SONOS 616ONESLB One SL Wireless Streaming Amplifier User Guide

June 9, 2024
Sonos

SONOS-logo

SONOS 616ONESLB One SL Wireless Streaming Amplifier

Download the Sonos app

You’ll use it to set up and control your One SL.

SONOS 616ONESLB One SL Wireless Streaming Amplifier-
fig2

Use the Sonos app to set up One SL

We’ll tell you when to plug things in.

SONOS 616ONESLB One SL Wireless Streaming Amplifier-
fig3

Fill your home with sound

Play and control the audio from any of your music services using the Sones app, or the touch controls on your One SL.

SONOS 616ONESLB One SL Wireless Streaming Amplifier-
fig4

Need help?

SONos·
© 2019 Sonos Inc. All rights reserved.
Sonos, One SL and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. Sanos Reg. U.S. Pat & TM Off.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries.

Important Product Information

For additional information: www.sonos.com/guides

Regulatory Information

CANADA
The installer of this radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. As mentioned before, the installer cannot control the antenna orientation. However, they could place the complete product in a way that causes the problem mentioned above.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

RF Exposure Requirements
To comply with FCC and Industry Canada exposure essential requirements, a minimum separation distance of 20cm (8 inches) is required between the equipment and the body of the user or nearby persons.

Important Safety Information

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sanos components.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
  9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  10.  Only use attachments/accessories specified by the manufacturer.
  11. Unplug this apparatus during lightning storms or when unused for long periods of time.
  12.  Refer all servicing to Sanos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  13.  The Mains plug should be readily available to disconnect the equipment.
  14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
  15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals