JBL Tune 130NC TWS True Wireless Noise Cancelling Earbuds User Guide

JBL Tune 130NC TWS True Wireless Noise Cancelling Earbuds

WHAT’S IN THE BOX

APP

GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.

how to wear

1. Try different sizes for a perfect fit and audio performance

First-time use

power on & CONNECT

DUAL CONNECT + SYNC

CONTROLS

•  Enable advance controls by connecting your JBL TUNE130NC TWS to JBL Headphones App .
•  ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).

power off

MANUAL SETUP

DO MORE WITH THE APP

Charging

led behaviors

TECH SPECIFICATIONS

• Model: TUNE130NCTWS
• Driver Size: 10 mm/ 0.394” Dynamic Driver
• Power supply: 5V 1A
• Earbud: 5.7 g per pc (11.4 g combined)/
• 0.012 lbs per pc (0.024 lbs combined)
• Charging case: 40.4 g/ 0.087 lbs
• Earbud battery type: Lithium-ion polymer (70 mAh / 3.85 V )
• Charging case battery type: Lithium-ion polymer (750 mAh / 3.7 V)
• Charging time: 2 hrs from empty
• Music playtime with BT on
• and ANC off: up to 10 hrs
• Music playtime with BT on
• and ANC on: up to 8 hrs
• Frequency Response: 20 Hz – 20 kHz
• Impedance: 32 ohm
• Sensitivity: 103 dB SPL@1 kHz
• Maximum SPL: 94 dB
• Microphone sensitivity: -10 dBV/Pa@1 kHz
• Bluetooth version: 5.2
• Bluetooth profile version: A2DP 1.3, AVRCP 1.6, HFP 1.7
• Bluetooth transmitter
• frequency range: 2.4 GHz – 2.4835 GHz
• Bluetooth transmitter
• power: <12 dBm EIRP
• Bluetooth transmitter
• modulation: GFSK, π/4-DQPSK, 8-DPSK
• Maximum operation
• temperature: 45°C

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-T130NCTWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.3643 W / kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user’s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

References

• Anatel — Agência Nacional de Telecomunicações

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>