IMOU Bullet 2S Wi-Fi Camera User Guide
- June 5, 2024
- imou
Table of Contents
Quick Start Guide
Bullet 2S
Bullet 2S 4MP
Welcome
Thank you for choosing IMOU.
We are devoted to providing you with easy smart home products.
If you have problems using the product, please contact our service team before
returning your product.
Our service mail:
service.global@imoulife.com
Frequently asked questions can be found at
imoulife.com/support/help
http://www.imoulife.com/web/support/help
Package content
Camera introduction
| 
---|---
The pattern of the LED indicator is included in the following table.
| LED Status | Device Status |
|---|---|
| Off | • Powered off/LED turned off |
• Rebooting after reset
Red light on| • Booting
• Device malfunction
Greenlight flashing| • Waiting for network
Greenlight on| Operating properly
Red light flashing| Network connection failed
Green and red light flashing alternately| Firmware updating
1
http://mobile.easy4ipcloud.com/imou/detect.html
Tips
To ensure the best possible wireless performance, please make sure there are no obstacles and electromagnetic interference between the camera and router.
2
**3** Installing the Camera
Troubleshooting
| Problem | Solution |
|---|
The APP says “Failed to
configure device network”| • Reset your Camera and connect it again.
• Some cameras only support 2.4GHz, while some routers have dual-band,
2.4G/5G. Make sure you are connecting 2.4GHz only.
No audio| • Ensure the audio function on the camera is turned on.
• Ensure audio is turned up on the viewing device.
Human detection not
working| • Ensure you have enabled “Human Detection” in the Device Settings
screen of the Imou LifeApp.
The device cannot work
normally or start?| • Check the LED indicator status. If the light is not in
green, press and hold the reset button for 10 s to reset the camera.
How to connect the
camera to a new Wi-Fi?| • If the camera is offline, reset the camera, and
configure the camera again.
Connection is time?| • Check if the distance between the camera and the
router, the camera, and the smartphone is within 5 m (16.4 ft) during the
connection.
When the Micro SD card
is full, how is the recorded
video saved?| • When the Micro SD card is full, the system will overwrite the
previously recorded videos. Save the important information in time.
The device is offline?| Check the indicator status:
• If the green light is on, check whether the router can connect to the
Internet. If the Internet is working, restartthe camera.
• If the red light flashes, reset the camera, and then configure the camera
again.
• If the red light is on, it means the camera is faulty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>