EAZYRC DPEZ11807RTR 1/18 Glacier RC Crawler 4WD RC Truck RTR Instruction Manual

: June 5, 2024
: EAZYRC

Table of Contents

EAZYRC DPEZ11807RTR 1/18 Glacier RC Crawler 4WD RC Truck RTR
FUNCTION
Introduction
Setting the Gear Mesh
Charging the Battery
Lithium Polymer (LiPo) Battery Warning
Spare parts list
Declaration of Conformity (DoC)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EAZYRC DPEZ11807RTR 1/18 Glacier RC Crawler 4WD RC Truck RTR

EAZYRC-DPEZ11807RTR-1-18-Glacier-RC-Crawler-4WD-RC-Truck-RTR-
PRODUCT

FUNCTION

Introduction

1:18 GLACIER, new masterpiece from EAZYRC comes to rock you shocking momentum!
Pickup trucks,being the symbol of post-modern US western culture, are born with ruggedness and conquest,from which EAZYRC boldly brought in for the first time to develop a brand new
model-That is 1:18 Glacier.
The Glacier features hard and strong body lines offering a great taste of American vintage, bringing you right back to American 70s at once with a glance of the square-shaped front end. The bold
design renders the characteristics of grandeur and Vividness with the exquisite body head and tail design. Customized license stickers are available for players to decorate the front and rear of this
car model.
Metallic luster has been in full display when electrostatic spray is deployed on the vehicle, making the craftsmanship and visual presentation up to the level of the real car.
The body adopts the typical design of pickup truck, meaning you can access to large space of the bucket carrying different items and opanable bucket rear door panel. Great fun and authentic are
well enhanced no matter for static set-up or dynamic walking.
In terms of frame suspension, the bearing angle of the rear spring suspension is adjusted according to the truck model to achieve a longer and smoother driving journey .
Move your attention to the hood design, as always, EAZYRC provides openable hood and enough engine compartment space for players to DIY based on their interests, such as increasing the
counterweight for better driving posture, or replacing the larger-capacity battery to improve the endurance, etc….
The interior is realistically drawn, the dashboard and steering wheel are restored according to the original scale. Simulation of one seat replica history, all parts are precisely injection molded in one
piece.
Cool lights, simulating the real car light set, including headlights, turn signals and reversing lights.
Newly equipped with newly developed high-performance retro wheels and all-terrain tires, grip is substantially improved.
Glacier storm skin is a comprehensive entertainment and RC remote control model car, to the hand that is to play, to achieve at any time and anywhere as you like climbing, crossing.

Warnings

Always check the radio range of the vehicle prior to operation in order to prevent radio loss or interference.
Operate this product within your ability. If the vehicle is dangerous to retrieve, it’s never worth the risk.
Always turn on the transmitter before connecting the battery on the model. When turning off the model, always
disconnect the battery first, and then turn off the model, always disconnect the battery first, and then turn off the
transmitter. If this order is reversed, the model may become uncontrollable and cause serious damage.
Never allow transmitter batteries to run low as it may cause loss of vehicle control.
Plastics on the vehicle are susceptible to damage or deformation due to extreme heat and cold climate. Do
not store the model near any source of heat such as oven or heater. Store the model indoors, in a
climate-controlled, room temperature environment.
Never shorten the receiver antenna; this may affect the transmitting range of the radio system.

Setting the Gear Mesh

The gear mesh is the clearance between the pinion and spur gears in your vehicle. If the motor or gearing components are replaced,check that the gears are not meshing too tightly as this may cause premature wear.

Charging the Battery

Connect the charger to a USB port then connect the battery to the charger.
When charging.the Green LED is flash, when charged, the Green LED is stable
Do not let the battery charge unattended!
If the battery or charger is hot, disconnect the battery and charger immediately as this may be caused by an internal short-circuit.

Lithium Polymer (LiPo) Battery Warning

Never charge a lithium polymer battery with a charger designed for Nicd, NIMH, or any other type of battery
chemistry.Use ONLY charger designed for LiPo battery.
Do not leave LiPo battery unattended during charging
Do not overcharge the battery.
Always charge LiPo batteries on non-flammable, heat-resistant surfaces.
Always use a LiPo-safe bag or container while charging. Do not allow LiPo cells to overheat at any time.Cells
which reach greater than 140 Fahrenheit(60°C) will usualy become damaged and will catch fire.
Do not charge the LiPo pack while it is still in the model. Never charge or store battery packs in a vehicle.
Do not discharge LiPo; doing so will damage the battery.
Do not expose LiPo cell to water or moisture at any time.
Do not store battery near open flame or heater.
Do not assemble LiPo cells or pre-assembled packs together with other LiPo cells or packs.
Always store LiPo battery in a secure location away from children.
Always remove the LiPo battery if model is involved in any kind of crash.
Carefully inspect the battery and connectors for even the smallest damage.
CAUTION:Cells may become hot after usage.Allow the pack to cool to room temperature prior to recharging
Do not allow the electrolyte to get into eyes or on skin.Wash affected areas immediately if they if they come
into contact with electrolyte.Do not alter or modifv connectors or wires of a LiPo battery pack.
Always inspect the condition of the battery before charging and operating.
Do not short circuit the LiPo battery.
Do not have contact with a leaky/damaged battery directly.
Do not charge battery out of recommended temperature range(0°C-45°C)

Spare parts list

E1070 EAZY GLACIER Hood BLUE
E1067 EAZY SCREW SET
E1071
EAZY GLACIER Front and Rear Light Cup Set
E1023 EAZY 5 wire 9g SERVO
E1072 EAZY GLACIER Hood Mount Set
E1080 EAZY GLACIER Window
E1036 EAZY 1:18 Rear wheel shaft
E1073 EAZY GLACIER Rearview Mirror And Wiper
E1074 EAZY GLACIER Bumper And Side Panel
E1037 EAZY 1:18 Wheel Hex
E1075 EAZY GLACIER Lens
E1038 EAZY 1:18 Rear axle plastic parts
E1076 EAZY GLACIER Body SHELL
E1040 EAZY 1:18 SHOCK PLASTIC PARTS
E1077 EAZY GLACIER CHASSIS
E1041 EAZY Connecting Rod
E1078 EAZY GLACIER HANDLE
E1042 EAZY 1:18 M4 ALLY BALL
E1011 EAZY Teraz Tire 19.2 x 13.5 x 56
E1043 EAZY 1:18 BALL HEAD
E1012 Eight Planets Style Wheels plastic parts
E1044 EAZY 1:18 C HUB PARTS
E1014 EAZY LIPO Battery 2S LIPO 380mAh
E1016 EAZY USB Charger
E1045 EAZY 1:18 FRONT/REAR AXLE parts
E1046 EAZY 1:18 SERVO HORN
E1019 EAZY 050 Motor set
E1081 EAZY GLACIER MIRROR LENS
E1020 EAZY Gear set
E1048 EAZY 1:18 FRONT OUTDRIVE SHAFT
E1079 EAZY Transmission Shaft full set GLACIER version
E1049 EAZY 1:18 Gear Box Plastic Parts

Declaration of Conformity (DoC)

declare under our responsibility that the product

CE

Type of Equipment: Patriot Driving System & 2.4GHz Control System
Brand Name: EAZYRC
Equipment Model: 11807
to which this declaration relates is in conformity with the essential requirements and other relevant requirements of the
RED Directive 2014/53/EU, EMC Directive 2014/30/EU,FCC Indentifier 2AUBx-TX01Z and EU RoHS Directive 201/65/EU.
The product is in conformity with following standards and/or other normative documents:
ETSI EN 301 489-1 V2.2.3 (2019)
EN 61000-3-3:2013
ETSI EN 301 489-17 V3.2.4 (2020-09)
EC/EN62368-1
EN 55032:2015
EN 62368-1:2014+A11:2017
EN 55035:2017
EN 62479:2010
EN 61000-3-2:2014
EN 300 328 v2.2.2:2019-07