REDMOND NS-3018 Coffee Grinder User Manual

REDMOND NS-3018 Coffee Grinder

IMPORTANT SAFEGUARDS

1. Use only with 120 Volt current. Use only on alternating current (AC).
2. Do not operate the grinder with a damaged cord or plug, or if the grinder malfunctions.
3. Repairs are to be performed only by authorized service centers. An improperly repaired grinder is a source of risk to the user and voids the warranty.
4. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
5. Do not place on or near a hot gas or electric burner, or in a heated oven.
6. Keep your grinder out of the reach of children.
7. Only original spare parts can be used for this machine.
8. Shut off and unplug the grinder from the electrical outlet when not in use and before cleaning.
9. Do not immerse the grinder, plug or cord in water or any other liquid. NEVER clean any parts of the grinder in the dishwasher. (Do not place your hand in or near the burrs.)
10. Do not use harsh chemicals or abrasive agents to clean these parts.
11.  When the product is running, the blade is rotating, don’t try to take food from the cup or add other liquids into the cup, until the grinder completely stop and unplug the power cord, then you can get your food.

GENERAL DESCRIPTION

1. LID
2. MOTOR UNIT
3. ON/OFF SWITCH
4. BLADE
5. METALLIC BOWL

INSTRUCTIONS

1. Electric Parameters: 120V/60Hz/160W (Point move gear )
2. Prior to using your grinder for the first time you should clean the mixing cup, cup cover and other parts.
3. Place the grinder on a level surface, and install the mixing cup on the machine.
4. Put the coffee beans into the the mixing cup.
5. Mixing cup one glyph knife group: It is mainly used for grinding coffee beans; The maximum capacity is 80g.
6. Always operate the grinder with the ground coffee container and lid in place.
7. Connect the grinder to the power, press down the ON/OFF switch, start to work.
8. Do not continue to run the grinder for more than 30 seconds; After continuous use 3 cycles, should cool down the grinder to room temperature, then you can continue to use it.

WASHING INSTRUCTIONS

It is recommended to take out all the ground coffee in order to avoid it lose its aroma.

1. Always unplug your coffee grinder before cleaning
2. Remove the lid and rinse under running water and then dry it completely. Please attention: the lid cannot be cleaned in a dishwasher.
3. Turn the blade counterclockwise and remove it. Clean it and dry thoroughly.
4. Clean the metallic bowl with a damp sponge.

 RECOVERY PROCESSING

Please do not combine discarded products with general production waste. They should be sent to the officially designated recycling center. This Process mode is more environmentally friendly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>