ECCRIS HB-002 ND-01 Manicure Pedicure Set Instruction Manual
- June 5, 2024
- ECCRIS
Table of Contents
ECCRIS HB-002 ND-01 Manicure Pedicure Set
IMPORTANT SAFETY INSTRUCTIONS
We usg the actual machine, the basE precaution should sways be followed, including the following:
READ ALL THE INSTRUCTIONS BEFORE USING
WARNING:
- Keep the unit from heater dervice uhile it is in use, such as the electric heating.radistors, stoves or other devices and equipments (including loudspeskers) etc
- Do not put the machine on a place uhere it is exposed to strongvbration, dust, smoke. chemical and corrosive substances, toxic gases etc.
HOW TO USE
Plag in the USB cabie into USB adaptor (or any USB port sourcas) to the main electric outlet Select the desired speed by turning the varisble speed control knob on the hand piece: To secure the drill bits, push in the desired dril bt firmly into the hole To Remove the drill bits: Turn off the machine and gently pull out the dril bit.
CLEANING AND MAINTENANCE
- When the machine is in use, da not pull AC adaptor out.
- Make sure this unit is cleaned and safely stored before and after every use.
SPECIFICATIONS
- input:110V-240V 50/60Hz
- Drill speed (uploaded): 0-2000ORPM
- Drill Speed (loaded 15500-1700ORPM
- rated Voltage: DC 5V
- Outpul voltage: DC 5w
- Rated Current: 0.1A
- Power supply: US8 sdapter or ay
- USB port sources
- (US8 cable included)
PACKAGE LIST
- Electric Pen- shaped Nail Drill
- USB powar cord wire switch (AC adaptor optional
- Drill Bits
- User Manual
Integrated Handpiece
- Grindine Pinholeinsert the nail bit (only fit3/12’sizel
- Handpiece Bottom:Please do not open, it may cause can not work.
- Forward/ReverserotationClockwise when push upofr station when in the middle Anti-clockwise when push down
- Adjust the speed Operation Ne need to lum rotate anything just insert the3/32″size bits NOTICE Please do not use in max speed for long time,t wil damaga machine motor.its narmal that feel warm whin using because the metal material ransfar heat more dasly than plastic material.
Operation
NO need to turn rotate anything.just insert tge 3/32″size bits
NOTICE
Please do not use in max speed for long time,it will damage machine motor It’s
normal that feel warm when using.because the metal material transfer heat more
easily than plastic material.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>