
Disposal Information
Recycle and dispose of in accordance with local, state and federal
regulations. This device must be recycled or disposed of separately from
household waste or recycling.
Troubleshooting
Warranty
-
Any damage or defects caused by a failure to follow the instructions that relate to this device or as the result of
an accident, abuse, misuse, misapplication, product modification, improper voltage or current, acts of God, shipping damages or loss, or damage caused by service performed by anyone other than our company are expressly excluded from the warranty stated below. -
We are not under any obligation to support the device for all operating environments, including but not limited to, interoperability with all current and/or future versions of Software/ hardware
-
Please contact the dealer for any warranty or customer support services. Any repair of the device by yourself will void the warranty.
FCC Caution Statements:
FCC Supplier’s Declaration of Conformity:
Poynt Card Reader
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Poynt, LLC
2155 E GoDaddy Way
Tempe, AZ 85284 USA
https://www.poynt.com/legal
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
Copyright © 2021 Poynt, LLC. All Rights Reserved. The Poynt word mark is a
registered trademark of Poynt, LLC in the US and other countries. The GoDaddy
word mark is a registered trademark of GoDaddy Operating Company, LLC in the
US and other countries.