rega FONO MC MK4 Phono Stage User Manual

: June 5, 2024
: Rega

Table of Contents

rega FONO MC MK4 Phono Stage User Manual
POWERING UP
METHOD OF CONNECTION
SPECIFICATIONS
WEEE COMPLIANCE
WARRANTY
- References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

rega FONO MC MK4 Phono Stage User Manual

rega FONO MC MK4 Phono Stage.jpg

1. INPUT
2. OUTPUT
3. TURNTABLE EARTH
4. AC SOCKET

POWERING UP

The Fono MC is turned on by pressing the on-off button located on the front. When the unit is active the Rega logo will glow RED. WARNING: We advise you to turn the Fono on first followed by the amplifier. This is because the power surge in the Fono could cause an audible power on “thump” which may distress the speakers.

METHOD OF CONNECTION

INPUT: Connect the tonearm leads and earth (if used) to the input socket and to the earth terminal on the back of the Fono.

FIG 1 METHOD OF CONNECTION.JPG

**Input loading DIP switch settings***
(located on rear panel):
LOADING RESISTANCE
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

CAPACITANCE
3 off = 1000pF
3 on = 4300pF

GAIN
4 off = 63.5dB
4 on = 69.5dB

TURNTABLE EARTH: If the turntable or tonearm has a separate signal earth connection, this should be connected to the turntable earth terminal on the back of the unit.

OUTPUT: Connect the output socket of the Fono to the line input on the amplifier.

Please note: If you have an integrated amplifier with built in phono stage, DO
NOT connect the Fono to this input.

SPECIFICATIONS

FIG 2 SPECIFICATIONS.JPG

WEEE COMPLIANCE

This symbol indicates that the electronic equipment bearing it should not be disposed of as general household waste at the end of its life. The equipment should be disposed of at a collection point for waste electrical and electronic equipment in accordance with national legislation and Directive 2012/19/EU.

For more information about how to dispose of your waste electronic equipment, please contact your local authority or retailer where you purchased the product.

In the UK, please return your product to the retailer.

WARRANTY

All Rega products are covered by a lifetime warranty against manufacture defects. This warranty does not cover wear and tear. Any unauthorised modifications or failure to follow the Rega recommended guidelines may invalidate the warranty. If returning goods for inspection to your retailer, the original packaging must be used to preserve the warranty. Damage caused during transport due to incorrect packaging may invalidate your warranty. Replacement packaging is available from any Rega retailer. Your statutory rights are not affected.

IMPORTANT INFORMATION
Use only with the Rega PS1 power supply. Never expose the unit to rain or moisture. Do not open the case covers. There are no user serviceable parts inside.

SPECIFICATIONS (PS1)

FIG 4 SPECIFICATIONS.JPG