Klarstein 10032590 Bormio Electric Fireplace User Manual

BORMIO
Fireplace Heater

10032590
10034249
10035071
**10035072

**

www.klarstein.com

Note: This product is only suitable for well-insulated spaces or occasional use.

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10035072

TECHNICAL DATA

PRODUCT DATA SHEET

heaters only
Nominal heat output| P nom | 1.8| kW| | manual heat charge control, with integrated thermostat| N/A
Minimum heat output (indicative)| P min| 0| kW| | manual heat charge control with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| P max,c| 1.8| kW| | electronic heat charge control with room and/or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fan assisted heat output| N/A
At nominal heat output (fan motor)| el max| N/A| kW| | Type of heat output/room temperature control
At minimum heat output (fan motor)| el min| N/A| kW| | single-stage heat output and no room temperature control| no
In standby mode| else | 0| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| yes
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| yes
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, WallstraBe 16, 10 79, Berlin, Germany

SAFETY INSTRUCTIONS

• Read these operating instructions carefully before use and keep them for future reference.
• Install the electric fireplace in accordance with the provisions of this manual. If in doubt, consult customer service.
• Make sure the power outlet you want to use is easily accessible and not above the unit.
• Always turn the device off and unplug the power cord before moving, cleaning or servicing the unit.
• Fix the device securely so that it can not fall over.
• Do not leave the unit unattended when small children or elderly people are in the vicinity.
• Never leave children alone and unattended in the same room as the appliance when it is switched on.
• Do not cover the ventilation holes of the unit or block them. Never insert objects into the ventilation holes.
• Do not install the unit in rooms where running water is used, such as in bathrooms, kitchens, shower rooms, near swimming pools, etc.
• Never use sprays or steam cleaners to clean the unit.
• Never lay the device cable under carpets or in places where it may become a trip hazard.
• Do not install the device near curtains or other flammable materials.
• Do not use the device to dry clothes etc.
• Never sit or stand on the device.
• Never use the device in combination with timers or other devices that automatically turn on the device at a certain time.
  Note: The device has overheating protection. If the device stops due to overheating, do the following: turn off the device and disconnect the power plug from the wall outlet. If any objects are covering the device, remove them.

WARNING
Risk of burns! The device gets very hot, so do not touch it. Set all switches to “off” and allow it to cool completely. Once the unit has cooled down completely, you may reconnect the power plug to the power outlet. Never open the product. It has no user-serviceable parts.

CONTROL PANEL AND BUTTON FUNCTIONS

REMOTE CONTROL AND BUTTON FUNCTIONS

1. On / off switch
2. Increase value
3. Decrease value
4. Adjust the current week and time
5. Adjust the heating power
6. Switch the fl same effect and coal bed on or off
7. Set the timer
8. Set the timer parameters
9.  Turn on or off the open window function
10. Adjust the brightness of the coal bed
11.  Adjust the brightness of the flame

Note: The remote control requires 2 AAA batteries (not included with delivery). Open the battery compartment by sliding the cover down and inserting the batteries into the battery compartment according to the correct polarity.

GETTING STARTED

Insert the plug into the socket. Press the on / off switch on the lower right side of the device. If the device has been switched on, it can only be started via the remote control.
To do this, press the power button on the remote control.

Note: As soon as the device has been started via the remote control, it can be operated via the control panel on the bottom left of the device as well as via the remote control.

MANUAL OPERATION

Switch on the device via the main switch. The unit will beep once to indicate that it has been switched on. The device is now in standby mode. Once the device has been started via the remote control, it can be operated via the control panel in the lower-left corner of the device.

Adjust the heating power

• When you press the button for the first time, the unit will heat up with 1900 W of power. The heating power indicator will light up red.
• The second time you press the button, the unit will heat up to 950 W of power. The heating power indicator will light up blue.
• If you press the button a third time, the heating elements will be switched off and the heating power indicator will disappear.

Adjust the brightness

• When you press the button for the first time, the coal and the flames will be at the highest brightness level.
• If you press the button a second time, the coal and the flames will be at the middle brightness level.
• If you press the button a third time, the coal and the flames will be at the lowest brightness level.
• Pressing the button a fourth time will cause the coal and flames to go out.

OPERATION VIA REMOTE CONTROL

Note: When using the remote control, do not remove it more than 6 meters (19 feet) from the unit, making sure that the remote control is always oriented in the direction of
the unit.

Start the device
When you press the power button on the remote control, the screen of the remote control will turn on, the flame will ignite, and the flame icon will appear on the LCD screen.
Week, time (24h system) and the temperature display will be displayed normally. If you press the power button again, the LCD screen of the remote control will turn off.

Flame and coal control switch

• Pressing the button once when the unit is turned on will extinguish the flame and the coal bed, and the LCD screen will no longer display the icon.
• If you press this button again, the flame and the coal will start again and the screen will show the icon. When this button is pressed, the unit will beep once.

Adjust the flame brightness
Press this button to adjust the flame brightness. When this button is pressed, the unit will beep once.

Adjust the brightness of the coal bed
To adjust the brightness of the coal bed, press this button. The unit will beep once when the button is pressed.

Set the heating power

• When you press the button for the first time, the heating elements will operate at a power of 1900 W, the LCD screen will display and the heating power indicator lights up red.
• When you press the button the second time, the heating elements will operate at a power of 950 W, the LCD screen will display and the heating power indicator will light up blue.
• If you press the button a third time, the heating elements will be switched off, the LCD screen no longer displays the icon and the heating power indicator will turn off. The unit will beep once when the button is pressed.

Note: If the heating elements are switched on with the remote control, whether they are activated or not will depend on the temperature setting and the room temperature. The heating elements will only be activated if the temperature set by you on the device is above the room temperature.

Adjust the temperature setting
Press the arrow keys to adjust the temperature setting. You can set a temperature between 7 ° C and 30 ° C on the device. The device will beep once when one of the
keys is pressed.

Setting the current week and time >>

• If you press the button once, the corresponding symbol will light up on the LCD screen.
•  Now press the arrow buttons to set the current time and the week. When this button is pressed, the unit will not beep.

Adjust the timer parameters

When you press the button for the first time, the LCD screen will display “1” which stands for Monday. The temperature setting will start to flash.

• Press the arrow keys to set the temperature for Monday. Press the >> button to confirm and press the arrow buttons to set the start time of the heating.
• The screen will now show [00-23]. Press >> to set the start of the heating.
• The [:] indication means that the timer function is currently activated and that the temperature measured by the unit corresponds to the temperature setting.
• The [.] Indication means that the timer function is currently activated and the temperature measured by the unit corresponds to the temperature setting minus 3 °C.
• If the LCD screen does not show anything, this indicates that the timer function is disabled and the heating elements are not operating. The corresponding point will flash during the setting.

When you press the button a second time, the LCD screen displays „2“ for Tuesday.

Note: You may press this button up to seven times to set the temperature for the entire week. If you press the key an eighth time, you will exit the menu and the screen will
show the setting for the current day of the week.

Activate the timer function
If you press the timer button, the timer function will be activated.

• When you press the button for the first time, the screen will display and the timer indicator will light up green on the device.
• If you press the button again, the icon will disappear from the screen and the timer indicator on the unit will turn off.
• After activating the timer function, this will be based on the respective temperature settings
• The LCD screen will display these set parameters:

Note: If you want to change the time, week, and timer settings, you must turn the timer button on and off once to save the new data. When the device has received the new data, it will beep once.

Open window function

• If you press the button once, the screen will display the icon and the open window indicator on the device will turn amber.
•  If you press the button again, the icon will disappear from the screen and the indicator on the unit will turn off.
•  When this button is pressed, the unit will beep once.

After the open window function is activated, the device first checks whether the heating elements are currently active. If the heating elements are active, the program will save
the current room temperature values and measure the room temperature again every 12 minutes.

• If a temperature drop of more than 4 ° C is detected within 30 minutes, the program will automatically deactivate the heating elements as the device suspects an open window. The open window display on the device will flash.
• After the heating has been stopped for 70 minutes, the program will start again to check whether the window has been closed. The open window indicator on the device will slowly flash.
•  The unit now will now heat to 1900W for 6 minutes every 30 minutes. If the temperature rises more than 2 ° C during this period, the window will be assumed to be closed and the open window indicator on the unit will stop flashing.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must
not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.

Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>