KLARSTEIN 10034022 SHIRTBUTLER DELUXE Shirt and Trouser Dryer Instruction Manual

KLARSTEIN 10034022 SHIRTBUTLER DELUXE Shirt and Trouser Dryer Instruction Manual

Dear Customer,

Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

• QR Code :
  

TECHNICAL DATA

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

SAFETY INSTRUCTIONS

• Keep the appliance away from water and fire. Place it on a level, stable surface in a well-ventilated place.

• Only wipe the appliance with a soft cloth and do not clean it with water.

• Use the appliance to dry spun laundry only, not wet laundry that is still dripping.
  CAUTION
  Risk of burns! Never touch the surface of the dryer during use to avoid burns.

• The maximum load is 10 kg.

• Children from 8 years of age, mentally, sensory and physically impaired persons may only use the appliance if they have been thoroughly familiarised with the functions and safety precautions by a supervisor responsible for them and understand the associated risks.

• Ensure that children do not play with the device.

• Children over the age of 8 are only allowed to clean the device under supervision.

• Never cover the air inlet or outlet.

• Unplug the appliance from the wall outlet before assembly. If the power cord or plug is damaged, it must be replaced by the manufacturer, an
  authorized service center, or a similarly qualified person.

• This equipment is intended for drying textiles such as blouses and shirts. Sensitive textiles such as wool or similar materials must not be dried with this device.

• The appliance is not intended for commercial use, but only for household and
  similar environments. This includes kitchens in offices, farms, hotels, motels and facilities offering Bed & Breakfasts.
  Note: This appliance is intended for drying washed textiles only.

PRODUCT OVERVIEW

1. Motor
2. Timer
3. Fixing points
4. Mounting base
5. Outlet
6. Lower bar
7. Connector
8. Telescopic rod
9. Screw (height adjustment)
10. Hanger
11. Clamps
12. Clamps with elastic cord
13. Shirt airbag
14. Trouser airbag

Components

Designation| Stk.|
---|---|---
Motor| 1
Lower bar| 2
Telescopic rod| 2
Hanger| 1
Clamps| 4
Clamps with elastic cord| 4
Shirt airbag| 1
Trouser airbag| 1

ASSEMBLY

1. Pull the mains plug out of the back of motor unit
   
   Drying Shirts

2. Install the two lower rods into the corresponding holes of the motor unit. Insert the two telescopic rods with lower rods. Set the height you want. To do this, open the screw, pull out the telescopic rod and then close the screw again. Place the hanger with 4 clips onto the telescopic rods.

3. Put on the shirts air bag, and pull the elastic cord at the bottom over the mounting flange.

4. Wear the garments on the shirts air bag and turn on the motor

5. Connect the clips with elastic cord on the fixed points of motor unit. Stretch the clips along the bottom of the garment to make it smoother
   
   Drying Trousers

6. Install the two lower rods into the corresponding holes of the motor unit. Insert the two telescopic rods with lower rods. Set the height you want. To do this, open the screw, pull out the telescopic rod and then close the screw again.

7. Put on the pants air bag; pull the elastic cord at the bottom over the mounting flange.

8. Wear the pants on the pants air bag and turn on the motor.
   

Using the Timer

1. Insert the power plug into power socket.
2. Turn the timer knob clockwise until the machine starts to work, the power indicator will illuminate.
3. Rotate the knob to preset the timer. When the set time elapses, the device switches off automatically. The drying/pressing process can be interrupted at any time by turning the timer to the starting position.

TROUBLESHOOTING

• Is the mains plug inserted in the plug socket correctly? Correct the fit of the mains plug.
• Is the plug socket defective? Try another plug socket.
• Check the fuse of the mains connection.
• Is the device switched on? Set the timer to a time.

Unusual noises.| Are the wind outlet covered up or blocked? Free up the outlet vent.
The unit goes out suddenly.|

• Are the wind outlet covered up or blocked? Free up the outlet vent.
• The device has an automatic safety switch-off function. It switches off automatically if it overheats. Allow the device to cool down and switch it on again.

Odour.| You might notice a slight odour caused by production residues the first time you use the device. However, this is harmless and will cease as you use the device.

HINTS ON DISPOSAL

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>