FK Irons Spektra Flux Cartridge Machine User Manual
- June 5, 2024
- FK Irons
Table of Contents
Cartridge Machine
User Manual
SAFETY NOTICE
CLASS III SYMBOL
A Class III appliance is designed to be supplied from a separated/safety
extra-low voltage (SELV) power source. The voltage from a SELV supply is low
enough that under normal conditions a person can safely come into contact with
it, without risk of electrical shock. The extra safety features built into
Class I and Class II appliances are therefore not required. For medical
devices, compliance with Class III is not considered sufficient protection,
and further more-stringent regulations apply to such equipment.
TECHNICAL DATA
Operating Voltage:| 5 – 12 V DC
Current:| .3 A
Stitch Frequency:| 25 -160 Hz
Stroke:| 4 mm
Connection:| USB-C
Drive:| Brushless 9 Watt motor
Operating Mode:| Continuous operation
Ambient Temperature:| +10 to +35 °C
Relative Humidity:| 30 to 75%
Dimensions (Ø X L):| 35 x 125 mm
Weight:| Approx. 180 g
BARRIER PROTECTING YOUR MACHINE
Although the grip is autoclavable, we strongly suggest the use of barrier
products to protect your machine. For a visual demonstration of many barrier
protection methods, please visit our YouTube channel, FK Irons.
“This machine is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge”
MACHINE OVERVIEW
THE SPEKTRA FLUX
Unleash your Power
The first wireless pen-style machine features detachable batteries, complete
Bluetooth connectivity, and a whole new sense of freedom.
THE GRIP
The Flux grip allows artists ratcheting control over needle depth. The standard Grip has a diameter of 33mm. Other grip options will be available soon. The Grip is crafted from a solid rod of 6061 T6 aircraft-grade aluminum. This polished and anodized grip is safe to be sterilized under steam, in an autoclave, or sprayed with cold sanitation solutions.
THE BODY
The Body is the core of the machine. Constructed from a solid rod of 6061 T6
aircraft-grade aluminum, this module should be sanitized by wiping it with
cold sterilization solutions only.
Caution: Avoid getting fluids into the housing
THE POWERBOLT
LED indicator:
Solid Color = Whole Value
Blinking Color = Half Increment
Ex. Solid green indicates 10V
Flashing green indicates 10.5V
Battery Level Check: Press and hold the power button till white. A
blinking colored light indicates the remaining charge. Note: LED flashes while battery charges. Once < 15%
is reached, the red light will blink alternately with voltage.
Working with modes: Modes work by pressing and releasing the power
button.
Bluetooth – Hold the power button until a blue light appears and
immediately release the power button. A blue blinking light indicates pairing
mode is available for 60 seconds. To deactivate Bluetooth, hold the power
button and release it when the yellow light flashes.
Travel Mode (Shutdown) – Press and hold the power button until the red
light flashes. This mode is for when you want to avoid unnecessary discharge
and/or comply with travel laws. To reactivate, connect/disconnect to a USB-C
port. Reset (Factory Settings) –
Should you experience abnormal behavior, hold the power button and the voltage
up button at the same time, then quickly release.
DETACHING THE POWERBOLT
To detach your PowerBolt, ensure you have a firm grip on the Body and Grip.
Turn the PowerBolt counterclockwise and pull out.
To attach the PowerBolt, push in while twisting clockwise. Ensure the lock
mechanism moves freely. PowerBolt must sit correctly to ensure power leads
align correctly. Avoid contact with the PowerBolt leads while recharging or
servicing.
USB-C CONNECTION
This connecting terminal is compatible with most USB-C cables on the market. We recommend you use the included cable for recharging the PowerBolt.
CONNECTING YOUR MACHINE
HOW TO CONNECT YOUR MACHINE
Insert the provided USB-C cable into the back of the PowerBolt and connect
to a Hover or power socket. Make sure the cable is properly seated and is
fully inserted into PowerBolt. The PowerBolt is not meant to operate while
plugged in. The USB-C connection is meant only for recharging your PowerBolt.
PowerBolt can be recharged whether or not it is connected to the Flux. If
connecting to a Hover, the charge speed will be up to 1.5 A.
ADJUSTING NEEDLE DEPTH
To adjust needle depth, hold the machine body and PowerBolt while turning the
Grip. A counter-clockwise turn decreases depth, while a clockwise turn
increases depth (also known as needle hang).
Each time you turn the grip you can feel the tactile feedback of the
ratcheting mechanism. Each “click” displaces your needle 0.2mm and allows you
to set your needle precisely without involuntarily turning while tattooing.
**E-GIVE
**
E-GIVE ADJUSTMENT
With this feature, you’ll be able to control the amount of “give” or
resistance of the needle upon impact with the skin. This enables the artist to
take advantage of the softness or hardness of the hit to achieve specific
results. 0 no effect, 5 maximum amount of E-give.
ADDITIONAL INFORMATION
VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, this
machine has been tested to operate at a minimum voltage of 5 Volts and a
maximum voltage of 12 Volts.
Depending on the type of needle configuration or brand you use, feel free to
adjust the voltage to obtain the desired performance.
ACCEPTED NEEDLES
Use only cartridge needles with an internal membrane. This will avoid
accidental contamination inside your machine. Fluids such as ink, water, or
oil will void the warranty of the device and may require the replacement of
internal parts.
MAINTENANCE
- Flux is sold pre-lubricated from the factory and does not require internal lubrication.
- Prevent any type of external elements from entering inside the machine as they will disrupt the motion of the component and contaminate lubrication.
- The grip of the machine is autoclavable. Use only steam autoclaves at temperatures no higher than 270° Fahrenheit or 132.222° Celsius. Add a hint of ointment or PTFE grease around the internal opening of the grip or on stabilizing friction O-rings for optimal functionality after autoclaving. Refer to page 5 for additional information.
- Machine Body and PowerBolt can be sanitized from the outside with cold sterilization products.
- Never spray the surface directly to prevent fluids from entering the machine. Always use pads or disposable paper towels to apply sterilization products.
- DO NOT DISASSEMBLE THE MACHINE.
WA RRANTY
- All the housing components (Grip, Machine Body, and PowerBolt) are covered by a lifetime warranty.
- Internal parts are subject to wear and the motor itself will be covered by a 1-year warranty from the date of purchase.
- Motor warranty is void if the motor shows signs of being dropped, of internal fluids entering the motor, and/or IF the motor shows signs of being tampered with in any way.
HANDY TIPS
The following tips will help you get the most out of your Spektra Flux and
avoid potential issues:
- Always secure your machine. Dropping the machine can cause damage to the magnets, bearings, and brushes of the motor.
- Use only cartridges with membranes to avoid contamination.
- Rinse your needle frequently to avoid pigment drying up and slowing down your cartridges. When rinsing your needle, ensure to dip only the tip of the cartridge to avoid backflow of fluids.
- Inspect your needles prior to use.
- Avoid scratching the surface of the embodiments.
- Use only FDA-approved cold sterilization solutions for disinfection.
- Do not lubricate the machine unless instructed otherwise.
- Store your machine in a secure place.
- Before first use, charge the battery for a minimum of 3 hours.
TROUBLESHOOTING
-
Machine manufacturer
FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126 -
Servicing your machine
Just like any mechanical device subject to use, FK Irons strongly suggests that you service your product at least once a year to ensure that a proper diagnosis of all working parts is conducted. This ensures the optimal condition of all working parts including internal machine clean up and fresh lubrication. Routine servicing will ensure that your machine remains functioning from the very first day. Service is subject to fees. -
Warning
Disconnect the machine from any power before making any adjustments.
For service inquiries, please
contactservice@fkirons.com.
For additional tips and tutorials, please
visit:Youtube.com/fkirons
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>