SKIP HOP 186300 Nightlight Soother Owner’s Manual

: May 15, 2024
: SKIP HOP

Table of Contents

CONTENTS
INSTRUCTIONS FOR USE
CLEANING & CARE
FCC INFORMATION
CUSTOMERS SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SKIP HOP 186300 Nightlight Soother

SKIP HOP 186300 Nightlight Soother

Please retain this information for future reference.

INSTRUCTIONS FOR USE

Connect USB cord into Soother. Plug adapter (not included) into wall socket. Plug USB cord into USB power adapter with output 5.0 V DC, 2.0A.

Place Soother in an upright position on a flat level surface, out of children’s reach.

Instructions For Use

To select a sound, press the button of your choice.
To mute sound, press it again.

| “Brahms Lullaby”
---|---
| Eine Kleine Nachtmusik”
| “Rock a Bye Baby”
| “Twinkle Twinkle Little Star”
| Rainforest
| Jungle Crickets
| Waves
| White Noise with Heartbeat

CLEANING & CARE

Unplug before cleaning. Clean with dry cloth only.

WARNING: This is an electric lamp, not a toy.
To avoid risk of fire, burns, electric shock and injury, it should not be played with or placed where small children can reach it. To reduce the risk of electric shock: always unplug the appliance from the electrical outlet immediately after using and before cleaning; do not reach for an appliance that has fallen into water—unplug it immediately; do not place or store appliance where it can fall or be pulled into a tub or sink; do not place in or drop into water or other liquid. To reduce the risk of burns, fire, electric shock or injury to persons: close supervision is necessary when this appliance is used by or near children. Cord may be a strangulation hazard. Keep out of reach of children. Do not use with extension cords. Always use with adult supervision. The product is not to be connected to more than recommended number of power supplies. Do not leave infant unattended with product. Do not place product in crib. Inspect product before each use and discard if damaged or worn. This product is not a toy. The transformer (not included) is not a toy. Do not clean with liquids. For EU market, the product is only to be connected to class II equipment bearing the symbol . For US market, connect the product to a class 2 power supply, switching adapter. The transformer or power supply (not included) used with the product should be regularly examined for potential hazard, such as damage to the cable or cord, plug, enclosure of other parts and that in the event of such damage, the product must not be used until that damage had been properly removed. Indoor dry location use only. Keep away from open windows where rain spray may occur. Please retain for future reference.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT SAFETY INSTRUCTIONS: Ensure USB cord is connected into item first before inserting into power source. User shall only connect to 5V output adapter 5.0 DC, 2.0A. No serviceable or replacement parts inside. Misuse can cause electrical shock. The ventilation should not be impeded by covering the product with items, such as newspapers, tablecloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not use if liquid has entered the product. Inspect entire product frequently and discard at first sign of damage.

CONSUMER INFORMATION: SAFETY AND DISPOSAL Do not dispose of Waste Electrical Electronic Equipment (WEEE) in unsorted municipal waste; collect separately. Dispose of at WEEE collection sites per local regulation. WEEE contains chemicals that are hazardous to the environment and human health. The end-user’s participation is critical to the success of WEEE collection.

| Power Off-Standby Switch. Switch product function off or switch to standby mode. Product may appear to be turned off while in standby mode if no function switch has been activated or product is malfunctioning.
---|---
| Product is for indoor use only
| Direct current only
| Please read all instructions. Rating Label is located on the bottom of the product.
| EU Compliance
| AS/NZS RCM
| Safety isolating transformer for toys.
| USB
| Direct current output from USB connector. + Positive terminal / – Negative terminal
| Direct current power input connector on Soother. The positive connector is internal and the negative connector is exterior.
| The power adapter is a class ii electrical device.
| Dispose of in accordance with local law. Separate collection for WEEE.
Meets and exceeds applicable safety standards.
| Do not dispose of WEEE in trash.

FCC INFORMATION

ICES-003 INFORMATION:
CAN ICES-3 (B)/NMB-3(B):

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.