geemarc Amplidect 595 U.L.E Cordless Phone Handset User Guide
- June 5, 2024
- geemarc
Table of Contents
geemarc Amplidect 595 U.L.E Cordless Phone Handset
HANDSET
INSTALLATION
- Connecting the telephone
- Connect the power adapter jack to the base (C) then connect the power adapter plug-in mains power (D). Note: Use only the power adapters supplied with the phone.
- Connecting the battery
- Slide the battery cover downwards. Install the 3 batteries into the socket as indicated, matching the correct polarity (+,-). Align the cover flat against the battery compartment, and then slide it upwards until it clicks into place.
- Charging the batteries
- Charge the batteries for at least 16 hours when charging for the first time
FIRST USE OF YOUR HANDSET
- After you have inserted the batteries, the display asks you to select your text language with the keys ▼/▲(5/7), Press MENU/OK (4) to valid.
- Then display REGISTER, make the procedure in the chapter “HANDSET REGISTRATION”.
- Then enter the date with the keypad and validate by pressing
- MENU/OK (4).
- Enter the correct hour with the keypad and validate by pressing
- MENU/OK (4).
- Select your talking language with the keys ▼/▲(5/7), Press
- MENU/OK (4) to valid.
HANDSET REGISTRATION
Up to four handsets can be registered to a single base station. Registering a handset On the main Base: press and hold /HANDSET LOCATOR on the base until you hear a beep to enter the registration mode. At the same time On Handset, it is display REGISTER: Press MENU/OK (4). REGISTERING will be displayed. After a short delay, if the registration is successful, there will be a confirmation beep, and the handset display will go back to idle mode with the new handset number shown. The base display will also go back to idle mode.
OVERVIEW
Handset
- EARPIECE
- LCD DISPLAY
- CHARGE LIGHT
- Steadily on when the handset is charging in the charger.
- Please refer to our website: www.geemarc.com for an up-to-date user guide, as there may be important updates and changes you need to be aware of !!!
CAUTION Use only the battery provided. There may be a risk of explosion
if the wrong type of battery is used for the parent unit. The battery cannot
be subjected to high or low extreme temperature and low air pressure at high
altitudes during use, storage, or transportation. Disposal of the battery into
fire or a hot oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely high temperature
surrounding environment can result in an explosion or the leakage of flammable
liquid of gas. Battery subjected to extremely low air pressure may result in
an explosion or the leakage of flammable liquid or gas. Dispose of used
battery according to the instructions.
Normal operating temperature for the product (e.g. 0 o C ~ 40o C).
Use only the adapters and battery listed below. Power adapter information: output: 6V DC 0.45A, 2.7W. Vtech Telecommunications Limited. Model: VT05EEU06045 (EU), VT05EUK06045 (UK) Rechargeable Battery: Model: KH-AAAJ600-D x 3pcs. 1.2V DC, 600mAh. Corn
PACKAGE CONTENTS
- 1 Charger,
- 1 cordless
- Handset, 1
- power adapter,
- 3 NiMH batteries,
- 1 Quick user guide.
CONNECTION BASE
MENU/OK
In idle mode: Press to access the main menu. In sub-menu mode: Press to confirm the selection. During a call: Press to access Intercom / Phonebook / Redial list / Call log.
UP/CALL LIST
In idle mode: Press to access the redial list. In menu mode: Press to scroll up the menu items. In phonebook list/redial list/call list: Press to scroll up the list. In editing mode: Press to move the cursor one character to the left. During a call: Press to increase the listening volume. During ringing: Press to increase the ringer volume.
TALK ON ( ) SPEAKERPHONE
In idle/pre-dial mode: Press to make a call in earpiece mode. In phonebook/redial list /call list: Press to make a call to the selected entry in the list in earpiece mode. During ringing: Press to answer a call in earpiece mode. On line: Press again to pass in speakerphone mode. Press again to switch to earpiece mode.
DOWN/PHONEBOOK
In idle mode: Press to access the phonebook. In menu mode: Press to scroll down the menu items. In phonebook list/redial list/call list: Press to scroll down the list. In editing mode: Press to move the cursor one character to the right. During a call: Press to decrease the listening volume. During ringing: Press to decrease the ringer volume.
MICROPHONE VOLUME BOOST/SOS ( /SOS )
During a call, Press to activate/deactivate the VOLUME BOOST function. In idle mode: Press and hold for 3 seconds to enter the emergency calling sequence set in your handset. In call mode: press and hold for 2 seconds to stop the emergency call.
TONE
During a call: press this key to increase the high frequency or the low frequencies.
CANCEL/MUTE
In main menu mode: Press to go back to the idle screen. In sub-menu mode: Press to go back to the previous menu. In editing/pre-dial mode: Press to delete a character/digit. In editing/pre-dial mode: Press and hold to delete all the characters/digits. During a call: Press to mute/resume the microphone. During ringing: Press to silence the handset ringer. In idle mode: Press to intercom another handset.
TALK OFF
During a call: Press to end a call and go back to the idle screen. In menu/editing mode: Press to go back to the idle screen. ALPHANUMERIC KEYPAD, STAR (0), HASH ( R) In predial or editing mode: Press to insert a digit / character / / . R during a call: Press and hold to make a Flash (Recall). 0 key in idle/pre-dial mode/number editing mode: Press and hold to insert a pause.
FUNCTIONS
You can find all the functionalities in the main user guide AMPLIDECT595 U.L.E.
INTERCOM
- Internal Call
- Press MENU/OK , and ▼▲ to select INTERCOM, Press
- MENU/OK ,
- Choose the desired handset number and press MENU/OK .
- If you receive a call on the base in speaker mode, the call is automatically transferred to the handset if the handset is removed from the charger.
Call All Handsets
- Make point 1 in the chapter internal call and choose ALL.
- Transfer an External Call
- Make point 1 in the chapter internal call and choose the desired handset number with the key UP/DOWN.
- After connection quit the call on the handset by pressing.
Conference Call
Make point 1 in chapter internal call and choose the desired handset number with the keys ▼/▲. After connection press and hold until CONFERENCE is shown. NOTE: Any party that hangs up during a conference call will leave the other party still connected with the external call. See the user guide for the additional handset.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc product is purchased, the Geemarc guarantee is for a period of two years. During this time, all repairs or replacements (at our discretion) are free of charge. Should you experience a problem then contact our helpline or visit our website at www.geemarc.com. The guarantee does not cover accidents, negligence, or breakages to any parts. The product must not be tampered with or taken apart by anyone who is not an authorized Geemarc representative. The Geemarc guarantee in no way limits your legal rights. IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM
Please note: The guarantee applies to the United Kingdom only.
Recycling Directives
- The WEEE (Waste Electrical and Electronic Equipment) has been put in place for the products at the end of their useful life to be recycled in the best way.
- When this product is finished, please do not put it in your domestic waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
- Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they should accept it.
- If you respect these instructions you ensure human health and environmental protection.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>