Genius SP-HF380BT Bluetooth Speakers User Guide
- June 5, 2024
- GENIUS
Table of Contents
Genius SP-HF380BT Bluetooth Speakers User Guide
Bluetooth 5.0 or Line-in
One simple click switch between Bluetooth and Ø3.5mm wired Line-in mode. You
can use this SP-HF380BT speakers to connect music from portable MP3, mobile
phone, ipad, laptop computer, or smart TV.
USB Powered / Plug and Play
Our Bluetooth speakers are powered by USB, to avoid the trouble of charging.
In-line Control
Note:
Bluetooth model need using with power source of DC 5V 1A.
Operation Description
-
The USB power plug of speaker is plugged in.
-
Turn on the power and enter the LINE function by default. The red LED is always on. At this time, the audio cable can be inserted into the audio device to play music. Short press the button on the remote control to increase volume; long press the to increase volume continuously. And short press the button on the remote control to decrease volume; long press the to decrease volume continuously.
-
Short press button on the remote control to enter the Bluetooth status, and the blue and red LEDs will flash alternately. At this time, you can pair the Bluetooth device. After the pairing is successful, there will make a notification sound. The blue LED is always on. At this time, the audio device can play music. Short press button on the remote control to stop playing music, click again to resume playback. Short press on the remote control, increase the volume, press twice consecutively to go to the next track, long press on the remote control to increase the volume, and the speaker sounds louder. Short press on the remote control, the volume decreases, press twice, Go to the previous song, press and hold button on the remote control to decrease the volume, and the speaker sound is reduced.
-
After press button on the remote control to enter the Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode.
-
Pairing: In the Bluetooth status, long press button on the remote control for 3 seconds. When the speaker will make a notification sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue and red LEDs flash alternately. At this time, Bluetooth device pairing can be performed.
-
After power on, short press button on the remote control to enter the Bluetooth mode, short press the button on the remote control to enter the LINE mode.
-
Turn off: Unplug the power supply and the LED is off.
Button Function
Federal Communication Commission(FCC) interference statement: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient / Relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Disclaimer
The following does not apply to any country where such provisions are
inconsistent with local law: KYE Systems Corp. makes no warranties with
respect to this documentation, whether expressed or implied. All material is
provided “as is”. This includes, but is not limited to, any implied warranties
of merchantability and fitness is for a particular purpose. The information
covered in this document is subject to change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies.
The frequency band of product is 2400 MHz – 2483.5 MHz and the radio-frequency transmitted maximum power (equivalent isotropic radiated power, EIRP) less than 10 mW. Operating temperature: 0-40°C Product storage conditions: Temperature: -20°C~ 50°C/ Humidity: 5%~ 85%
Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately. The
following apply only to users in European countries:
-
This product is designated for separate collection at an
appropriate collection point. Do not dispose of as household waste. -
For more information, contact the retailer or the local authorities in charge of waste management.
Genius web : www.geniusnet.com O E M / O D M : www.kyecom.com
KYE Systems Corp.
492, Sec. 5, Chongxin Rd., Sanchong Dist.,
New Taipei City 24160, Taiwan
Tel: 886-2-2995-6645
Fax: 886-2-2995-6649
Email: sim@geniusnet.com.tw
Email: csd@geniusnet.com.tw (Tech. Support)
http://www.geniusnet.com
References
- Genius designs personal peripheral devices with a target to provide a better experience in everyone's lives. Visit Genius to find your devices with high quality, easy usage and effective cost.
- The domain name kyecom.com is for sale
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>