Shenzhen Aiwenyu Tech FS21HS-L 120W TV Soundbar with Subwoofer Instruction Manual
- June 5, 2024
- Shenzhen Aiwenyu Tech
Table of Contents
Shenzhen Aiwenyu Tech FS21HS-L 120W TV Soundbar with Subwoofer
Troubleshooting
-
Q) No sound comes out after connected to TV using ARC/ Optical (Common):
- Please make sure your TV support ARC output. Then go to Setting in your TV setting (may vary due to different brand):
- Setting > Sound > Select Speaker to：external speaker (optical mode)/ turn off TV Speaker
- Setting > Sound(audio) > advanced Audio > digital audio output > PCM Setting > Sound(audio) > audio output format > PCM/ Dolby off
- Please select the correct input mode.
-
Q) Why watching Netflix, Disney+, Amazon prime has no sound or noise, some shows have sound o n Smart TV?
- If your TV is a smart TV. Apps like Netflix was set default audio output is Dolby and DTS for the movie, but this sound bar did no support Dolby and DTS, so you will hear the crack sound or no sound, please kindly disable the Dolby and DTS on Netflix. Please read back last page under Smart TV set up.
-
Q) Why won’t my Bluetooth device connect to the sound bar?
- You have not enabled the Bluetooth feature on your device or the sound bar.
- The sound bar is connected to another Bluetooth device if LED display not flashing. Disconnect the connected device and try again.
- Long Press the “pair” button on the remote, and restart the sound bar.
-
Q) Can I use a universal remote?
Yes, please make sure to follow your universal remote step to set up. We have provided our remote code on previous pages (02FD). Only support universal remote with learning function with 4-digit coding. And we HIGHLY recommend you use our included remote for the best compatibility. -
Q) Is this compatible with Fire TV/ Firestick?
Yes, Plug the Fire TV to the TV. And connect the TV using any input mode. If using Optical or ARC. Please make sure you follow our manual setting. -
Q) Remote not working.
- Double check if the batteries are correctly installed in the battery slot.
- Replace two brand new AAA batteries.
- Point the remote to the center of the sound bar (IR is built in the front of the box.)
If the issue still exists after you did the above steps, please send an email to us: help@vmaitech.com with your Amazon order ID, we will provide you with free replacement.
-
Q) Why the battery is not included?
The battery is not included due to Amazon Safety Regulation. We apologize for the inconvenience. -
Q) How do you mount it on the wall?
For mounting our sound bar on the wall is very simple. Please find the mounting screw kit within our
package. And simply measure and screw them on the wall. Finally, attach the back of the sound bar
to the mounted screw. -
IMPORTANT: If you need any assistance, feel free to email us at help@vmaitech.com to provide youwith more direct help! Here at Vmai, we truly value customer satisfaction!
Thank you for purchasing the VMAI Soundbar. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team: help@vmaitech.com with your product model number and Amazon order number.
Warning
Caution:
- To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only
- The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons
- Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.
Notice:
This appliance is not intended for use by person (including children) with
reduced physical sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
- To prevent possible hearing damage, do not listen at high volume levels for long time periods or a sudden high volume level.
- Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
- The appliance is not intended to be operated by means of an external timer or separate remote control system.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
- Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
- The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
- The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on the apparatus.
- To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust.
- Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unit on a dry, stable surface.
- Do not place this unit close to a strong magnetic field.
- Do not place the unit on a amplifier or receiver.
- Do not place this unit in a damp area as the moisture will affect the life of electric components.
- Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
- When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
- Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit well away from the TV set.
- The mains plug is used to disconnect the device, the disconnected device should remain readily operable.
Important Safety Instructions
-
Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus
(including amplifiers) that produce heat. -
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles or at the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The AC plug is used to disconnect the device, the disconnected device should remain readily operable. In order to disconnect the apparatus from the AC power completely, the AC plug must be removed from the AC outlet completely.
Preparation for Use
Unpacking and Set Up
- Remove the Sound bar from the carton and remove all packing material from the Sound bar. Save the packing material, if possible, in case the Sound bar ever needs to be serviced or transported. The original carton and packing material is the only safe way to pack your Sound bar to protect it from damage in transit.
- Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet.
- Place your Sound bar on a level surface such as a table, desk or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or vibration.
- Unwind the Line cord connecting the AC adapter and extend it to its full length.
Protect Your Furniture
This model is equipped with non-skid rubber ‘feet’ to prevent the product from
moving when you operate the controls. These ‘feet’ are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on
your furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and
leave marks or a rubber residue on the furniture. To prevent any damage to
your furniture we strongly recommend that you purchase small self-adhesive
felt pads, available at hardware stores and home improvement center
everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you
place the unit.
Power Source
This sound bar is designed to operate on normal AC power source. For North
America, it works only under SMPS 110V-240V～50hz/60Hz. Do not attempt to
operate the Sound bar on any other power source. You could cause damage to the
Sound bar that is not covered by your warranty.
Important Notes
-
This sound bar was especially developed for LED/LCD/Plasma TV’s: It should not be used in combination with CRTTV’s (Cathode Ray Tube TV’s) in order to avoid image interference.
-
Safety and operating instruction manual should be retained for future reference.
-
The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom.
-
Do not install the product in the following areas:
- Places exposed to direct sunlight or close to radiators.
- On top of other stereo equipment that radiate too much heat -Blocking ventilation or in a dusty area.
- Areas where there is constant vibration.
- Humid or moist places.
- Near candles or other flames.
-
Operate the product only as instructed in this manual.
-
Before turning on the power for the first time, make sure the sound bar is plugged to power outlet.
-
For safety reasons, do not remove any covers or attempt to gain access to the inside of the
product. Refer any servicing to qualified personnel. -
Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.
Soundbar Control Connection
Back view
Side view
SUBWOOFER VIEW
Documents / Resources
|
Shenzhen Aiwenyu Tech FS21HS-L 120W TV Soundbar with
Subwoofer
[pdf] Instruction Manual
FS21HS-L, FS21HSL, 2A5VSFS21HS-L, 2A5VSFS21HSL, FS21HS-L 120W TV Soundbar with
Subwoofer, 120W TV Soundbar with Subwoofer
---|---