REDMOND CM002 Programmable Coffee Maker User Guide
- June 15, 2024
- REDMOND
Table of Contents
REDMOND CM002 Programmable Coffee Maker
PRODUCT INTRODUCTION
INTRODUCTION OF LCD DISPLAY
-
After being powered on, its default mode is regular concentration.
BREW STRENGTH SETTING -
Long press “PROG” for 3 seconds and the sign … ‘Of” is on, entering into strong coffee mode.
-
Long press ‘PROG” for 3 seconds again to cancel the strong coffee mode.
-
Long press “ON/OFF” button for 2 seconds to enter coffee-brewing status, the red light “• is on
-
After brewing, the coffee maker will automatically enter warm-keeping status, and the sign “KEEP WARM” is on.
-
Don’t touch the heating plate when the “KEEP WARM” is on, to avoid scalding.
-
To stop coffee-brewing or warm-keeping status, long press “ON/OFF” button for 2 seconds.
-
After the strength setting, press “PROG” button and the sign “CLOCK” is on. It is now able to set the Present Time.
-
The time unit will flash sequentially according to “hour” _”minute”. Turn the knob to set “hour” —”minute” accordingly.
-
After the setting of the present time, press “PROG* button and the sign “TIMER” is on. It is able to set Delay Timer now, the same to “CLOCK” setting.
-
Ateres percola esper ao alto o the the pingo ela ay for auto brewing.
Before Use
1. To ensure the good taste of the first brew, preheat the coffee maker in
advance. Add water into the water tank to its half, turn on the coffee maker,
clean all the inner parts once, and repeat 2 to 3 times.
2. Add coffee powder according to the standard. It is recommended to add one
spoon of coffee powder for one cup.
3. To avoid overflow, do not add water over the maximum scale of the water
tank.
THANK YOU FOR PURCHASING OUR PRODUCTS !
Your satisfaction and support mean everything to us. To offer you the best
shopping experience, we provide a 12-month warranty for our products.
If you have any issues with our products, please feel free to contact the
seller or E-mail:∞| cs@redmond.shop our customer
support team are at your service 7 days/ 24 hours and will try our best to
solve your problem. We also look forward to receiving any advice from you
about our products or service and we will make efforts to make them better.