BYEASATELLBY

QGGRDE Bluetooth True Wireless Earbuds

Specifications

• BLUETOOTH VERSION: V5.0
• BLUETOOTH CHIPSET: RTL8763B
• OPERATION RANGE: Up to 100, feet/30Meters (Free Space)
• SUPPORT: HFP 1.7, HSP 1.2, A2DP 1.3, AVRDP 1.6, SPP 1.2, PDAP 1.0
• MUSIC PLAYTIME: 6 hours
• CALLING TIME: 8 hours
• CHARGING TIME: 1-2 Hours
• BATTERY CAPACITY: 55mAh
• CASE CAPACITY: 400mAh
• WIDELY COMPATIBLE WITH: iPhone X, XS Max, XR 8 7 6 plus, Android, Samsung Galaxy, HTC, iPad Pro, and any Bluetooth enabled devices

Introduction

True Wireless Bluetooth 5.0 earbuds with Bluetooth 5.0 chips provide more stable Bluetooth communication, smoother transmission, and a smart pairing technique with lower power consumption. They also switch off automatically when placed in a charging case. Next Song Control & Start & Dual Microphone Siri It offers incredibly effective WIFI for greater sound and connection. Both audiphone’s Bluetooth devices have a voice when using the V5.0 in-ear buds with mic. You can turn on/off, answer/refuse calls, pause and play, skip music, activate SIRI, and more with only one button!

IPX5 Waterproof and Long Battery Life The 55mAh lithium polymer battery provides 5-6 hours of superior quality talk/playtime, and the 400 mAh charging bank case provides an additional 24 hours of use when fully charged. Waterproof earphones upgraded to IPX5. Sweat, rain, splashes and even deep water will not harm these well-protected earbuds. Jogging, hiking, gym exercise, sporting, walking, running, climbing, and cycling are all sweatproof activities.

It is Compatible with the wild and lightweight the ultra-lightweight in-ear headphones will not put any strain on your ears. The tiny charger is absolutely pocketable and compact, totally enclosing your earpieces for protection and charging your pair without the use of cables or wires. Most IOS and Android phones and tablets are compatible with the sets.

WHAT’S IN THE BOX

• 1 Pair of Wireless Earphones
• 1 x Charging Cable
• 1 x Earphones Charging Box
• 1 x User Manual, Full-Automatic Pairing
• TWS HI-FI Stereo Sound
• Stereo/Mono Mode and Wide Compatibility
• Bluetooth V5.0
• Ergonomic and waterproof IPX5 design

HOW TO FIX EARPHONES WHEN ONLY ONE SIDE IS WORKING

• Make the earphone cord straight.
• Change out your earphones.
• Clean the jack on your headphones.
• Restart the computer.
• Check the audio settings on your device.
• Examine the earphone wires for any damage.

Frequently Asked Questions

• When your true wireless earphones are fully charged, how do you know?
  Connect the charging cable (included) to the charging connection on the back of the charging case and the other end of the charging cable to a usable USB power source with the earbuds inside. When the power indication light on each earbud turns off, the earbuds are fully charged.

• What’s the deal with only one of my true wireless earphones working?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• How can you simultaneously connect both earbuds?|
  The two Bluetooth headsets must be paired at the same time; otherwise, only one will pair. 1- push both buttons until a blue flashing light appears (don’t stop pressing when alternating blue/red lights appear). 2. Open Bluetooth on your phone and search for tws-k2, then select one of them to pair.

• Why aren’t my earbuds communicating with one another?
  Turn off your device’s Bluetooth option. Remove the earbuds from the casing and they will automatically turn on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: Try it again if it doesn’t work the first time.

• What are the signs that my earbuds are charging?
  If you have AirPods Pro or AirPods (3rd generation), you may check whether your AirPods Pro or AirPods (3rd generation) are charging (amber light) or fully charged by tapping the case while it’s on the charging pad (green light).

• When my earbud case flashes red, what does it mean?
  The Problem. If you notice a red light on your AirPod case, it means your battery is low. While the AirPods are not inside the case, amber or red light on the case indicates that it needs to be charged.

• How can I tell if my earbuds in the case are charging?
  Check the indicator lights on the buds and the case. The case can be charged without the earbuds; when they are inserted, both the earbuds and the case will charge at the same time. Charged in red. Fully charged: green

• Do the earbuds have volume control?
  True wireless earbuds contain touch-sensitive or standard buttons on their housings, whereas ordinary wireless earbuds with two earpieces have integrated volume controls.

• Why doesn’t one of my wireless earbuds work?
  Earbuds that are clean and dry the sound quality of Bluetooth headphones should be good. The sound cannot be played if the Bluetooth headphones are dusty, waxy, or linty, resulting in a situation where one side works and the other does not. So, first and foremost, make sure that your Bluetooth headphones are clean.

• What’s wrong with my right earbud?
  Play some music while keeping your earbuds linked to the smartphone. Internal wires become untangled when twisting, and the problems disappear. Examine your headphone wires thoroughly for any signs of damage. Tangled or severed wires frequently cause problems.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>