KLARSTEIN 10034573 Hot Plate User Manual

: June 5, 2024
: Klarstein

Table of Contents

KLARSTEIN 10034573 Hot Plate
CONTENT
TECHNICAL DATA
SAFETY INSTRUCTIONS
INSTALLATION
COMMISSIONING AND OPERATION
CLEANING AND CARE
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10034573 Hot Plate

KLARSTEIN-10034573-Hot-Plate-
PRODUCT

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

CONTENT

Safety Instructions 10 Installation 11
Commissioning and Operation 12 Cleaning and Care 12
Hints on Disposal 13 Manufacturer & Importer (UK) 13

TECHNICAL DATA

Artikelnummer	10034573, 10034574
Stromversorgung	220-240 V ~ 50/60 Hz
Leistung	1900-2259 W
Platten-Durchmesser	180/150 mm

SAFETY INSTRUCTIONS

Make sure that the voltage indicated on the nameplate corresponds to the voltage of the socket.
Never leave the unit unattended during use.
The appliance is not a toy. Do not allow children to play with the appliance.
This device may be used by children 8 years of age and older and by persons with limited physical, sensory or mental abilities and/or lack of experience and knowledge if they have been instructed in the safe use of the device by a person responsible for them and understand the dangers involved.
The cleaning and maintenance of the device may only be carried out by children aged 8 years and over if they are supervised to do so.
Make sure that the unit and its power cord are out of the reach of children under the age of 8.
Check the power cord regularly for damage. Never use the unit if the power cord or the unit itself is damaged.
Only use the product in a household and for its intended purpose.
Never immerse the appliance in water or other liquids. Never place the appliance in the dishwasher.
Never use the appliance near hot surfaces.
If the power cord is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person.
Always unplug the appliance before cleaning.
All repairs should be carried out by a qualified electrician.
Never use the unit in combination with an external timer or remote control.
Never use the unit outdoors or in a dry environment.
Use only accessories recommended by the manufacturer as this may result in hazards to the user and damage to the unit.
Never pull the power cord. Make sure that the power cord does not get caught anywhere. Do not wrap the power cord around the product or bend it.
Place the product on a table or a flat surface.
Make sure the product has cooled down before cleaning or storing.
Make sure that the power cord never comes into contact with the hot parts of the appliance.
When in use, never allow the product to come into contact with flammable materials such as curtains, clothing, etc., as this may result in a fire hazard.
Use extreme caution when using this product, as overheated oil, for example, can cause a fire.
Make sure that you observe the minimum distances specified in the operating instructions when using the appliance under an extractor hood. It is advisable to double these minimum distances.
Use the appliance only for food preparation.
Immediately unplug the appliance from the wall outlet if it is damaged and contact your service representative or electrician.
The surfaces of the appliance become very hot during use.
The appliance is not intended for commercial use, but only for domestic and similar environments. This includes kitchens in offices, farms, hotels, motels and facilities offering Bed & Breakfasts.
Never let children play with packaging materials (such as plastic bags).
Please remove pans and pots when lifting the hotplate with the handles.

Note: The unit should not be used for more than one hour at a time.

INSTALLATION

Before using the hotplates, remove all packing materials first.
Install the handles before use.

COMMISSIONING AND OPERATION

Make sure all controls are in the „Off“ position („MIN“ pointing up). Plug the power plug of the unit into the wall outlet.
The invisible protective layer on the unit must be removed before use. To do this, set the maximum level and leave the unit switched on for about 4 minutes. Ensure that the room is well ventilated as this will produce smoke. Switch the unit off and allow it to cool down completely. The unit is ready for use.
Only use pans and pots with a flat surface that allows good contact with the hotplate. Ideally, the size of the bottom of the pot should match the size of the hotplate.
Adjust the temperature. The hotplates have different levels. Use the lower steps (MIN 4) for cooking and gentle heating and use the upper steps (5 MAX) for cooking.
When the appliance is switched off, residual heat remains. This can be used to keep food warm for a short time.
After use, turn the switch to „MIN“ and unplug the appliance.

CLEANING AND CARE

Before cleaning, unplug the appliance from the wall outlet and allow it to cool down.
Rub the hot plates with a damp cloth.
Do not use scouring pads or steel wool as this may damage the surface of the appliance.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.