FK Irons ONE Wireless Tattoo Machine User Manual

and Wireless for All

USER MANUAL

SAFETY NOTICE

CLASS III SYMBOL
A Class III appliance is designed to be supplied from a separate/safety extra- low voltage (SELV) power source. The voltage from a SELV supply is low enough that, under normal conditions, a person can safely come into contact, without the risk of electrical shock. The extra safety features built into Class I and Class II appliances are, therefore, not required. For medical devices, compliance with Class III is not considered sufficient protection, and further, more-stringent regulations apply to such equipment.

TECHNICAL DATA

BARRIER PROTECTING YOUR MACHINE
We strongly suggest the use of barrier products to protect your machine. For a visual demonstration of barrier protection methods, please visit our FK Irons YouTube channel.

This device is only for use by trained tattoo artists and not for use by children or persons of reduced physical, sensory or mental capabilities.

ONE INTRO

FK ONE
Premium quality. Sophisticatedly simple.

OVERVIEW

SPECIFICATIONS

• Output Voltage: 5-12V
• Increment/decrement voltage interval: 0.5V*
• Maximum output current: 1A
• Charger Input: USB-C
• Size: H 124mm x W 36.7mm
• Weight: Without battery 195g (6.87oz) with battey 227g (8.00oz)
• Battery Life: ~ 6-10 Hours (based on operating parameters)

OPERATION

Bluetooth connection for an update for FK ONE:

1. Press UP+CENTER buttons simultaneously to activate the Bluetooth, where the LED will turn DARK BLUE to indicate that the Bluetooth turned on.
2. Use DarkLab application to Update FK ONE.
3. After the update is completed, the Bluetooth is disconnected by DEFAULT.

OPERATING THE ONE
Voltage Selection: Using the Voltage up and Voltage down buttons you can cycle through the diffrent setting. A solid color equals a whole value (Ex. Solid green indicates 10V). Blinking color is a half increment (Ex. Flashing green indicates 10.5V).Use the power button to start and stop the machine.

REMOVING THE BATTERY

Twist clockwise to close/activate battery.

Twist counter-clockwise to open. Push down & keep twisting counter-clockwise to deactivate battery. NOTE: Cap is shipped in the OFF position.

CHANGING THE BATTERY
The ONE is compatible with the Panasonic NCR 18500A Flat-Top Battery. To detach the cap, ensure you have a firm grip on the body of the ONE and Grip. Turn the cap counter- clockwise and pull away. Slide the battery out of the battery housing. To replace battery, slide new battery into housing. Battery must sit correctly to ensure power electric leads  align correctly. Avoid contact with the ONE power leads while changing battery.
Turn power off before removing battery from machine.

CHARGING YOUR BATTERY

HOW TO CHARGE YOUR BATTERY

First, plug the Fest Slim K2 charger into a wall outlet using the included power adapter. Next, insert the Panasonic 18500A battery into one of the charging bays on the eFest Slim K2 charger. Be sure to insert the battery with the positive (+) end facing up, and the negative (-) end facing down. The Fest Slim K2 charger will automatically detect the type of battery you have inserted and display the battery life on the screen. Once the battery is fully charged, the eFest Slim K2 charger will automatically stop charging and
display a message indicating that the charging process is complete.
You can then remove the battery from the charger and use it as needed.

ADJUSTING NEEDLE DEPTH

To adjust needle depth, hold the machine body while turning the Grip. A counter-clockwise turn decreases depth, while a clockwise turn increases depth (also known as needle hang). Each time you turn the grip you can feel the tactile feedback of the ratcheting mechanism. Each “click” displaces your needle 0.2 mm and allows you to set your needle precisely without involuntarily turning while tattooing.

ADDITIONAL INFORMATION

VOLTAGE PARAMETERS
While voltage is a parameter that will vary from artist to artist, the ONE has been tested to operate at a minimum voltage of 5 Volts to a maximum voltage of 12 Volts.
Depending on the type of needle configuration, or brand you use, feel free to adjust the voltage to obtain the desired performance.
WARRANTY
Darkle warrants that the device will perform efficiently when used as intended. Should this product prove to be defective due to manufacturing issues, Darkle will repair/replace the device free of charge.
This warranty will be void if the device shows signs of having been tampered, disassembled, handled roughly, dropped, overexposed to moisture or damage resulting in compromised functionality.
HANDY TIPS
The following tips will help you get the most out of your ONE and avoid potential issues:

• Do not exceed the suggested voltage
• Use only FDA-approved cold sterilization solutions for disinfection
• NOT AUTOCLAVABLE

TROUBLESHOOTING

1. Machine Manufacturer
   FK Irons: 1771 NW 79th Avenue, Doral, Florida 33126

2. Servicing Your Machine
   As for any mechanical device, FK Irons strongly suggests that you service your device once a year to ensure all working parts are working as expected. This ensures the optimal condition of all working parts, including internal machine clean up and fresh lubrication. Routine servicing will ensure that your machine remains functioning as intended. Service is subject to fees.

3. Warning
   Disconnect machine from any power source before making any adjustments.

For service inquiries, please contact service@FKirons.com.
For additional tips and tutorials, please visit Youtube.com/Fron

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>