Lanberg NC-0300-WI USB Adapter Wireless Network Card Instructions
- June 13, 2024
- Lanberg
Table of Contents
Lanberg NC-0300-WI USB Adapter Wireless Network Card
Product Information
- Product Name: NC-0300-WI Wireless Network Card N300
- Product Features:
- Multi-antenna transmission (MIMO) increases connection speed compared to conventional methods
- Micro-size for greater mobility of the device
- Easy to install and configure with drivers provided on CD
- WEP, WPA, WPA2 encryption support
- Support for WPS 2.0, WPS-PIN, WPS-PBC
- Product Specification:
- Communication: Wi-Fi standard
- Connectors: [Not specified]
- Maximum network link speed: [Not specified]
- Standard: Wireless standards
- Operation modes: [Not specified]
- Chipset: [Not specified]
- Antenna type: [Not specified]
- Number of antennas: [Not specified]
- Antenna power: [Not specified]
- Environment temperature: [Not specified]
- Environment humidity: [Not specified]
- Software: Supported Operating Systems
- Dimensions: 29.2 x 17.4 x 6.65 mm
- Weight: 12 g
- EAN-13: 5901969421569
- CAT. NO: NC-0300-WI
Product Usage Instructions
To use the NC-0300-WI Wireless Network Card N300, follow these steps:
- Ensure that your computer or device has an available USB port.
- Insert the provided CD into your computer’s CD/DVD drive.
- Follow the on-screen instructions to install the drivers for the wireless network card.
- Once the drivers are installed, locate the NC-0300-WI wireless network card.
- Insert the wireless network card into an available USB port on your computer.
- Wait for your computer to detect the wireless network card.
- Configure the wireless network card settings according to your network requirements, such as encryption type (WEP, WPA, WPA2) and network mode (WPS 2.0, WPS-PIN, WPS-PBC).
- Once the wireless network card is connected to your network, you can start using it to access the internet or connect to other devices on the network.
Note: Please refer to the user manual for detailed instructions on configuring the wireless network card settings and troubleshooting common issues.
PRODUCT FEATURES
- Multi-antenna transmission (MIMO) increases connection speed compared to conventional methods,
- Micro-size for greater mobility of the device,
- Easy to install and configure with drivers provided on CD,
- WEP, WPA, WPA2 encryption support,
- Support for WPS 2.0, WPS-PIN, WPS-PBC.
PRODUCT SPECIFICATION
| Communication | Wireless |
|---|---|
| Wi-Fi standard | 802.11n |
| Connectors | USB Type-A |
| Maxiumum network link speed | 300 Mbps |
| Standard | USB |
| Wireless standards | 2×2 MIMO, Frame aggregation, IEE 802.11b/g/n 2.4GHz, IEEE |
802.11e, IEEE 802.11i, IEEE 802.11k, Short Guard
Interval
Operation modes| Client
Chipset| Realtek – RTL8192EU
Antenna type| Internal
Number of antennas| 2
Antenna power| 2 dBi
Environment temperature| from 0 up to 40 °C
Environment humidity| from 10 up to 90 %
Software| Yes
Supported Operating Systems| Linux, MAC, Windows XP, Windows Vista, Windows 7,
Windows 8, Windows Vista 64bit, Windows 7 64bit, Windows 8 64bit, Windows 10,
Windows 10 64bit
Dimensions| 29,2 x 17,4 x 6,65 mm
Weight| 12 g
EAN-13: 5901969421569
CAT. NO: NC-0300-WI
Bulk packaging: Box • 46,5 cm x 26,5 cm x 40 cm • 7,729 kg • 200 pcs.
Despite all efforts, the manufacturer/distributor/seller does not guarantee
that the published technical data, photos and descriptions do not contain any
deficiencies or mistakes. The above catalogue is for information purposes and
does not constitute an offer within the meaning of the Civil Code.