VonHaus 2500258 Cordless Garden Pruner User Manual
- June 5, 2024
- vonhaus
Table of Contents
2500258
** Please read all instructions carefully before use and retain them for
future reference.
CAUTION Do not immerse in water.
** Protect your eyes.
Protect your hands.
Please read all instructions carefully before use and retain them for future reference.
INTENDED USE Only operates the power tool/machine for its intended
purpose and within the parameters specified in this manual.
This power tool/machine is for domestic use only. Do not use outdoors or on
wet surfaces.
This power tool/machine is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge
unless supervised or given appropriate instruction concerning the product’s
use by a person responsible for their safety.
GENERAL PRECAUTION Do not allow to be used as a toy. Children should be
supervised to ensure they do not play with the power tool/machine.
If the power tool/machine is not functioning properly, has been dropped,
damaged, left outdoors, or immersed in liquid, do not use it, contact DOMU
Brands Customer Services.
Do not use the power tool/machine if any parts appear to be faulty, missing or
damaged.
Ensure all parts are securely attached before use.
RISK OF PERSONAL INJURY Avoids body contact with earthed or grounded
surfaces such as pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
Prevent unintentional starting. Ensure the switch is in the off position
before connecting to the power source and/ or battery pack, picking up or
carrying the tool. Carrying
power tools with your finger on the switch, or energizing power tools that are
switched on, invite accidents.
Do not operate power tools in explosive atmospheres such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks that may ignite
dust or fumes.
Always wear eye protection. Any power tool can throw foreign objects into your
eyes and cause permanent eye damage. Always wear safety goggles (not glasses)
that comply with ANSI safety standard Z87.1. Everyday glasses have only
impact-resistant lenses.
Do not expose power tools to rain or wet conditions.
Water entering the power tools will increase the risk of electric shock.
Stay alert, watch what you are doing, and use common sense when operating a
power tool/machine. Do not use a power tool/machine while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating a power tool/machine may result in serious personal injury.
Use personal
protective equipment. Always wear eye protection.
Protective equipment such as dust masks, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting.
Ensure the switch is in the off-position before connecting to a power source
and/or battery pack, picking up or carrying the tool.
Carrying a power tool/machine with your finger on the switch or energizing a
power tool/machine that has the switch on invites accidents.
Remove any adjusting key or spanner before turning the power tool/machine on.
A spanner or a key left attached to a rotating part of the power tool/machine
may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool/ machine in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. The use of dust
collection can reduce dust-related hazards.
WORK AREA SAFETY Keep the work area clean and well-lit. Cluttered or dark
areas invite accidents.
Do not operate power tools/machines in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
Power tools/machines create sparks that may ignite dust or fumes.
Keep children and bystanders away while operating a power tool/machine.
Distractions can cause you to lose control.
GENERAL POWER TOOL USE AND CARE Do not force the power tool/machine. Use
the correct power tool/ machine for your application. The correct power tool/
machine will do the job better and safer at the rate for which it was
designed.
Do not use the power tool/machine if the switch does not turn it on and off.
Any power tool/machine that cannot be controlled with the switch is dangerous
and must be
repaired.
Disconnect the plug from the power source and/or the battery pack from the
power tool/machine before making any adjustments, changing accessories, or
storing power
tool/machine tools. Such preventive safety measures reduce the risk of
starting the power tool/machine accidentally.
Store idle power tool/machine out of the reach of children and do not allow
persons unfamiliar with the power tool/ machine or these instructions to
operate the power tool/
machine.
Power tool/machines are dangerous in the hands of untrained users.
Maintain power tool/machines. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power
tool/machines
operation. If damaged, have the power tool/machines repaired before use. Many
accidents are caused by poorly maintained power tool/machines.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool/machine accessories and tool bits in accordance with these
instructions, take into account the working conditions and the work to be
performed.
Use of the power tool/machine for operations different from those intended
could result in a hazardous situation.
CLEANING & MAINTENANCE Never soak or immerse electrical components and or
a component that has a plug attached.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Ensure the motor has fully stopped before cleaning, clearing a blockage,
checking, or carrying out any maintenance on the tool.
Maintain your power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
If damaged, have the power tool repaired by a qualified repair person before
use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Regularly check external nuts and fixings to ensure vibration caused by normal
use has not begun to loosen them.
Store idle power tools out of reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the
Breaker.
Locate the power tool out of reach of children, in a dry, locked unit.
Make sure that the cord is located so that it will not be stepped on, tripped
over, or otherwise subjected to damage or stress.
Remove the plug from the main socket/battery (where applicable) before
carrying out any adjustment or maintenance.
Always store the power tool/machine in a dry place.
If the power cord is damaged, it must be replaced by a qualified service
technician.
Keep the ventilation slots and motor housing as free of dirt and dust as
possible (where applicable).
Clean the power tool/machine by rubbing it with a clean cloth and blow it
clean using low-pressure compressed air is recommended.
Ensure you have all the pieces listed. If you are missing any components,
contact our customer services
department at hello@domu.co.uk (UK/EU) or usasuport@ domubrands.com (US). DO NOT proceed with assembly if any components are missing.
HAND-HELD ROUTERS & TRIMMERS
Hold the power tool by insulated gripping surfaces when performing an
operation where the cutting accessory may contact hidden wiring or its own
cord. A cutting accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an electric shock.
Keep hands away from the cutting area. Never reach underneath a workpiece for
any reason.
Do not insert fingers or thumb into the vicinity of the accessory/ sanding
attachments. Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed. Do not overreach. Keep proper footing and
balance at all times. This will enable better
control of the power tool in unexpected situations. Disconnect the plug from
the power source before making any adjustments, changing accessories or
storing. Such
preventative safety measures reduce the risk of starting the power tool
accidentally.
The accessory will continue to move after releasing the switch.
Always switch the tool off and wait for the accessory to come to a complete standstill before putting the tool down.
Do not touch the workpiece or the accessory
immediately after operating the tool. They can become very hot.
TECHNICAL SPECIFICATION
Rated Voltage: 7.2V d.c.
Rated Power: 1500 mAh
Charger Input: 100-240V AC ~50/60Hz
Charger Output: 9V DC 400mAh
COMPONENT LIST
- Cutting Blade.
- Fixed Blade.
- Blade Screw.
- ON/OFF Trigger.
- Safety Button.
- Battery Socket.
- Battery.
- Indicator Light.
- Charging Port.
- Battery Charger (not pictured).
- Blade Sheath (not pictured).
COMPONENTS
BATTERY
OPERATION
MAINTENANCE
WARNING! Take care not to operate the switches when carrying out maintenance.
Always remove the BATTERY from the BATTERY SOCKET when doing so.
IMPORTANT: Always ensure the CUTTING BLADE is secure before use. Use an
appropriately sized spanner to check and retighten the Blade Bolt.
CAUTION: Always wear protective gloves when using, adjusting or cleaning the
tool.
Always lubricate the CUTTING BLADE with a protective spray before storing.
DISPOSAL INFORMATION Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE If you are having difficulty using this product and require support, please contact hello@domu.co.uk (UK/EU) or usasupport@domubrands.com (US)
WARRANTY To register your product and find out if you qualify for a free
extended warranty please go to
www.vonhaus.com/warranty. Please retain a
proof of purchase
receipt or statement as proof of the purchase date. The warranty only applies
if the product is used solely in the manner indicated in the warnings page of
this manual, and all other instructions have been followed accurately. Any
abuse of the product or the manner in which it is used will invalidate the
warranty. Returned goods will not be accepted unless re-packaged in its
original packaging and accompanied by a relevant and completed returns form.
This does not affect your statutory rights. No rights are given under this
warranty to a person acquiring the appliance second-hand or for commercial or
communal use.
COPYRIGHT All material in this instruction manual is copyrighted by DOMU Brands. Any unauthorized use may violate worldwide copyright, trademark, and other laws.
THANK YOU
Thank you for purchasing your product/appliance.
Should you require further assistance with your purchase, you can contact us
athello@domu.co.uk (UK/EU) or
usasupport@domubrands.com (US)
VonHaus is a registered trademark of DOMU Brands
Ltd. Made in China for DOMU Brands. M24 2RW.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>