Lanberg SWV-HDMI-0005 HDMI Switch User Manual

SWV-HDMI-0003 / 0005
HDMI SWITCH
CONMUTADOR HDMI
USER MANUAL

Introduction

This device is a high-performance mini HDMI amplifier/splitter. This type of compact switch not only has the function of signal switching with a simple press of a key (button) but also possesses an infrared remote control and intelligent management feature.
What this means is, that as soon as the source power source is plugged in, the device will react automatically. Also, the product is equipped with a standard infrared receiver: making it safe and convenient.
This type of switch routes the high definition video (in many available resolutions up to 1080p) and digital audio from any of several sources to properly display them. All inputs support connections of Full HD video sources simultaneously and are compatible with devices such as HD-DVD, SKY-STB, PS3, PS4 PRO Xbox 360, etc. The output sends high definition audio-video signals to the HD monitors, TVs, or other displays.

Inter-device auto-switching feature

1.  Make sure to connect all output devices to the switch.

2. When one of the input devices is activated, the switch will automatically select this device. If more than one device will be powered at the same time, they will be selected according to the following scheme:
   Input 1> Input 2> Input 3.

3. When the power is turned off on the currently used device, the switch will automatically switch to the next powered device if available.
   If connected input devices go into standby mode, this may interfere with the inter-device auto-switching feature. To ensure it works properly make sure to turn off devices, which are not being used at a given time.
   For this function to work properly, ensure that switch is powered via the included Micro USB cable.

Cechy produktu

• HDMI version 2.0b
• Max. video resolution up to 4K UHD – 3840 x 2160 @ 60Hz
• HDCP 1.0 / 1.1 / 1.2 / 1.4 / 2.2 compatible
• Uncompressed audio transmission support (e.g. LPCM format)
• Compressed audio transmission support (e.g. Dolby Digital, DTS Digital format)

Product specification

• Connectors:
  SWV-HDMI-0003: Input: 1 x HDMI 2.0b port, Output: 3 x HDMI 2.0b ports
  SWV-HDMI-0005: Input: 1 x HDMI 2.0b port, Output: 5 x HDMI 2.0b ports

• Max. resolution: 3840 x 2160 @ 60Hz

• Max. supported data transmission: 18,5 Gb/s

• Dimensions: 81x58x18 cm

• Weight: SWV-HDMI-0003 – 44 g / SWV-HDMI-0005 – 48 g

• Operating conditions: Temperature: from 0 to 70°C, Humidity: 5% do 90% (without condensation

• Power consumption: SWV-HDMI-0003 – 0.2 A / SWV-HDMI-0005 – 0.3 A

• Power: Micro USB port, 5V/1A (power cable included)

What’s in the box?

• HDMI switch
• Wired IR receiver
• Remote control
• Manual
• Micro USB-A power cable

Product description

1. Input ports 2. Output port 3. Port selection button

Installation guide

1. Plugin the input (transmitting) devices to the HDMI ports labeled as Input ports (e.g. console, PC, Blu-ray player, etc.).
2. Connect the output device to the HDMI port labeled as output (e.g. TV, monitor, projector, etc.).
3. Attach the power supply to the switch via a micro USB cable. USB-A connector must be connected to a free USB-A port on a wall charger / PC / console.
4. Turn on the transmitting device that you currently want to use and then switch on the receiving device.

General safety precautions

1. When connecting and disconnecting HDMI cables, it is advised to do it slowly and gently. Pulling out or pushing in the connectors too hard may damage the device(s) and/or the cable itself.
2.  When using the device, it is recommended to use HDMI cables that support HDMI 2.0b standard, as they are the Premium High-Speed HDMI cables version. The use of cables compatible with the lower standard may result in worse audio-video quality.
3. Avoid installing the HDMI switch in places where the device may encounter moisture.
4. The device is made for indoor use only
5. Do not expose the device to direct sunlight
6. Do not open, repair or in any other way interfere with the device by yourself.
7. Any improper use or man-made damage is not covered by the product warranty.

Connection scheme

Input up to 3 m
Output up to 3 m

The WEEE symbol (the crossed-out wheeled bin) usage indicates that this product is not household waste. Appropriate waste management aids in avoiding consequences, which are harmful to people and the environment and result from dangerous materials used in the device, as well as, improper storage and processing of such equipment. The segregated household waste collection allows the recycling of materials and components of which the device was made. In order to get detailed information about the recycling of this particular product, please contact your retailer or local authority.

www.lanberg.eu

References

• Peryferia do rozbudowy sieci aktywnej i pasywnej | lanberg.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>