SKIP HOP 304350 Fold-Away Baby Jumper Explore & More Jumpscape Owner’s Manual
- June 5, 2024
- SKIP HOP
Table of Contents
SKIP HOP 304350 Fold-Away Baby Jumper Explore More Jumpscape
LIMITED WARRANTY
At Skip Hop, we take great pride in the quality of the craftsmanship of each and every item we produce. We are committed to providing our customers with best-in-class, high-quality, genuine Skip Hop products through authorized Skip Hop retailers. We stand behind that the following warranties against defects in materials and workmanship. This product is covered by a 2-year Warranty. Warranty is non-transferable and only applies to the original purchaser. All refunds and exchanges are issued at the discretion of Skip Hop. Warranty does not cover:
- Damages caused by normal wear and tear (i.e., hook-and-loop wear, etc.)
- Defects resulting from repair or alteration of the product (except by Skip Hop)
- Defects resulting from improper use, including any use or care not in accordance with the product instructions
- Damages resulting from airlines or airport staff
- Defects resulting from improper storage, such as outdoors or in damp environments
- Products that are re-sold, given away, or in any other case where you are not the first and original owner
- Products without receipt or proof of purchase
- Products purchased outside of North America
- Products that are not purchased through an authorized Skip Hop retailer (online or in-store)
Remedies under this warranty are limited to repair or replacement of the product or components of the product. In no event will Skip Hop or any of its retailers, dealers, distributors or resellers be liable for incidental, indirect or consequential damages relating to the product (including any repaired or replacement product or component) or its use. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you. To get service under this limited warranty: please visit www.skiphop.com, or call 877-4-SKIP HOP (in the US)
WARNING
KEEP INSTRUCTIONS FOR FUTURE USE.
NEVER LEAVE YOUR CHILD UNATTENDED! Always keep the child in view while in
the product.
DO NOT USE THE BABY BOUNCER AS A SWING!
FALL HAZARD!
Stop using this product when the child:
- Can stand flat-footed in the product at the highest adjustment level and can lift themselves out of the seat or starts to climb out.
- begins to walk unassisted.
- Ages: 4m+. Do not use with children over 26.5 lbs (12 kg) or over 30 inches (76 cm). For use only with infants who can hold up their head unaided and can sit up unassisted.
- Never use near stairs, stoves or ovens, fireplaces, heaters, swimming pools, or other dangerous areas.
- To avoid tip over, place the product on a flat, level surface.
- DO NOT adjust the height while the child is sitting in the product.
- Make sure Support Strap Rings are securely fastened before putting a child in the seat. Check to ensure they are secure before each use.
- Make sure Jumper legs are securely locked in position on a flat surface before putting your child in the seat.
- Ensure that the child is correctly and safely positioned in the seat of the baby bouncer.
- Strings can cause strangulation! DO NOT place items with a string around the child’s neck, such as hood
- strings or pacifier cords. DO NOT suspend strings over products or attach strings to toys.
- Be aware of the danger of allowing other children to play near the product.
- Do not let other children swing or climb the fold-away jumper.
- Recommended time limit per use session is 20 minutes.
- Do not use this product if it is damaged or broken. Throw away at the first sign of damage or weakness.
- Only replacement parts supplied by the manufacturer should be used on the product.
- Remove and discard all packaging materials properly before use.
- Read all instructions and warnings before assembly and use of the stationary JumpscapeTM Fold-Away Jumper.
CONTENTS
CLEANING AND CARE
- Plastic Parts: Wipe surfaces with mild soap and water. Air dry.
- Seat Cover: Machine washes cold, gentle cycle. No bleach. Air dry. Do not iron.
- IMPORTANT: Care should be taken in unpacking and assembly. Examine products frequently for damaged, missing, or loose parts.
EN ADULT ASSEMBLY REQUIRED
BASE TUBE/SUPPORT ARM ASSEMBLY
Use only screws and metal bars provided and assemble using a Phillips head screwdriver. DO NOT USE POWER TOOLS!
- Assemble base upside down. Place Base Tubes (2) onto Support Arms.
- Screw Metal Bars into Base Tubes (2) with Phillips head screw driver (not included).
- Flip base right side up. Pull up on Support Arms and click down into base.
TABLETOP ASSEMBLY AND HEIGHT ADJUSTMENT
- Height is adjusted by attaching Strap Support Rings to one of the 5 hook locations under the Tabletop. (1 for the tallest child / 5 for the smallest child.)
- Feed straps through the guide channels to secure.
- IMPORTANT! Make sure to attach to the same number on all rings so they are the same height. ALWAYS remove the baby from Jumper before adjusting the height. Make sure Support Strap Rings are securely fastened before putting a child in the seat. Check to ensure they are secure before each use.
The Baby’s feet should be positioned as shown
SEAT INSTALLATION
INSTALLING TOYS
- Place toy on edge of Tabletop (Clip will be pushed out)
- Push Clip under Tabletop
- Press down on the suction cup
MOVING AND REMOVING TOYS
- Pull-on suction cup tab
- Pull Clip from under Tabletop
- Remove from Tabletop
LIGHT-UP BOUNCE COUNTER OPERATION (requires 3 AAA batteries)
Install/replace batteries (by an adult only)
- Open the battery cover with a screwdriver
- Insert or replace with 3 AAA 1.5V batteries.
- Be sure to insert with the correct polarity.
- Replace the cover and secure screws with screwdriver
At the end of the product life, remove batteries from the product by following the battery replacement instructions. Always dispose of used batteries properly. See section on safety and disposal information. To prolong the life of this product remove batteries when the toy is in storage.
Sun button
Plays 4 different sounds and light effects when the baby presses it.
- Power: On and off
- Sound: Toggle sounds on or off
- Light: Toggle child-facing lights on or off
- History: Press once to view the last bounce
- Count, press again within 5 seconds to view the high count. The count will remain on screen for 5 seconds. Hold down the button for 5 seconds to reset the high score back to zero. Scores will reset when batteries are changed.
Features
- Every 100 bounces will be rewarded with sound and light effects.
- When powered off (or timed out) the Bounce Counter will save sound and light settings for the next session.
- It will also save the count from the last session and the high count.
- Usage reminders will signal after 10 and 20 minutes (recommended use per session is 20 minutes).
- After 30 seconds of inactivity, light and sounds will play to entice baby to move. If no movement after 1 minute, the same sequence will play and the display will go to sleep. Any movement during this time will wake up the unit and the Bounce Counter will keep counting.
- After 30 minutes of inactivity, the unit will auto off. Current bounce count will be saved to history as well as the highest count to date. Press power button to restart.
- The count will max out at 9999. Push on / off to reset to zero.
INSTALLING LIGHT-UP BOUNCE COUNTER ON TOP SURFACE
DISASSEMBLE FOR STORAGE
- Remove all toys
- Disconnect all straps from the Tabletop
- Turn the Tabletop upside down between base tubes.
- To fold the legs: while pressing down on the foot pedal, pull up on the Support Arm and fold toward the center. Repeat on another side.
- Wrap hook-n-loop strap on the bottom of Seat around legs to secure.
