LIFESPAN FITNESS DT3 Under-Desk Treadmill User Guide
- June 5, 2024
- LIFESPAN FITNESS
Table of Contents
QUICK START
DT3 TREADMILL
DT3 Under-Desk Treadmill
Begin Here
-
Position the treadmill under your desk
Stand on the belt to see if you are close enough to the desk to work and walk. Adjust as needed. -
Attach the Console Cable
After connecting the console cable to the treadmill place the console on the desktop. -
Attach the Power Cord
Connect the power cord to the base of the treadmill and then to a power outlet. -
Turn the Power Switch on
-
Confirm that the Safety Key is securely in place
-
Press and hold the Stop button for 1-3 seconds to reset the console
-
Press Enter
Stand on the side rails of the treadmill. -
Press Start
The treadmill belt will start to move. You can begin walking. -
Adjust the speed with the up and down arrow buttons
-
Press Stop when you are finished
TROUBLESHOOTING
DT3 TREADMILL
| PROBLEM:
The console is erratic or not lighting up.
SOLUTION:
Check to make sure the treadmill is properly plugged in. Turn the power switch
off and make sure
the safety key is in place. Make sure the console wire connector is properly
plugged in. Disconnect the connections between the treadmill and console. Then
plug them back together and turn the power back on. If the problem persists
contact LifeSpan Customer Service.
---|---
| PROBLEM:
“UART” or “ “dc-6” appears in the display.
SOLUTION:
Turn the treadmill power switch off. Unplug and re-plug the console connector
to the treadmill. Turn the treadmill power switch back on and check to see if
it functions properly. Make sure the treadmill is plugged into the wall socket
and not into an extension cord or power strip.
| PROBLEM:
The treadmill motor seems strained or E1 comes up after several minutes of
use.
SOLUTION:
This problem usually occurs when there is too much friction building between
the treadmill belt and deck. The best thing to do is turn the treadmill off,
lubricate the running belt with 100% silicone (non-aerosol), and turn the
treadmill back on. Test the unit. If E1 still comes up after testing, contact
LifeSpan Customer Service.
| PROBLEM:
The treadmill speed feels too fast or too slow.
SOLUTION:
Go into the Personal Settings section and check if you are in Metric or
English mode. If you
are in the correct mode, contact LifeSpan customer service.
Please see the Owner’s Manual section Maintenance and Tips for more information.
Customer Service: 877.654.3837 x 4
lifespanfitness.com
Documents / Resources
|
LIFESPAN FITNESS DT3 Under-Desk
Treadmill
[pdf] User Guide
DT3, Under-Desk Treadmill, DT3 Under-Desk Treadmill
---|---